Commit graph android_kernel_sony_sdm845/arch/x86/kernel/apic
Message SHA1
x86: Unify 3 similar ways of saving mp_irqs info
There are 3 places defining similar functions of saving IRQ vector
info into mp_irqs[] array: mmparse/acpi/mrst.

Replace the redundant code by a common function in io_apic.c as it's
only called when CONFIG_X86_IO_APIC=y

Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20101207133204.4d913c5a@feng-i7>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Feng Tang   authored and   Thomas Gleixner   commited 2010-12-09 21:52:06 +01:00
2d8009ba67
x86, ioapic: Avoid writing io_apic id if already correct
For 32bit mptable path, setup_ids_from_mpc() always writes the io_apic
id register, even there is no change needed.

Skip the write, when readout and mptable match.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
LKML-Reference: <4CFDF785.7010401@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Yinghai Lu   authored and   Thomas Gleixner   commited 2010-12-09 21:52:05 +01:00
60d79fd99f
x86, x2apic: Don't map lapic addr for preenabled x2apic systems
If x2apic is preenabled and used by the kernel, we don't need to map
the lapic address. That mapping will never be used.

So just skip that in register_lapic_address()

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
LKML-Reference: <4CFDF69C.9070501@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Yinghai Lu   authored and   Thomas Gleixner   commited 2010-12-09 21:52:05 +01:00
0450193bff
x86, apic: Use register_lapic_address() in init_apic_mapping()
Remove the printk as well, we don't want to print when nothing
changed. We print in register_lapic_address() already.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
LKML-Reference: <4CFDF68A.7020902@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Yinghai Lu   authored and   Thomas Gleixner   commited 2010-12-09 21:52:05 +01:00
326a2e6bae
x86, apic: Remove early_init_lapic_mapping()
It is almost the same as smp_register_lapic_addr(). We just need to
let smp_read_mpc() call smp_register_lapic_addr() when early==1.

Add the apic_printk to smp_register_lapic_address()

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
LKML-Reference: <4CFDF681.3030509@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Yinghai Lu   authored and   Thomas Gleixner   commited 2010-12-09 21:52:04 +01:00
f115714163
x86, apic: Unify identical register_lapic_address() functions
They are the same, move the common function to apic.c to allow
further cleanups.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Len Brown <lenb@kernel.org>
LKML-Reference: <4CFDF675.4060305@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Yinghai Lu   authored and   Thomas Gleixner   commited 2010-12-09 21:52:04 +01:00
c0104d38a7
Merge branch 'x86/amd-nb' into x86/apic-cleanups
Reason: apic cleanup series depends on x86/apic, x86/amd-nb x86/platform

Conflicts:
	arch/x86/include/asm/io_apic.h

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Thomas Gleixner   commited 2010-12-09 18:17:25 +01:00
d834a9dcec
x86: io_apic: Split setup_ioapic_ids_from_mpc()
Sodaville needs to setup the IO_APIC ids as the boot loader leaves
them uninitialized. Split out the setter function so it can be called
unconditionally from the sodaville board code.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20101126165020.GA26361@www.tglx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Sebastian Andrzej Siewior   authored and   Thomas Gleixner   commited 2010-12-06 14:30:28 +01:00
a38c5380ef
x86, apic: Remove double #include
Remove the second <asm/atomic.h> inclusion.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
LKML-Reference: <alpine.LNX.2.00.1011072253360.26247@swampdragon.chaosbits.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Jesper Juhl   authored and   Ingo Molnar   commited 2010-11-10 10:21:16 +01:00
2a8dcbd6cd
x86, UV: Update node controller MMRs
A new version of the SGI UV hub node controller is being
developed. A few of the MMRs (control registers) that exist on
the current hub no longer exist on the new hub. Fortunately,
there are alternate MMRs that are are functionally equivalent
and that exist on both hubs.

This patch changes the UV code to use MMRs that exist in BOTH
versions of the hub node controller.

Signed-off-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <20101106204056.GA27584@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Jack Steiner   authored and   Ingo Molnar   commited 2010-11-10 10:06:38 +01:00
62b0cfc240
x86: Check irq_remapped instead of remapping_enabled in destroy_irq()
Russ Anderson reported:
| There is a regression that is causing a NULL pointer dereference
| in free_irte when shutting down xpc. git bisect narrowed it down
| to git commit d585d06(intr_remap: Simplify the code further), which
| changed free_irte(). Reverse applying the patch fixes the problem.

We need to use irq_remapped() for each irq instead of checking only
intr_remapping_enabled as there might be non remapped irqs even when
remapping is enabled.

[ tglx: use cfg instead of retrieving it again. Massaged changelog ]

Reported-bisected-and-tested-by: Russ Anderson <rja@sgi.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <4CCBD511.40607@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Yinghai Lu   authored and   Thomas Gleixner   commited 2010-10-30 10:28:31 +02:00
7b79462a20
Merge branches 'x86-fixes-for-linus' and 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, alternative: Call stop_machine_text_poke() on all cpus
  x86-32: Restore irq stacks NUMA-aware allocations
  x86, memblock: Fix early_node_mem with big reserved region.

* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, uv: More Westmere support on SGI UV
  x86, uv: Enable Westmere support on SGI UV

Linus Torvalds   commited 2010-10-29 18:58:00 -07:00
2d10d8737c
x86, uv: More Westmere support on SGI UV
Enable Westmere support for all APIC modes on SGI UV.

Signed-off-by: Russ Anderson <rja@sgi.com>
LKML-Reference: <20101028224132.GB15804@sgi.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

Russ Anderson   authored and   H. Peter Anvin   commited 2010-10-28 22:38:07 -07:00
0520bd8438
Merge branch 'stable/xen-pcifront-0.8.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
and branch 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm

* 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm:
  xen: register xen pci notifier
  xen: initialize cpu masks for pv guests in xen_smp_init
  xen: add a missing #include to arch/x86/pci/xen.c
  xen: mask the MTRR feature from the cpuid
  xen: make hvc_xen console work for dom0.
  xen: add the direct mapping area for ISA bus access
  xen: Initialize xenbus for dom0.
  xen: use vcpu_ops to setup cpu masks
  xen: map a dummy page for local apic and ioapic in xen_set_fixmap
  xen: remap MSIs into pirqs when running as initial domain
  xen: remap GSIs as pirqs when running as initial domain
  xen: introduce XEN_DOM0 as a silent option
  xen: map MSIs into pirqs
  xen: support GSI -> pirq remapping in PV on HVM guests
  xen: add xen hvm acpi_register_gsi variant
  acpi: use indirect call to register gsi in different modes
  xen: implement xen_hvm_register_pirq
  xen: get the maximum number of pirqs from xen
  xen: support pirq != irq

* 'stable/xen-pcifront-0.8.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (27 commits)
  X86/PCI: Remove the dependency on isapnp_disable.
  xen: Update Makefile with CONFIG_BLOCK dependency for biomerge.c
  MAINTAINERS: Add myself to the Xen Hypervisor Interface and remove Chris Wright.
  x86: xen: Sanitse irq handling (part two)
  swiotlb-xen: On x86-32 builts, select SWIOTLB instead of depending on it.
  MAINTAINERS: Add myself for Xen PCI and Xen SWIOTLB maintainer.
  xen/pci: Request ACS when Xen-SWIOTLB is activated.
  xen-pcifront: Xen PCI frontend driver.
  xenbus: prevent warnings on unhandled enumeration values
  xenbus: Xen paravirtualised PCI hotplug support.
  xen/x86/PCI: Add support for the Xen PCI subsystem
  x86: Introduce x86_msi_ops
  msi: Introduce default_[teardown|setup]_msi_irqs with fallback.
  x86/PCI: Export pci_walk_bus function.
  x86/PCI: make sure _PAGE_IOMAP it set on pci mappings
  x86/PCI: Clean up pci_cache_line_size
  xen: fix shared irq device passthrough
  xen: Provide a variant of xen_poll_irq with timeout.
  xen: Find an unbound irq number in reverse order (high to low).
  xen: statically initialize cpu_evtchn_mask_p
  ...

Fix up trivial conflicts in drivers/pci/Makefile

Linus Torvalds   commited 2010-10-28 17:11:17 -07:00
18cb657ca1
x86, uv: Enable Westmere support on SGI UV
Enable Westmere support on SGI UV.  The UV initialization code is dependent on
the APICID bits.  Westmere-EX uses different APIC bit mapping than Nehalem-EX.
This code reads the apic shift value from a UV MMR to do the proper bit
decoding to determint the pnode.

Signed-off-by: Russ Anderson <rja@sgi.com>
LKML-Reference: <20101026212728.GB15071@sgi.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

Russ Anderson   authored and   H. Peter Anvin   commited 2010-10-26 15:15:28 -07:00
c8f730b1ab
x86: apic: Move probe_nr_irqs_gsi() into ioapic_init_mappings()
probe_br_irqs_gsi() is called right after ioapic_init_mappings() and
there are no other users. Move it into ioapic_init_mappings() so the
declaration can disappear and the function can become static.

Rename ioapic_init_mappings() to ioapic_and_gsi_init() to reflect that
change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1287510389-8388-2-git-send-email-dirk.brandewie@gmail.com>
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>

Thomas Gleixner   commited 2010-10-23 17:27:50 +02:00
23f9b26715
x86: Allow platforms to force enable apic
Some embedded x86 platforms don't setup the APIC in the
BIOS/bootloader and would be forced to add "lapic" on the kernel
command line. That's a bit akward.

Split out the force enable code from detect_init_APIC() and allow
platform code to call it from the platform setup. That avoids the
command line parameter and possible replication of the MSR dance in
the force enable code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1287510389-8388-1-git-send-email-dirk.brandewie@gmail.com>
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>

Thomas Gleixner   commited 2010-10-23 17:27:43 +02:00
5a7ae78fd4
Merge branch 'core-memblock-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-memblock-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (74 commits)
  x86-64: Only set max_pfn_mapped to 512 MiB if we enter via head_64.S
  xen: Cope with unmapped pages when initializing kernel pagetable
  memblock, bootmem: Round pfn properly for memory and reserved regions
  memblock: Annotate memblock functions with __init_memblock
  memblock: Allow memblock_init to be called early
  memblock/arm: Fix memblock_region_is_memory() typo
  x86, memblock: Remove __memblock_x86_find_in_range_size()
  memblock: Fix wraparound in find_region()
  x86-32, memblock: Make add_highpages honor early reserved ranges
  x86, memblock: Fix crashkernel allocation
  arm, memblock: Fix the sparsemem build
  memblock: Fix section mismatch warnings
  powerpc, memblock: Fix memblock API change fallout
  memblock, microblaze: Fix memblock API change fallout
  x86: Remove old bootmem code
  x86, memblock: Use memblock_memory_size()/memblock_free_memory_size() to get correct dma_reserve
  x86: Remove not used early_res code
  x86, memblock: Replace e820_/_early string with memblock_
  x86: Use memblock to replace early_res
  x86, memblock: Use memblock_debug to control debug message print out
  ...

Fix up trivial conflicts in arch/x86/kernel/setup.c and kernel/Makefile

Linus Torvalds   commited 2010-10-21 18:52:11 -07:00
3044100e58
apic, x86: Use BIOS settings for IBS and MCE threshold interrupt LVT offsets
We want the BIOS to setup the EILVT APIC registers. The offsets
were hardcoded and BIOS settings were overwritten by the OS.
Now, the subsystems for MCE threshold and IBS determine the LVT
offset from the registers the BIOS has setup. If the BIOS setup
is buggy on a family 10h system, a workaround enables IBS. If
the OS determines an invalid register setup, a "[Firmware Bug]:
" error message is reported.

We need this change also for upcomming cpu families.

Signed-off-by: Robert Richter <robert.richter@amd.com>
LKML-Reference: <1286360874-1471-3-git-send-email-robert.richter@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Robert Richter   authored and   Ingo Molnar   commited 2010-10-20 04:42:13 +02:00
27afdf2008
apic, x86: Check if EILVT APIC registers are available (AMD only)
This patch implements checks for the availability of LVT entries
(APIC500-530) and reserves it if used. The check becomes
necessary since we want to let the BIOS provide the LVT offsets.
 The offsets should be determined by the subsystems using it
like those for MCE threshold or IBS.  On K8 only offset 0
(APIC500) and MCE interrupts are supported. Beginning with
family 10h at least 4 offsets are available.

Since offsets must be consistent for all cores, we keep track of
the LVT offsets in software and reserve the offset for the same
vector also to be used on other cores. An offset is freed by
setting the entry to APIC_EILVT_MASKED.

If the BIOS is right, there should be no conflicts. Otherwise a
"[Firmware Bug]: ..." error message is generated. However, if
software does not properly determines the offsets, it is not
necessarily a BIOS bug.

Signed-off-by: Robert Richter <robert.richter@amd.com>
LKML-Reference: <1286360874-1471-2-git-send-email-robert.richter@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Robert Richter   authored and   Ingo Molnar   commited 2010-10-20 04:42:13 +02:00
a68c439b19
x86: ioapic: Call free_irte only if interrupt remapping enabled
On a system that support intr-rempping when booting with "intremap=off"

[  177.895501] BUG: unable to handle kernel NULL pointer dereference at 00000000000000f8
[  177.913316] IP: [<ffffffff8145fc18>] free_irte+0x47/0xc0
...
[  178.173326] Call Trace:
[  178.173574]  [<ffffffff810515b4>] destroy_irq+0x3a/0x75
[  178.192934]  [<ffffffff81051834>] arch_teardown_msi_irq+0xe/0x10
[  178.193418]  [<ffffffff81458dc3>] arch_teardown_msi_irqs+0x56/0x7f
[  178.213021]  [<ffffffff81458e79>] free_msi_irqs+0x8d/0xeb

Call free_irte only when interrupt remapping is enabled.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4CBCB274.7010108@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Yinghai Lu   authored and   Thomas Gleixner   commited 2010-10-19 09:25:33 +02:00
9717967c4b
x86: Introduce x86_msi_ops
Introduce an x86 specific indirect mechanism to setup MSIs.
The MSI setup functions become function pointers in an x86_msi_ops
struct, that defaults to the implementation in io_apic.c and msi.c.

[v2: Use HAVE_DEFAULT_* knobs]
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>

Stefano Stabellini   authored and   Konrad Rzeszutek Wilk   commited 2010-10-18 10:49:34 -04:00
294ee6f89c
x86/io_apic: add get_nr_irqs_gsi()
Impact: new interface to get max GSI

Add get_nr_irqs_gsi() to return nr_irqs_gsi.  Xen will use this to
determine how many irqs it needs to reserve for hardware irqs.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>

Jeremy Fitzhardinge   authored and   Konrad Rzeszutek Wilk   commited 2010-10-18 10:40:30 -04:00
7b586d7185
x86: Switch sparse_irq allocations to GFP_KERNEL
No callers from atomic context (except boot) anymore.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>

Thomas Gleixner   commited 2010-10-12 16:53:46 +02:00
2ee3906598
x86: Use sane enumeration
Instead of looping through all interrupts, use the bitmap lookup to
find the next.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>

Thomas Gleixner   commited 2010-10-12 16:53:44 +02:00
ad9f43340f
x86: uv: Clean up the direct access to irq_desc
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>

Thomas Gleixner   commited 2010-10-12 16:53:43 +02:00
48b2650196
x86: Make io_apic.c local functions static
No users outside of io_apic.c

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>

Thomas Gleixner   commited 2010-10-12 16:53:43 +02:00
1a8ce7ff68
x86: Speed up the irq_remapped check in hot pathes
irq_2_iommu is in struct irq_cfg, so we can do the irq_remapped check
based on irq_cfg instead of going through a lookup function. That's
especially interesting in the eoi_ioapic_irq() hotpath.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>

Thomas Gleixner   commited 2010-10-12 16:53:42 +02:00
1a0730d664
x86: io_apic: Remove the now unused sparse_irq arch_* functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>

Thomas Gleixner   commited 2010-10-12 16:53:40 +02:00
bc5fdf9f3a
x86: ioapic: Cleanup sparse irq code
Switch over to the new allocator and remove all the magic which was
caused by the unability to destroy irq descriptors. Get rid of the
create_irq_nr() loop for sparse and non sparse irq.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>

Thomas Gleixner   commited 2010-10-12 16:53:40 +02:00
fbc6bff04a
x86: Don't setup ioapic irq for sci twice
The sparseirq rework triggered a warning in the iommu code, which was
caused by setting up ioapic for ACPI irq 9 twice. This function is
solely to handle interrupts which are on a secondary ioapic and
outside the legacy irq range.

Replace the sparse irq_to_desc check with a non ifdeffed version.

[ tglx: Moved it before the ioapic sparse conversion and simplified
  	the inverse logic ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4CB00122.3030301@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>

Yinghai Lu   authored and   Thomas Gleixner   commited 2010-10-12 16:53:40 +02:00
fe6dab4e79
x86: io_apic: Prepare alloc/free_irq_cfg()
Rename the grossly misnamed get_one_free_irq_cfg() to alloc_irq_cfg().
Add a (not yet used) irq number argument to free_irq_cfg()

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>

Thomas Gleixner   commited 2010-10-12 16:53:40 +02:00
f981a3dc19
x86: Implement new allocator functions
Implement new allocator functions which make use of the core changes.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>

Thomas Gleixner   commited 2010-10-12 16:53:40 +02:00
08c33db6d0
x86: ioapic: Cleanup get_one_free_irq_cfg()
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>

Thomas Gleixner   commited 2010-10-12 16:53:39 +02:00
6e2fff50a5
x86: ioapic: Cleanup some more
Cleanup after the irq_chip conversion a bit.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>

Thomas Gleixner   commited 2010-10-12 16:53:39 +02:00
7e495529b6
x86: Convert ht set_affinity to new chip function
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>

Thomas Gleixner   commited 2010-10-12 16:53:39 +02:00
be5b7bf738
x86: Cleanup hpet affinity setting
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>

Thomas Gleixner   commited 2010-10-12 16:53:39 +02:00
0e09ddf2d7
x86: Convert dmar affinity setting to new chip function
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Cc: David Woodhouse <dwmw2@infradead.org>

Thomas Gleixner   commited 2010-10-12 16:53:39 +02:00
fe52b2d259
x86: Convert remapped msi to new chip.irq_set_affinity function
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>

Thomas Gleixner   commited 2010-10-12 16:53:38 +02:00
b5d1c46579
x86: Convert remapped ioapic affinity setting to new irq chip function
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>

Thomas Gleixner   commited 2010-10-12 16:53:38 +02:00
f19f5ecc92
x86: Convert msi affinity setting to new chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>

Thomas Gleixner   commited 2010-10-12 16:53:38 +02:00
5346b2a78f
x86: Prepare the affinity common functions for taking struct irq_data *
While at it rename it to sensible function names and fix the return
value from unsigned to int for __ioapic_set_affinity (set_desc_affinity).
Returning -1 in a function returning unsigned int is somewhat strange.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>

Thomas Gleixner   commited 2010-10-12 16:53:38 +02:00
f7e909eae4
x86: ioapic: Clean up the direct access to irq_desc
Most of it is useless pseudo optimization.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>

Thomas Gleixner   commited 2010-10-12 16:53:38 +02:00
60c69948e5
ht: Convert to new irq_chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>

Thomas Gleixner   commited 2010-10-12 16:53:37 +02:00
e9f7ac664b
dmar: Convert to new irq chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: David Woodhouse <dwmw2@infradead.org>

Thomas Gleixner   commited 2010-10-12 16:53:37 +02:00
5c2837fbaa
x86: ioapic/hpet: Convert to new chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>

Thomas Gleixner   commited 2010-10-12 16:53:37 +02:00
d0fbca8f93
x86: ioapic: Convert mask to new irq_chip function
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>

Thomas Gleixner   commited 2010-10-12 16:53:37 +02:00
90297c5fe7
x86: io_apic: Convert startup to new irq_chip function
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>

Thomas Gleixner   commited 2010-10-12 16:53:37 +02:00
61a38ce3f5
x86: Cleanup io_apic
Sanitize functions. Remove irq_desc pointer magic.
Preparatory patch for further cleanups.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>

Thomas Gleixner   commited 2010-10-12 16:53:36 +02:00
dd5f15e5cf
x86: Cleanup access to irq_data
Fixup the open coded access to 
      irq_desc->[handler_data|chip_data|msi-desc]

Use the macros and inline functions for it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>

Thomas Gleixner   commited 2010-10-12 16:53:36 +02:00
d4eba29770