Add support for the 965G and 965GM graphic chipsets to the intelfb driver. I
have a notebook with an Intel Mobile GM965/GL960 Integrated Graphics
Controller and with the attached patch the framebuffer comes up. I have
tested it a bit with DirectFB to make sure it is working stable.
I also have an Intel Mobile GM945 and I compared the results, the programming
interface of the 9xx series from Intel is mostly the same, so I think the
patch should add all the functionality which the 945GM has.
Signed-off-by: Maik Broemme <mbroemme@plusserver.de>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Antonino Daplas <adaplas@pol.net>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Maik Broemmeauthored and Linus Torvaldscommited 2008-04-28 08:58:41 -07:00
* Convert files to UTF-8.
* Also correct some people's names
(one example is Eißfeldt, which was found in a source file.
Given that the author used an ß at all in a source file
indicates that the real name has in fact a 'ß' and not an 'ss',
which is commonly used as a substitute for 'ß' when limited to
7bit.)
* Correct town names (Goettingen -> Göttingen)
* Update Eberhard Mönkeberg's address (http://lkml.org/lkml/2007/1/8/313)
Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Jan Engelhardtauthored and Adrian Bunkcommited 2007-10-19 23:21:04 +02:00
Intel FB: allow odd- and even-field-first in interlaced modes, and
proper sync to vertical retrace
Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: <sylvain.meyer@worldonline.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Krzysztof Halasaauthored and Linus Torvaldscommited 2007-10-16 09:43:20 -07:00
Intel FB: the chip adds two halflines automatically in interlaced mode,
force even line count for the right timings.
Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: <sylvain.meyer@worldonline.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Krzysztof Halasaauthored and Linus Torvaldscommited 2007-10-16 09:43:20 -07:00
Intel framebuffer now supports interlaced video modes.
Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Krzysztof Halasaauthored and Linus Torvaldscommited 2007-10-16 09:43:18 -07:00
Intel framebuffer mis-calculated pixel clocks.
The pixel clock (and thus both H and V sync) will be slower than requested, so
if you set the minimum allowed the display may not sync. In case of really
old CRT display it could theoretically damage it.
I'm using it with PAL TV (using RGB input - SCART connector) and the bug
prevented it from working at all (TV requirements are more strict and made the
bug visible).
Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Krzysztof Halasaauthored and Linus Torvaldscommited 2007-09-11 17:21:27 -07:00
The pseudo_palette is only 16 elements long.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Antonino A. Daplasauthored and Linus Torvaldscommited 2007-07-17 10:23:12 -07:00
If there is less than RING_MIN_FREE available in the ring buffer,
dinfo->ring_space is set to a big value forcing wait_ring to return.
Fix by making ring space = 0 if ring space < RING_MIN_FREE.
Signed-off-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Orczykowski, Juergenauthored and Linus Torvaldscommited 2007-05-08 11:15:26 -07:00
This shrinks the size of "struct i2c_client" by 40 bytes:
- Substantially shrinks the string used to identify the chip type
- The "flags" don't need to be so big
- Removes some internal padding
It also adds kerneldoc for that struct, explaining how "name" is really a
chip type identifier; it's otherwise potentially confusing.
Because the I2C_NAME_SIZE symbol was abused for both i2c_client.name
and for i2c_adapter.name, this needed to affect i2c_adapter too. The
adapters which used that symbol now use the more-obviously-correct
idiom of taking the size of that field.
JD: Shorten i2c_adapter.name from 50 to 48 bytes while we're here, to
avoid wasting space in padding.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
David Brownellauthored and Jean Delvarecommited 2007-05-01 23:26:28 +02:00
After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there. Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.
To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.
Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm. I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).
Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tim Schmielauauthored and Linus Torvaldscommited 2007-02-14 08:09:54 -08:00
All callers and the function itself dereference dinfo, so we can remove the
check. (coverity id #1371)
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dave Airlie <airlied@linux.ie>
Eric Sesterhennauthored and Dave Airliecommited 2006-10-25 12:05:18 -07:00
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.
The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around. On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).
Where appropriate, an arch may override the generic storage facility and do
something different with the variable. On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.
Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions. Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller. A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.
I've build this code with allyesconfig for x86_64 and i386. I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.
This will affect all archs. Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:
struct pt_regs *old_regs = set_irq_regs(regs);
And put the old one back at the end:
set_irq_regs(old_regs);
Don't pass regs through to generic_handle_irq() or __do_IRQ().
In timer_interrupt(), this sort of change will be necessary:
- update_process_times(user_mode(regs));
- profile_tick(CPU_PROFILING, regs);
+ update_process_times(user_mode(get_irq_regs()));
+ profile_tick(CPU_PROFILING);
I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().
Some notes on the interrupt handling in the drivers:
(*) input_dev() is now gone entirely. The regs pointer is no longer stored in
the input_dev struct.
(*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does
something different depending on whether it's been supplied with a regs
pointer or not.
(*) Various IRQ handler function pointers have been moved to type
irq_handler_t.
Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
* 'intelfb-patches' of master.kernel.org:/pub/scm/linux/kernel/git/airlied/intelfb-2.6:
intelfbhw.c: intelfbhw_get_p1p2 defined but not used
intelfb: fix mtrr_reg signedness
intelfb: update doc and Kconfig (supported devices)
intelfb: add preliminary i2c support
intelfb: add preliminary i2c support
intelfb: add preliminary i2c support
intelfb: add preliminary i2c support
intelfb: add preliminary i2c support
intelfb: add preliminary i2c support
intelfb: add preliminary i2c support
intelfb: add preliminary i2c support
intelfb: add vsync interrupt support
intelfb: add vsync interrupt support
intelfb: add vsync interrupt support
intelfb: add vsync interrupt support
intelfb: add vsync interrupt support
intelfbhw_get_p1p2 is used only if REGDUMP is defined - compile it in only
if REGDUMP is defined - one less compiler warning.
Signed-off-by: Dave Airlie <airlied@linux.ie>
Parag Warudkarauthored and Dave Airliecommited 2006-08-22 10:12:58 +10:00
MAX_NR_CONSOLES, fg_console, want_console and last_console are more of a
function of the VT layer than the TTY one. Moving these to vt.h and vt_kern.h
allows all of the framebuffer and VT console drivers to remove their
dependency on tty.h.
[akpm@osdl.org: fix alpha build]
Signed-off-by: Jon Smirl <jonsmir@gmail.com>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jon Smirlauthored and Linus Torvaldscommited 2006-07-10 13:24:16 -07:00
[07/07] intelfb: adds an option to enable I2C support in the intelfb driver. Also adds
the intel_i2c.c file to the Makefile.
Signed-off-by: Dennis Munsie <dmunsie@cecropia.com>
Dennis Munsieauthored and Dave Airliecommited 2006-07-03 19:04:37 +10:00
[06/07] intelfb: adds intelfb_i2c.c which contains the infrastructure needed to
enumerate the i2c busses on the intelfb.
Signed-off-by: Dennis Munsie <dmunsie@cecropia.com>
Dennis Munsieauthored and Dave Airliecommited 2006-07-03 19:04:37 +10:00
[05/05] intelfb: Honor FB_ACTIVATE_VBL for display panning
Extends the intelfb_vsync struct to store panning offset. The interrupt service routine uses the stored panning offset if a pan is requested for the vsync. intelfbhw_disable_irq also pans the display if there is a pending request.
Signed-off-by: Eric Hustvedt <ehustvedt@cecropia.com>
Eric Hustvedtauthored and Dave Airliecommited 2006-07-03 18:59:47 +10:00
[04/05] intelfb: implement FBIO_WAITFORVSYNC ioctl
The (unofficial) FBIO_WAITFORVSYNC ioctl is implemented by sleeping on the appropriate waitqueue, as defined in my earlier patch. Currently, only display 0 (aka pipe A) is supported.
Signed-off-by: Eric Hustvedt <ehustvedt@cecropia.com>
Eric Hustvedtauthored and Dave Airliecommited 2006-07-03 18:59:46 +10:00
[03/05] intelfb: Implement basic interrupt handling
Functions have been added to enable and disable interrupts using the MMIO registers. Currently only pipe A vsync interrupts are enabled.
A generalized vsync accounting struct is defined, with the intent that it can encapsulate per-pipe vsync related info in the future. Currently a single instance is hard-coded.
The interrupt service routine currently only looks for vsync interrupts on pipe A, and increments a counter and wakes up anyone waiting on it.
This implementation is heavily influenced by similar implementations in the atyfb and matroxfb drivers.
Signed-off-by: Eric Hustvedt <ehustvedt@cecropia.com>
Eric Hustvedtauthored and Dave Airliecommited 2006-07-03 18:59:46 +10:00
[02/05] intelfb: Add interrupt related register definitions
Add constants for accessing HWSTAM, IER, IIR, and IMR registers.
Add constants for interrupt types supported by the 8xx and 9xx chipsets.
The registers are also stored in the hwstate struct and dumped in the debug routine.
Signed-off-by: Eric Hustvedt <ehustvedt@cecropia.com>
Eric Hustvedtauthored and Dave Airliecommited 2006-07-03 18:59:46 +10:00
[01/05] intelfb: Add 16-bit register access macros
This patch adds macros to read and write two-byte MMIO registers. The interrupt-related registers are all word-sized, rather than long-sized.
Signed-off-by: Eric Hustvedt <ehustvedt@cecropia.com>
Eric Hustvedtauthored and Dave Airliecommited 2006-07-03 18:59:46 +10:00
ring_head is offset in card memory, not iomem pointer. Fixed, removed
fuckloads of amazingly bogus casts somebody had sprinkled all over the
place.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dave Airlie <airlied@linux.ie>
Al Viroauthored and Dave Airliecommited 2006-06-24 17:22:17 +10:00
intelfb driver -- use the regular modedb table instead of the VESA modedb
table. Ideally, the 9xx stride patch should be applied first, since there
are modes in the VESA table that won't work without that patch.
Signed-off-by: Dennis Munsie <dmunsie@cecropia.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
Dennis Munsieauthored and Dave Airliecommited 2006-05-29 18:58:09 +10:00
Use firmware EDID for the driver's private mode database.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Cc: Sylvain Meyer <sylvain.meyer@worldonline.fr>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dave Airlie <airlied@linux.ie>
Antonino A. Daplasauthored and Dave Airliecommited 2006-05-29 18:49:08 +10:00
Fix integer option parsing in the intelfb driver. The macro wasn't
accounting for the equal sign past the option name. As a result,
the vram option always returned 0.
Signed-off-by: Eric Hustvedt <ehustvedt@cecropia.com>
Signed-off-by: Dennis Munsie <dmunsie@cecropia.com
Signed-off-by: Dave Airlie <airlied@linux.ie>
Eric Hustvedtauthored and Dave Airliecommited 2006-05-29 18:38:55 +10:00
Maik Broemme
authored and
Linus Torvalds
commited 
Jeff Garzik
authored and
Linus Torvalds
commited 
Joe Perches
authored and
Adrian Bunk
commited 
Jan Engelhardt
authored and
H. Peter Anvin
commited 
Krzysztof Halasa
authored and
Antonino A. Daplas
authored and
Orczykowski, Juergen
authored and
David Brownell
authored and
Jean Delvare
commited 
Thomas Gleixner
authored and
Tim Schmielau
authored and
Jiri Slaby
authored and
Jean Delvare
commited 
Alexey Dobriyan
authored and
Linus Torvalds
commited 
Eric Sesterhenn
authored and
Dave Airlie
commited 
Alan Cox
authored and
David Howells
commited 
Dave Jones
commited 
Linus Torvalds
commited 
Parag Warudkar
authored and
Jon Smirl
authored and
Dennis Munsie
authored and
Eric Hustvedt
authored and
Jörn Engel
authored and
Adrian Bunk
commited 
Al Viro
authored and