C6x userspace supports a shared library mechanism called DSBT for systems with
no MMU. DSBT is similar to FDPIC in allowing shared text segments and private
copies of data segments without an MMU. Both methods access data using a base
register and offset. With FDPIC, the caller of an external function sets up the
base register for the callee. With DSBT, the called function sets up its own
base register. Other details differ but both userspaces need the same thing
from the kernel loader: a map of where each ELF segment was loaded. The FDPIC
loader already provides this, so DSBT just uses it.
This patch enables BINFMT_ELF_FDPIC by default for C6X and provides the
necessary architecture hooks for the generic loader.
Signed-off-by: Mark Salter <msalter@redhat.com>
Randomization of PIE load address is hard coded in binfmt_elf.c for X86
and ARM. Create a new Kconfig variable
(CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE) for this and use it instead. Thus
architecture specific policy is pushed out of the generic binfmt_elf.c and
into the architecture Kconfig files.
X86 and ARM Kconfigs are modified to select the new variable so there is
no change in behavior. A follow on patch will select it for MIPS too.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Daneyauthored and Linus Torvaldscommited 2012-01-10 16:30:51 -08:00
The userland ELF tools have been coping with partial-segments core files
for a few years now. Multiple distro builds are now setting this option.
It behooves everyone who ever deals with core files to have more info
dumped in there, especially as more and more people's compilers are
producing build IDs. Make it the default.
Anyone using older tools confused by these core files can configure this
option off, or just change /proc/PID/coredump_filter after boot.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roland McGrathauthored and Linus Torvaldscommited 2010-10-27 18:03:12 -07:00
Kernels that don't support ELF coredumps at all surely can't be supporting
new partial-segment flavored ELF coredumps ... don't make folk answer
Kconfig questions about that flavor.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Brownellauthored and Linus Torvaldscommited 2009-01-09 16:54:41 -08:00
This adds a kconfig option to change the /proc/PID/coredump_filter default.
Fedora has been carrying a trivial patch to change the hard-wired value for
this default, since Fedora 8. The default default can't change safely
because there are old GDB versions out there (all before 6.7) that are
confused by the core dump files created by the MMF_DUMP_ELF_HEADERS setting.
Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Kawai Hidehiro <hidehiro.kawai.ez@hitachi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roland McGrathauthored and Linus Torvaldscommited 2008-10-20 08:52:39 -07:00
HAVE_AOUT doesn't quite do the same thing as the recently removed
ARCH_SUPPORTS_AOUT config option. That was set even on platforms where
binfmt_aout isn't supported, although it's not entirely clear why.
So it's best just to introduce a new symbol, handled consistently with
other similar HAVE_xxx symbols; with a simple 'select' in the arch Kconfig.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
David Woodhousecommited 2008-09-06 19:30:22 +01:00
Fix the following compile error:
CC fs/binfmt_flat.o
In file included from
/home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:36:
/home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/flat.h:14:22: error: asm/flat.h: No such file or directory
/home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c: In function 'create_flat_tables':
/home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:124: error: implicit declaration of function 'flat_stack_align'
/home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:125: error: implicit declaration of function 'flat_argvp_envp_on_stack'
/home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c: In function 'calc_reloc':
/home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:347: error: implicit declaration of function 'flat_reloc_valid'
/home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c: In function 'load_flat_file':
/home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:479: error: implicit declaration of function 'flat_old_ram_flag'
/home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:755: error: implicit declaration of function 'flat_set_persistent'
/home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:757: error: implicit declaration of function 'flat_get_relocate_addr'
/home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:765: error: implicit declaration of function 'flat_get_addr_from_rp'
/home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:781: error: implicit declaration of function 'flat_put_addr_at_rp'
Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Tested-by: David Howells <dhowells@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adrian Bunkauthored and Linus Torvaldscommited 2008-06-06 11:29:08 -07:00
I have not yet seen anyone saying he has a reasonable use case for using
BINFMT_FLAT modular on his embedded device.
Considering that fs/binfmt_flat.c even lacks a MODULE_LICENSE() I really doubt
there is any, and this patch therefore makes BINFMT_FLAT a bool.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Bryan Wu <cooloney.lkml@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adrian Bunkauthored and Linus Torvaldscommited 2008-04-29 08:06:01 -07:00
Suppress A.OUT library support if CONFIG_ARCH_SUPPORTS_AOUT is not set.
Not all architectures support the A.OUT binfmt, so the ELF binfmt should not
be permitted to go looking for A.OUT libraries to load in such a case. Not
only that, but under such conditions A.OUT core dumps are not produced either.
To make this work, this patch also does the following:
(1) Makes the existence of the contents of linux/a.out.h contingent on
CONFIG_ARCH_SUPPORTS_AOUT.
(2) Renames dump_thread() to aout_dump_thread() as it's only called by A.OUT
core dumping code.
(3) Moves aout_dump_thread() into asm/a.out-core.h and makes it inline. This
is then included only where needed. This means that this bit of arch
code will be stored in the appropriate A.OUT binfmt module rather than
the core kernel.
(4) Drops A.OUT support for Blackfin (according to Mike Frysinger it's not
needed) and FRV.
This patch depends on the previous patch to move STACK_TOP[_MAX] out of
asm/a.out.h and into asm/processor.h as they're required whether or not A.OUT
format is available.
[jdike@addtoit.com: uml: re-remove accidentally restored code]
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howellsauthored and Linus Torvaldscommited 2008-02-08 09:22:30 -08:00
This adds Kconfig and Makefile bits to build fs/compat_binfmt_elf.c,
just added. Each arch that wants to use this file needs to add a
"select COMPAT_BINFMT_ELF" line in its Kconfig bits that enable COMPAT.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Roland McGrathauthored and Ingo Molnarcommited 2008-01-30 13:31:46 +01:00
Not really sure where this bogosity came from, but there's certainly
nothing special about sh that lets us use flat files with the MMU on.
Kill the dependency, and leave it as !MMU, like it is for all of the
other nommu-wielding ports.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bryan Wuauthored and Linus Torvaldscommited 2007-05-07 12:12:58 -07:00
Suppress configuration of certain features for the FRV arch as they can't be
built for FRV at the moment:
(*) RTC
(*) HISAX_*
(*) PARPORT_PC
(*) VGA_CONSOLE
(*) BINFMT_ELF
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
David Howellsauthored and Linus Torvaldscommited 2006-01-08 20:13:36 -08:00
Add CONFIG_X86_32 for i386. This allows selecting options that only apply
to 32-bit systems.
(X86 && !X86_64) becomes X86_32
(X86 || X86_64) becomes X86
Signed-off-by: Brian Gerst <bgerst@didntduck.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Brian Gerstauthored and Linus Torvaldscommited 2005-10-30 17:37:10 -08:00
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Mark Salter
commited 
David Daney
authored and
Linus Torvalds
commited 
Roland McGrath
authored and
David Brownell
authored and
Alexey Dobriyan
authored and
David Woodhouse
commited 
Paul Mundt
commited 
Adrian Bunk
authored and
David S. Miller
commited 
David Howells
authored and
Linus Torvalds
commited 
Ingo Molnar
commited 
Bryan Wu
authored and
Linus Torvalds
commited 
Brian Gerst
authored and
Linus Torvalds
commited