A check for unmapped apic was added before reading maxlvt but the early
read of maxlvt wasn't removed.
Signed-off-by: Chuck Ebbert <cebbert@redhat.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@kernel.org
Chuck Ebbertauthored and Thomas Gleixnercommited 2008-05-23 14:08:06 +02:00
Remove the magic number in the third argment of div_sc().
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Akinobu Mitaauthored and Ingo Molnarcommited 2008-04-26 17:35:47 +02:00
UV supports really big systems. So big, in fact, that the APICID register
does not contain enough bits to contain an APICID that is unique across all
cpus.
The UV BIOS supports 3 APICID modes:
- legacy mode. This mode uses the old APIC mode where
APICID is in bits [31:24] of the APICID register.
- x2apic mode. This mode is whitebox-compatible. APICIDs
are unique across all cpus. Standard x2apic APIC operations
(Intel-defined) can be used for IPIs. The node identifier
fits within the Intel-defined portion of the APICID register.
- x2apic-uv mode. In this mode, the APICIDs on each node have
unique IDs, but IDs on different node are not unique. For example,
if each mode has 32 cpus, the APICIDs on each node might be
0 - 31. Every node has the same set of IDs.
The UV hub is used to route IPIs/interrupts to the correct node.
Traditional APIC operations WILL NOT WORK.
In x2apic-uv mode, the ACPI tables all contain a full unique ID (note:
exact bit layout still changing but the following is close):
nnnnnnnnnnlc0cch
n = unique node number
l = socket number on board
c = core
h = hyperthread
Only the "lc0cch" bits are written to the APICID register. The remaining bits are
supplied by having the get_apic_id() function "OR" the extra bits into the value
read from the APICID register. (Hmmm.. why not keep the ENTIRE APICID register
in per-cpu data....)
The x2apic-uv mode is recognized by the MADT table containing:
oem_id = "SGI"
oem_table_id = "UV-X"
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Jack Steinerauthored and Ingo Molnarcommited 2008-04-17 17:41:33 +02:00
Introduce a function to read the local APIC_ID.
This change is in preparation for additional changes to
the APICID functions that will come in a later patch.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Jack Steinerauthored and Ingo Molnarcommited 2008-04-17 17:41:33 +02:00
Indicate TSCs are unreliable as time sources if the platform is
a multi chassi ScaleMP vSMPowered machine.
Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ravikiran G Thirumalaiauthored and Ingo Molnarcommited 2008-04-17 17:41:08 +02:00
This is to match i386. The former name was cuter,
but the current is more meaningful and more general,
since cpu_id can be a logical id.
Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Glauber de Oliveira Costaauthored and Ingo Molnarcommited 2008-04-17 17:41:02 +02:00
When acpi=off or there is no SRAT defined, apicid_to_node is got from K8
Northbridge PCI configuration space in k8_scan_nodes() in
arch/x86_64/mm/k8toplogy.c.
The problem is that it assumes bsp apic id is 0 at that point.
For four socket system with Quad core cpus installed, all cpus apic id
is offset by 4, and bsp apic id is 4.
For eight socket system with dual core cpus installed, all cpus apic id
is offset by 2, and bsp apic id is 2.
We need get boot_cpu_id --- bsp apic id, before k8_scan_nodes by called.
So create early_acpi_boot_init and early_get_smp_config for get boot_cpu_id.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Yinghai Luauthored and Ingo Molnarcommited 2008-04-17 17:40:58 +02:00
quad core 8 socket system will have apic id lifting.the apic id range could
be [4, 0x23]. and apic_is_clustered_box will think that need to three clusters
and that is larger than 2. So it is treated as a clustered_box.
and will get:
Marking TSC unstable due to TSCs unsynchronized
even if the CPUs have X86_FEATURE_CONSTANT_TSC set.
this quick fix will check if the cpu is from AMD.
but vsmp still needs that checking...
this patch is fix to make sure that vsmp not to be passed.
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Yinghai Luauthored and Ingo Molnarcommited 2008-04-17 17:40:50 +02:00
when comparing the e820 direct from BIOS, and the one by kexec:
BIOS-provided physical RAM map:
- BIOS-e820: 0000000000000000 - 0000000000097400 (usable)
+ BIOS-e820: 0000000000000100 - 0000000000097400 (usable)
BIOS-e820: 0000000000097400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dffa0000 (usable)
- BIOS-e820: 00000000dffae000 - 00000000dffb0000 type 9
+ BIOS-e820: 00000000dffae000 - 00000000dffb0000 (reserved)
BIOS-e820: 00000000dffb0000 - 00000000dffbe000 (ACPI data)
BIOS-e820: 00000000dffbe000 - 00000000dfff0000 (ACPI NVS)
BIOS-e820: 00000000dfff0000 - 00000000e0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
- BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
=======> that is the local apic address... somewhere we lost it
BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000004020000000 (usable)
found one entry about reserved is missing for the kernel by kexec.
it turns out init_apic_mappings is called before e820_reserve_resources
in setup_arch. but e820_reserve_resources is using request_resource.
it will not handle the conflicts.
there are three ways to fix it:
1. change request_resource in e820_reserve_resources to to insert_resource
2. move init_apic_mappings after e820_reserve_resources
3. use late_initcall to insert lapic resource.
this patch is using method 3, that is less intrusive.
in later version could consider to use method 1.
before patch
fed20000-ffffffff : PCI Bus #00
fee00000-fee00fff : Local APIC
fefff000-feffffff : pnp 00:09
ff700000-ffffffff : reserved
with patch will get map in first kernel
fed20000-ffffffff : PCI Bus #00
fee00000-fee00fff : Local APIC
fee00000-fee00fff : reserved
fefff000-feffffff : pnp 00:09
ff700000-ffffffff : reserved
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Yinghai Luauthored and Ingo Molnarcommited 2008-04-17 17:40:49 +02:00
quad core 8 socket system will have apic id lifting.the apic id range could
be [4, 0x23]. and apic_is_clustered_box will think that need to three clusters
and that is large than 2. So it is treated as clustered_box.
and will get
Marking TSC unstable due to TSCs unsynchronized
even the CPUs have X86_FEATURE_CONSTANT_TSC set.
this patch will check if the cpu is from AMD.
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Yinghai Luauthored and Ingo Molnarcommited 2008-04-17 17:40:49 +02:00
Change static bios_cpu_apicid array to a per_cpu data variable.
This includes using a static array used during initialization
similar to the way x86_cpu_to_apicid[] is handled.
There is one early use of bios_cpu_apicid in apic_is_clustered_box().
The other reference in cpu_present_to_apicid() is called after
smp_set_apicids() has setup the percpu version of bios_cpu_apicid.
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
travis@sgi.comauthored and Ingo Molnarcommited 2008-01-30 13:33:21 +01:00
When the kernel panics early for some unrelated reason
there would be eventually an early exception inside panic because
clear_local_APIC tried to disable the not yet mapped APIC.
Check for that explicitely.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Andi Kleenauthored and Ingo Molnarcommited 2008-01-30 13:33:17 +01:00
Change static bios_cpu_apicid array to a per_cpu data variable.
This includes using a static array used during initialization
similar to the way x86_cpu_to_apicid[] is handled.
There is one early use of bios_cpu_apicid in apic_is_clustered_box().
The other reference in cpu_present_to_apicid() is called after
smp_set_apicids() has setup the percpu version of bios_cpu_apicid.
[ mingo@elte.hu: build fix ]
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
travis@sgi.comauthored and Ingo Molnarcommited 2008-01-30 13:33:12 +01:00
The check for an unitialized clock event device triggers, when the local
apic timer is registered as a dummy clock event device for broadcasting.
Preset the multiplicator to avoid a false positive.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Thomas Gleixnerauthored and Ingo Molnarcommited 2008-01-30 13:33:04 +01:00
Check the APIC timer calibration result for sanity. When the frequency
is out of range, issue a warning and disable the local APIC timer.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Thomas Gleixnerauthored and Ingo Molnarcommited 2008-01-30 13:33:04 +01:00
White space and coding style clean up.
Make apic_32/64.c similar.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Hiroshi Shimamotoauthored and Ingo Molnarcommited 2008-01-30 13:32:35 +01:00
Its previous use in a call to on_each_cpu() was pointless, as at the
time that code gets executed only one CPU is online. Further, the
function can be __cpuinit, and for this to work without
CONFIG_HOTPLUG_CPU setup_nmi() must also get an attribute (this one
can even be __init; on 64-bits check_timer() also was lacking that
attribute).
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Jan Beulichauthored and Ingo Molnarcommited 2008-01-30 13:31:24 +01:00
The patch to suppress bitops-related warnings added a pile of ugly
casts. Many of these were related to the management of x86 CPU
capabilities. Clean these up by adding specific set/clear_cpu_cap
macros, and use them consistently.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Jeremy Fitzhardingeauthored and Ingo Molnarcommited 2008-01-30 13:30:55 +01:00
Earlier patch added IO APIC setup into local APIC setup. This caused
modpost warnings. Fix them by untangling setup_local_APIC() and splitting
it into smaller functions. The IO APIC initialization is only called
for the BP init.
Also removed some outdated debugging code and minor cleanup.
[ tglx: arch/x86 adaptation ]
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Andi Kleenauthored and Ingo Molnarcommited 2008-01-30 13:30:40 +01:00
4 socket quad core, 8 socket quad core will do apic ID lifting for BSP.
But io-apic regs for ExtINT still use 0 as dest.
so when we enable apic error vector in BSP, we will get one APIC error.
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/4 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
enabled ExtINT on CPU#0
ESR value after enabling vector: 00000000, after 0000000c
APIC error on CPU0: 0c(08)
ENABLING IO-APIC IRQs
Synchronizing Arb IDs.
So move enable_IO_APIC from setup_IO_APIC into setup_local_APIC and call it
before enabling the ACPI error vector.
[ tglx: arch/x86 adaptation ]
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Yinghai Luauthored and Ingo Molnarcommited 2008-01-30 13:30:39 +01:00
Match i386, where we have this in the irq code. It belongs there.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Thomas Gleixnerauthored and Ingo Molnarcommited 2008-01-30 13:30:19 +01:00
The commit 399287229c hacked the
ioapic resource mapping into apic.c for no good reason.
Move the code into io_apic_64.c where it belongs.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Thomas Gleixnerauthored and Ingo Molnarcommited 2008-01-30 13:30:19 +01:00
All kobjects require a dynamically allocated name now. We no longer
need to keep track if the name is statically assigned, we can just
unconditionally free() all kobject names on cleanup.
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kay Sieversauthored and Greg Kroah-Hartmancommited 2008-01-24 20:40:40 -08:00
Add missing IRQs and IRQ descriptions to /proc/interrupts.
/proc/interrupts is most useful when it displays every IRQ vector in use by
the system, not just those somebody thought would be interesting.
This patch inserts the following vector displays to the i386 and x86_64
platforms, as appropriate:
rescheduling interrupts
TLB flush interrupts
function call interrupts
thermal event interrupts
threshold interrupts
spurious interrupts
A threshold interrupt occurs when ECC memory correction is occuring at too
high a frequency. Thresholds are used by the ECC hardware as occasional
ECC failures are part of normal operation, but long sequences of ECC
failures usually indicate a memory chip that is about to fail.
Thermal event interrupts occur when a temperature threshold has been
exceeded for some CPU chip. IIRC, a thermal interrupt is also generated
when the temperature drops back to a normal level.
A spurious interrupt is an interrupt that was raised then lowered by the
device before it could be fully processed by the APIC. Hence the apic sees
the interrupt but does not know what device it came from. For this case
the APIC hardware will assume a vector of 0xff.
Rescheduling, call, and TLB flush interrupts are sent from one CPU to
another per the needs of the OS. Typically, their statistics would be used
to discover if an interrupt flood of the given type has been occuring.
AK: merged v2 and v4 which had some more tweaks
AK: replace Local interrupts with Local timer interrupts
AK: Fixed description of interrupt types.
[ tglx: arch/x86 adaptation ]
[ mingo: small cleanup ]
Signed-off-by: Joe Korty <joe.korty@ccur.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Tim Hockin <thockin@hockin.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Joe Kortyauthored and Thomas Gleixnercommited 2007-10-17 20:16:53 +02:00
Doh, I completely missed that devices marked DUMMY are not running
the set_mode function. So we force broadcasting, but we keep the
local APIC timer running.
Let the clock event layer mark the device _after_ switching it off.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Thomas Gleixnercommited 2007-10-17 20:15:13 +02:00
The 64bit SMP bootup is slightly different to the 32bit one. It enables
the boot CPU local APIC timer before all CPUs are brought up. Some AMD C1E
systems have the C1E feature flag only set in the secondary CPU. Due to
the early enable of the boot CPU local APIC timer the APIC timer is
registered as a fully functional device. When we detect the wreckage during
the bringup of the secondary CPU, we need to force the boot CPU into
broadcast mode.
Check the C1E caused APIC timer disable, when the secondary APIC timer is
initialized. If the boot CPU APIC timer was registered as a functional
clock event device, then fix this up and utilize the
CLOCK_EVT_NOTIFY_BROADCAST_FORCE mechanism to force the already
registered boot CPU APIC timer into broadcast mode.
Tested by force injecting the failure mode.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixnercommited 2007-10-14 22:57:45 +02:00
Make variables static.
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Chris Wrightauthored and Thomas Gleixnercommited 2007-10-12 23:04:23 +02:00
Remove the unused code after the switch to clock events.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Thomas Gleixnercommited 2007-10-12 23:04:23 +02:00
AMDs C1E enabled CPUs stop the local apic timer, when both cores are
idle. This is a hardware feature which breaks highres/dynticks.
Add the same quirk as we have for 32 bit already.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Thomas Gleixnercommited 2007-10-12 23:04:07 +02:00
Finally switch to the clockevents code. Share code with i386 for
hpet and PIT.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Thomas Gleixnercommited 2007-10-12 23:04:07 +02:00
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Thomas Gleixnercommited 2007-10-12 23:04:07 +02:00
setup_APIC_timer disables interrupts anyway. So no need to do the same
in setup_boot_APIC_clock and setup_secondary_APIC_clock. Disable
interrupts explicit in the calibration code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Thomas Gleixnercommited 2007-10-12 23:04:07 +02:00
setup_APIC_timer takes the file global calibration result as an argument.
Remove it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Thomas Gleixnercommited 2007-10-12 23:04:07 +02:00
APIC_DIVISOR is rather useless. It makes the calibration result more
accurate in the first place, but we discard this later when we write
the value to the APIC timer by dividing the calibration value by
APIC_DIVISOR.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Thomas Gleixnercommited 2007-10-12 23:04:06 +02:00
Chuck Ebbert
authored and
Thomas Gleixner
commited 
Akinobu Mita
authored and
Ingo Molnar
commited 
Alexey Starikovskiy
authored and
Jack Steiner
authored and
Glauber Costa
authored and
Ravikiran G Thirumalai
authored and
Yinghai Lu
authored and
travis@sgi.com
authored and
Andi Kleen
authored and
Hiroshi Shimamoto
authored and
Jan Beulich
authored and
Jeremy Fitzhardinge
authored and
Robert Richter
authored and
Kay Sievers
authored and
Greg Kroah-Hartman
commited 
Joe Korty
authored and
Thomas Gleixner
commited 
Chris Wright
authored and