This patch updates the Linux the Intra-Site Automatic Tunnel Addressing
Protocol (ISATAP) implementation. It places the ISATAP potential router
list (PRL) in the kernel and adds three new private ioctls for PRL
management.
[Add several changes of structure name, constant names etc. - yoshfuji]
Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Templin, Fred Lauthored and YOSHIFUJI Hideakicommited 2008-04-03 10:05:58 +09:00
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (45 commits)
[VLAN]: Proc entry is not renamed when vlan device name changes.
[IPV6]: Fix ICMP relookup error path dst leak
[ATM] drivers/atm/iphase.c: compilation warning fix
IPv6: do not create temporary adresses with too short preferred lifetime
IPv6: only update the lifetime of the relevant temporary address
bluetooth : __rfcomm_dlc_close lock fix
bluetooth : use lockdep sub-classes for diffrent bluetooth protocol
[ROSE/AX25] af_rose: rose_release() fix
mac80211: correct use_short_preamble handling
b43: Fix PCMCIA IRQ routing
b43: Add DMA mapping failure messages
mac80211: trigger ieee80211_sta_work after opening interface
[LLC]: skb allocation size for responses
[IP] UDP: Use SEQ_START_TOKEN.
[NET]: Remove Documentation/networking/sk98lin.txt
[ATM] atm/idt77252.c: Make 2 functions static
[ATM]: Make atm/he.c:read_prom_byte() static
[IPV6] MCAST: Ensure to check multicast listener(s).
[LLC]: Kill llc_station_mac_sa symbol export.
forcedeth: fix locking bug with netconsole
...
This may lead to situations, when each of two proc entries produce
data for the other's device.
Looks like a BUG, so this patch is for net-2.6. It will not apply to
net-2.6.26 since dev->nd_net access is replaced with dev_net(dev)
one.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanovauthored and David S. Millercommited 2008-04-02 00:08:01 -07:00
When we encounter an error while looking up the dst the second
time we need to drop the first dst. This patch is pretty much
the same as the one for IPv4.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xuauthored and David S. Millercommited 2008-04-02 00:06:09 -07:00
From RFC341:
A temporary address is created only if this calculated Preferred
Lifetime is greater than REGEN_ADVANCE time units. In particular, an
implementation must not create a temporary address with a zero
Preferred Lifetime.
Signed-off-by: Benoit Boissinot <benoit.boissinot@ens-lyon.org>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Benoit Boissinotauthored and David S. Millercommited 2008-04-02 00:01:35 -07:00
When receiving a prefix information from a routeur, only update the
lifetimes of the temporary address associated with that prefix.
Otherwise if one deprecated prefix is advertized, all your temporary
addresses will become deprecated.
Signed-off-by: Benoit Boissinot <benoit.boissinot@ens-lyon.org>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Benoit Boissinotauthored and David S. Millercommited 2008-04-02 00:00:58 -07:00
rose_release() doesn't release sockets properly, e.g. it skips
sock_orphan(), so OOPSes are triggered in sock_def_write_space(),
which was observed especially while ROSE skbs were kfreed from
ax25_frames_acked(). There is also sock_hold() and lock_sock() added -
similarly to ax25_release(). Thanks to Bernard Pidoux for substantial
help in debugging this problem.
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Reported-and-tested-by: Bernard Pidoux <bpidoux@free.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jarek Poplawskiauthored and David S. Millercommited 2008-04-01 23:56:17 -07:00
This allows cleaner code when accesing bss->mesh_config components.
Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis Carlos Coboauthored and John W. Linvillecommited 2008-04-01 17:14:12 -04:00
Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis Carlos Coboauthored and John W. Linvillecommited 2008-04-01 17:14:11 -04:00
The bug shows up with CONFIG_PREEMPT enabled. Pointed out by Andrew Morton.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis Carlos Coboauthored and John W. Linvillecommited 2008-04-01 17:14:11 -04:00
A variable 'i' is being shadowed by another one, but the second
one can just be removed.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Vladimir Koutny <vlado@work.ksp.sk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Bergauthored and John W. Linvillecommited 2008-04-01 17:14:10 -04:00
When the IBSS code tries to flush the STA list, it does so in
an atomic context. Flushing isn't safe there, however, and
requires the RTNL, so we need to defer it to a workqueue.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Bergauthored and John W. Linvillecommited 2008-04-01 17:14:10 -04:00
Calling sta_info_destroy() doesn't require RCU-synchronisation
before-hand because it does that internally. However, it does
require rtnl-locking so insert that where necessary.
Also clean up the code doing it internally to be a bit clearer and
not synchronize twice if keys are configured.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Bergauthored and John W. Linvillecommited 2008-04-01 17:14:10 -04:00
When STA structure insertion fails, it has been allocated but isn't
really alive yet, it isn't reachable by any other code and also can't
yet have much configured. This patch changes the code so that when
the insertion fails, the resulting STA pointer is no longer valid
because it is freed.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Bergauthored and John W. Linvillecommited 2008-04-01 17:14:10 -04:00
sta_info_destroy(NULL) should be valid, but currently isn't because
the argument is dereferenced before the NULL check. There are no
users that currently pass in NULL, i.e. all check before calling the
function, but I want to change that.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Bergauthored and John W. Linvillecommited 2008-04-01 17:14:09 -04:00
When joining a new IBSS, all old stations are flushed, but currently
all stations belonging to all virtual interfaces are flushed, which
is wrong. This patch fixes it.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Bergauthored and John W. Linvillecommited 2008-04-01 17:14:09 -04:00
This bool causes my gcc-4.1.0 alpha cross compiler to go into an infinite
loop. Switching it to u8 works around that.
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Luis Carlos Cobo <luisca@cozybit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Andrew Mortonauthored and John W. Linvillecommited 2008-04-01 17:13:17 -04:00
ERP IE bit for preamble mode is 0 for short and 1 for long, not the other
way around. This fixes the value reported to the driver via
bss_conf->use_short_preamble field.
Signed-off-by: Vladimir Koutny <vlado@ksp.sk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Vladimir Koutnyauthored and John W. Linvillecommited 2008-04-01 15:44:08 -04:00
ieee80211_sta_work is disabled while network interface
is down. Therefore, if you configure wireless parameters
before bringing the interface up, these configurations are
not yet effective and association fails.
A workaround from userspace is calling a command like
'iwconfig wlan0 ap any' after the interface is brought up.
To fix this behaviour, trigger execution of ieee80211_sta_work from
ieee80211_open when in STA or IBSS mode.
Signed-off-by: Jan Niehusmann <jan@gondor.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Jan Niehusmannauthored and John W. Linvillecommited 2008-04-01 15:44:07 -04:00
Allocate the skb for llc responses with the received packet size by
using the size adjustable llc_frame_alloc.
Don't allocate useless extra payload.
Cleanup magic numbers.
So, this fixes oops.
Reported by Jim Westfall:
kernel: skb_over_panic: text:c0541fc7 len:1000 put:997 head:c166ac00 data:c166ac2f tail:0xc166b017 end:0xc166ac80 dev:eth0
kernel: ------------[ cut here ]------------
kernel: kernel BUG at net/core/skbuff.c:95!
Signed-off-by: Joonwoo Park <joonwpark81@gmail.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joonwoo Parkauthored and David S. Millercommited 2008-03-31 21:02:47 -07:00
Do with the sockstat6 file what we've already done for the sockstat.
Same good side effect - ipv6 reassembling stats are now shown per-net.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanovauthored and David S. Millercommited 2008-03-31 19:43:43 -07:00
Besides, now we can see per-net fragments statistics in the
same file, since this stats is already per-net.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanovauthored and David S. Millercommited 2008-03-31 19:43:18 -07:00
Currently they live in init_net only, but now almost all the info
they can provide is available per-net.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanovauthored and David S. Millercommited 2008-03-31 19:42:37 -07:00
Such an accounting would cost us two more dereferences to get the
percpu variable from the struct net, so I make sock_prot_inuse_get
and _add calls work differently depending on CONFIG_NET_NS - without
it old optimized routines are used.
The per-cpu counter for init_net is prepared in core_initcall, so
that even af_inet, that starts as fs_initcall, will already have the
init_net prepared.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanovauthored and David S. Millercommited 2008-03-31 19:42:16 -07:00
This counter is about to become per-proto-and-per-net, so we'll need
two arguments to determine which cell in this "table" to work with.
All the places, but proc already pass proper net to it - proc will be
tuned a bit later.
Some indentation with spaces in proc files is done to keep the file
coding style consistent.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanovauthored and David S. Millercommited 2008-03-31 19:41:46 -07:00
There's already some stuff on the struct net, that should better
be folded into netns_core structure. I'm making the per-proto inuse
counter be per-net also, which is also a candidate for this, so
introduce this structure and populate it a bit.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanovauthored and David S. Millercommited 2008-03-31 19:41:14 -07:00
In ip6_mc_input(), we need to check whether we have listener(s) for
the packet.
After commit ae7bf20a63, all packets
for multicast destinations are delivered to upper layer if
IFF_PROMISC or IFF_ALLMULTI is set.
In fact, bug was rather ancient; the original (before the commit)
intent of the dev->flags check was to skip the ipv6_chk_mcast_addr()
call, assuming L2 filters packets appropriately, but it was even not
true.
Let's explicitly check our multicast list.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Acked-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideakiauthored and David S. Millercommited 2008-03-31 19:30:45 -07:00
Replace seq_open with seq_open_net and remove udp_seq_release
completely. seq_release_net will do this job just fine.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Denis V. Lunevauthored and David S. Millercommited 2008-03-28 18:25:06 -07:00
No need to create seq_operations for each instance of 'netstat'.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Denis V. Lunevauthored and David S. Millercommited 2008-03-28 18:24:26 -07:00
udp_proc_register/udp_proc_unregister are called with a static pointer only.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Denis V. Lunevauthored and David S. Millercommited 2008-03-28 18:24:01 -07:00
An uppercut - do not use the pcounter on struct proto.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanovauthored and David S. Millercommited 2008-03-28 16:39:33 -07:00
Constructive part of the set is finished here. We have to remove the
pcounter, so start with its init and free functions.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanovauthored and David S. Millercommited 2008-03-28 16:39:10 -07:00
YOSHIFUJI Hideaki
commited 
Templin, Fred L
authored and
Linus Torvalds
commited 
Pavel Emelyanov
authored and
David S. Miller
commited 
Herbert Xu
authored and
Benoit Boissinot
authored and
Dave Young
authored and
Jarek Poplawski
authored and
Luis Carlos Cobo
authored and
John W. Linville
commited 
Johannes Berg
authored and
Andrew Morton
authored and
Vladimir Koutny
authored and
Jan Niehusmann
authored and
Joonwoo Park
authored and
Al Viro
authored and
Denis V. Lunev
authored and