joy/android_kernel_sony_sdm845
Watch
1
Fork
You've already forked android_kernel_sony_sdm845
 0
Code Issues Pull requests Projects Releases Wiki Activity

ImgTec Meta architecture changes for v3.9-rc1

Browse source 
This adds core architecture support for Imagination's Meta processor
 cores, followed by some later miscellaneous arch/metag cleanups and
 fixes which I kept separate to ease review:
 
  - Support for basic Meta 1 (ATP) and Meta 2 (HTP) core architecture
  - A few fixes all over, particularly for symbol prefixes
  - A few privilege protection fixes
  - Several cleanups (setup.c includes, split out a lot of metag_ksyms.c)
  - Fix some missing exports
  - Convert hugetlb to use vm_unmapped_area()
  - Copy device tree to non-init memory
  - Provide dma_get_sgtable()
 
 Signed-off-by: James Hogan <james.hogan@imgtec.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQIcBAABAgAGBQJRMmVXAAoJEKHZs+irPybfivgP/inEXqJyfw59omQdjwvYcU/a
 /u0MJ3UKSNS3U+HknfaFCy/Nwk1dqPLjqqyVC1V6AbUPBXlaEwGcimlNRx2uRjdq
 Uh96upMLHsNuF/xiiR477g3RwY0egIJdM1R1bGi3mZ3vVrNQGF+wbni6f61xCWGz
 M/4rDglpQvE79oLhYdgj6tidZtHQT0YWtERA9W90zkQWXGYmpFPKBKbfZAi5+rKQ
 U6Gpg26orUugzXNaxltJEYKE8gjLTppEabx8DARnItZ4zCMy4dw5RBJ35RFvQw6e
 eSmfgTy9w9WqBMY2+QMSgU0KQt1IITCzX7OlOXC0jALQJXoU0WWbOELlBVQLCwF1
 T0OcR/5ZP/hIlOk5Dh+e9U3AtbASXdMtqA0ZUe78woH1CBf7Nc/0c0vRg23EdMh8
 lnHDJxT/UqskoOYLI4kgWbEdLDy4uTh19U2pVi7VCo7ksLB9Bj9Xc8VSKgscSXTl
 OwzN+c4Jgtu8FDFTp+Af4AT8pYGJ08j8L2ErsV2sOv3Q44U5WXdrMz3GSgwXj8+4
 wZk3HvdkQVkMD5sJCUZgAswaN6BnbB0pHdCz4wMQ8jR/Ogs015Ipk64Ecym9S/4n
 uES7PnDtt/4lb5EyX2ScbvdnZTAFTaaP7OOhC77BOQvbQjIW1tkAcxWJqRry86uS
 iM0BFgK6Ohx3geqa5Ft0
 =65cR
 -----END PGP SIGNATURE-----

Merge tag 'metag-v3.9-rc1-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag

Pull new ImgTec Meta architecture from James Hogan:
 "This adds core architecture support for Imagination's Meta processor
  cores, followed by some later miscellaneous arch/metag cleanups and
  fixes which I kept separate to ease review:

   - Support for basic Meta 1 (ATP) and Meta 2 (HTP) core architecture
   - A few fixes all over, particularly for symbol prefixes
   - A few privilege protection fixes
   - Several cleanups (setup.c includes, split out a lot of
     metag_ksyms.c)
   - Fix some missing exports
   - Convert hugetlb to use vm_unmapped_area()
   - Copy device tree to non-init memory
   - Provide dma_get_sgtable()"

* tag 'metag-v3.9-rc1-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: (61 commits)
  metag: Provide dma_get_sgtable()
  metag: prom.h: remove declaration of metag_dt_memblock_reserve()
  metag: copy devicetree to non-init memory
  metag: cleanup metag_ksyms.c includes
  metag: move mm/init.c exports out of metag_ksyms.c
  metag: move usercopy.c exports out of metag_ksyms.c
  metag: move setup.c exports out of metag_ksyms.c
  metag: move kick.c exports out of metag_ksyms.c
  metag: move traps.c exports out of metag_ksyms.c
  metag: move irq enable out of irqflags.h on SMP
  genksyms: fix metag symbol prefix on crc symbols
  metag: hugetlb: convert to vm_unmapped_area()
  metag: export clear_page and copy_page
  metag: export metag_code_cache_flush_all
  metag: protect more non-MMU memory regions
  metag: make TXPRIVEXT bits explicit
  metag: kernel/setup.c: sort includes
  perf: Enable building perf tools for Meta
  metag: add boot time LNKGET/LNKSET check
  metag: add __init to metag_cache_probe()
  ...
This commit is contained in:
Linus Torvalds 2013-03-03 12:06:09 -08:00
commit 8fd5e7a2d9
200 changed files with 26934 additions and 8 deletions
Download patch file Download diff file Expand all files Collapse all files

2
Documentation/00-INDEX
View file

@ -299,6 +299,8 @@ memory-hotplug.txt
- Hotpluggable memory support, how to use and current status.
memory.txt
- info on typical Linux memory problems.
metag/
- directory with info about Linux on Meta architecture.
mips/
- directory with info about Linux on MIPS architecture.
misc-devices/

82
Documentation/devicetree/bindings/metag/meta-intc.txt Normal file
View file

@ -0,0 +1,82 @@
* Meta External Trigger Controller Binding
This binding specifies what properties must be available in the device tree
representation of a Meta external trigger controller.
Required properties:
- compatible: Specifies the compatibility list for the interrupt controller.
The type shall be <string> and the value shall include "img,meta-intc".
- num-banks: Specifies the number of interrupt banks (each of which can
handle 32 interrupt sources).
- interrupt-controller: The presence of this property identifies the node
as an interupt controller. No property value shall be defined.
- #interrupt-cells: Specifies the number of cells needed to encode an
interrupt source. The type shall be a <u32> and the value shall be 2.
- #address-cells: Specifies the number of cells needed to encode an
address. The type shall be <u32> and the value shall be 0. As such,
'interrupt-map' nodes do not have to specify a parent unit address.
Optional properties:
- no-mask: The controller doesn't have any mask registers.
* Interrupt Specifier Definition
Interrupt specifiers consists of 2 cells encoded as follows:
- <1st-cell>: The interrupt-number that identifies the interrupt source.
- <2nd-cell>: The Linux interrupt flags containing level-sense information,
encoded as follows:
1 = edge triggered
4 = level-sensitive
* Examples
Example 1:
/*
* Meta external trigger block
*/
intc: intc {
// This is an interrupt controller node.
interrupt-controller;
// No address cells so that 'interrupt-map' nodes which
// reference this interrupt controller node do not need a parent
// address specifier.
#address-cells = <0>;
// Two cells to encode interrupt sources.
#interrupt-cells = <2>;
// Number of interrupt banks
num-banks = <2>;
// No HWMASKEXT is available (specify on Chorus2 and Comet ES1)
no-mask;
// Compatible with Meta hardware trigger block.
compatible = "img,meta-intc";
};
Example 2:
/*
* An interrupt generating device that is wired to a Meta external
* trigger block.
*/
uart1: uart@0x02004c00 {
// Interrupt source '5' that is level-sensitive.
// Note that there are only two cells as specified in the
// interrupt parent's '#interrupt-cells' property.
interrupts = <5 4 /* level */>;
// The interrupt controller that this device is wired to.
interrupt-parent = <&intc>;
};

4
Documentation/kernel-parameters.txt
View file

@ -978,6 +978,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
If specified, z/VM IUCV HVC accepts connections
from listed z/VM user IDs only.
hwthread_map= [METAG] Comma-separated list of Linux cpu id to
hardware thread id mappings.
Format: <cpu>:<hwthread>
keep_bootcon [KNL]
Do not unregister boot console at start. This is only
useful for debugging when something happens in the window

4
Documentation/metag/00-INDEX Normal file
View file

@ -0,0 +1,4 @@
00-INDEX
- this file
kernel-ABI.txt
- Documents metag ABI details

256
Documentation/metag/kernel-ABI.txt Normal file
View file

@ -0,0 +1,256 @@
==========================
KERNEL ABIS FOR METAG ARCH
==========================
This document describes the Linux ABIs for the metag architecture, and has the
following sections:
(*) Outline of registers
(*) Userland registers
(*) Kernel registers
(*) System call ABI
(*) Calling conventions
====================
OUTLINE OF REGISTERS
====================
The main Meta core registers are arranged in units:
UNIT Type DESCRIPTION GP EXT PRIV GLOBAL
======= ======= =============== ======= ======= ======= =======
CT Special Control unit
D0 General Data unit 0 0-7 8-15 16-31 16-31
D1 General Data unit 1 0-7 8-15 16-31 16-31
A0 General Address unit 0 0-3 4-7 8-15 8-15
A1 General Address unit 1 0-3 4-7 8-15 8-15
PC Special PC unit 0 1
PORT Special Ports
TR Special Trigger unit 0-7
TT Special Trace unit 0-5
FX General FP unit 0-15
GP registers form part of the main context.
Extended context registers (EXT) may not be present on all hardware threads and
can be context switched if support is enabled and the appropriate bits are set
in e.g. the D0.8 register to indicate what extended state to preserve.
Global registers are shared between threads and are privilege protected.
See arch/metag/include/asm/metag_regs.h for definitions relating to core
registers and the fields and bits they contain. See the TRMs for further details
about special registers.
Several special registers are preserved in the main context, these are the
interesting ones:
REG (ALIAS) PURPOSE
======================= ===============================================
CT.1 (TXMODE) Processor mode bits (particularly for DSP)
CT.2 (TXSTATUS) Condition flags and LSM_STEP (MGET/MSET step)
CT.3 (TXRPT) Branch repeat counter
PC.0 (PC) Program counter
Some of the general registers have special purposes in the ABI and therefore
have aliases:
D0 REG (ALIAS) PURPOSE D1 REG (ALIAS) PURPOSE
=============== =============== =============== =======================
D0.0 (D0Re0) 32bit result D1.0 (D1Re0) Top half of 64bit result
D0.1 (D0Ar6) Argument 6 D1.1 (D1Ar5) Argument 5
D0.2 (D0Ar4) Argument 4 D1.2 (D1Ar3) Argument 3
D0.3 (D0Ar2) Argument 2 D1.3 (D1Ar1) Argument 1
D0.4 (D0FrT) Frame temp D1.4 (D1RtP) Return pointer
D0.5 Call preserved D1.5 Call preserved
D0.6 Call preserved D1.6 Call preserved
D0.7 Call preserved D1.7 Call preserved
A0 REG (ALIAS) PURPOSE A1 REG (ALIAS) PURPOSE
=============== =============== =============== =======================
A0.0 (A0StP) Stack pointer A1.0 (A1GbP) Global base pointer
A0.1 (A0FrP) Frame pointer A1.1 (A1LbP) Local base pointer
A0.2 A1.2
A0.3 A1.3
==================
USERLAND REGISTERS
==================
All the general purpose D0, D1, A0, A1 registers are preserved when entering the
kernel (including asynchronous events such as interrupts and timer ticks) except
the following which have special purposes in the ABI:
REGISTERS WHEN STATUS PURPOSE
=============== ======= =============== ===============================
D0.8 DSP Preserved ECH, determines what extended
DSP state to preserve.
A0.0 (A0StP) ALWAYS Preserved Stack >= A0StP may be clobbered
at any time by the creation of a
signal frame.
A1.0 (A1GbP) SMP Clobbered Used as temporary for loading
kernel stack pointer and saving
core context.
A0.15 !SMP Protected Stores kernel stack pointer.
A1.15 ALWAYS Protected Stores kernel base pointer.
On UP A0.15 is used to store the kernel stack pointer for storing the userland
context. A0.15 is global between hardware threads though which means it cannot
be used on SMP for this purpose. Since no protected local registers are
available A1GbP is reserved for use as a temporary to allow a percpu stack
pointer to be loaded for storing the rest of the context.
================
KERNEL REGISTERS
================
When in the kernel the following registers have special purposes in the ABI:
REGISTERS WHEN STATUS PURPOSE
=============== ======= =============== ===============================
A0.0 (A0StP) ALWAYS Preserved Stack >= A0StP may be clobbered
at any time by the creation of
an irq signal frame.
A1.0 (A1GbP) ALWAYS Preserved Reserved (kernel base pointer).
===============
SYSTEM CALL ABI
===============
When a system call is made, the following registers are effective:
REGISTERS CALL RETURN
=============== ======================= ===============================
D0.0 (D0Re0) Return value (or -errno)
D1.0 (D1Re0) System call number Clobbered
D0.1 (D0Ar6) Syscall arg #6 Preserved
D1.1 (D1Ar5) Syscall arg #5 Preserved
D0.2 (D0Ar4) Syscall arg #4 Preserved
D1.2 (D1Ar3) Syscall arg #3 Preserved
D0.3 (D0Ar2) Syscall arg #2 Preserved
D1.3 (D1Ar1) Syscall arg #1 Preserved
Due to the limited number of argument registers and some system calls with badly
aligned 64-bit arguments, 64-bit values are always packed in consecutive
arguments, even if this is contrary to the normal calling conventions (where the
two halves would go in a matching pair of data registers).
For example fadvise64_64 usually has the signature:
long sys_fadvise64_64(i32 fd, i64 offs, i64 len, i32 advice);
But for metag fadvise64_64 is wrapped so that the 64-bit arguments are packed:
long sys_fadvise64_64_metag(i32 fd, i32 offs_lo,
i32 offs_hi, i32 len_lo,
i32 len_hi, i32 advice)
So the arguments are packed in the registers like this:
D0 REG (ALIAS) VALUE D1 REG (ALIAS) VALUE
=============== =============== =============== =======================
D0.1 (D0Ar6) advice D1.1 (D1Ar5) hi(len)
D0.2 (D0Ar4) lo(len) D1.2 (D1Ar3) hi(offs)
D0.3 (D0Ar2) lo(offs) D1.3 (D1Ar1) fd
===================
CALLING CONVENTIONS
===================
These calling conventions apply to both user and kernel code. The stack grows
from low addresses to high addresses in the metag ABI. The stack pointer (A0StP)
should always point to the next free address on the stack and should at all
times be 64-bit aligned. The following registers are effective at the point of a
call:
REGISTERS CALL RETURN
=============== ======================= ===============================
D0.0 (D0Re0) 32bit return value
D1.0 (D1Re0) Upper half of 64bit return value
D0.1 (D0Ar6) 32bit argument #6 Clobbered
D1.1 (D1Ar5) 32bit argument #5 Clobbered
D0.2 (D0Ar4) 32bit argument #4 Clobbered
D1.2 (D1Ar3) 32bit argument #3 Clobbered
D0.3 (D0Ar2) 32bit argument #2 Clobbered
D1.3 (D1Ar1) 32bit argument #1 Clobbered
D0.4 (D0FrT) Clobbered
D1.4 (D1RtP) Return pointer Clobbered
D{0-1}.{5-7} Preserved
A0.0 (A0StP) Stack pointer Preserved
A1.0 (A0GbP) Preserved
A0.1 (A0FrP) Frame pointer Preserved
A1.1 (A0LbP) Preserved
A{0-1},{2-3} Clobbered
64-bit arguments are placed in matching pairs of registers (i.e. the same
register number in both D0 and D1 units), with the least significant half in D0
and the most significant half in D1, leaving a gap where necessary. Futher
arguments are stored on the stack in reverse order (earlier arguments at higher
addresses):
ADDRESS 0 1 2 3 4 5 6 7
=============== ===== ===== ===== ===== ===== ===== ===== =====
A0StP -->
A0StP-0x08 32bit argument #8 32bit argument #7
A0StP-0x10 32bit argument #10 32bit argument #9
Function prologues tend to look a bit like this:
/* If frame pointer in use, move it to frame temp register so it can be
easily pushed onto stack */
MOV D0FrT,A0FrP
/* If frame pointer in use, set it to stack pointer */
ADD A0FrP,A0StP,#0
/* Preserve D0FrT, D1RtP, D{0-1}.{5-7} on stack, incrementing A0StP */
MSETL [A0StP++],D0FrT,D0.5,D0.6,D0.7
/* Allocate some stack space for local variables */
ADD A0StP,A0StP,#0x10
At this point the stack would look like this:
ADDRESS 0 1 2 3 4 5 6 7
=============== ===== ===== ===== ===== ===== ===== ===== =====
A0StP -->
A0StP-0x08
A0StP-0x10
A0StP-0x18 Old D0.7 Old D1.7
A0StP-0x20 Old D0.6 Old D1.6
A0StP-0x28 Old D0.5 Old D1.5
A0FrP --> Old A0FrP (frame ptr) Old D1RtP (return ptr)
A0FrP-0x08 32bit argument #8 32bit argument #7
A0FrP-0x10 32bit argument #10 32bit argument #9
Function epilogues tend to differ depending on the use of a frame pointer. An
example of a frame pointer epilogue:
/* Restore D0FrT, D1RtP, D{0-1}.{5-7} from stack, incrementing A0FrP */
MGETL D0FrT,D0.5,D0.6,D0.7,[A0FrP++]
/* Restore stack pointer to where frame pointer was before increment */
SUB A0StP,A0FrP,#0x20
/* Restore frame pointer from frame temp */
MOV A0FrP,D0FrT
/* Return to caller via restored return pointer */
MOV PC,D1RtP
If the function hasn't touched the frame pointer, MGETL cannot be safely used
with A0StP as it always increments and that would expose the stack to clobbering
by interrupts (kernel) or signals (user). Therefore it's common to see the MGETL
split into separate GETL instructions:
/* Restore D0FrT, D1RtP, D{0-1}.{5-7} from stack */
GETL D0FrT,D1RtP,[A0StP+#-0x30]
GETL D0.5,D1.5,[A0StP+#-0x28]
GETL D0.6,D1.6,[A0StP+#-0x20]
GETL D0.7,D1.7,[A0StP+#-0x18]
/* Restore stack pointer */
SUB A0StP,A0StP,#0x30
/* Return to caller via restored return pointer */
MOV PC,D1RtP

12
MAINTAINERS
View file

@ -5204,6 +5204,18 @@ F: drivers/mtd/
F: include/linux/mtd/
F: include/uapi/mtd/
METAG ARCHITECTURE
M: James Hogan <james.hogan@imgtec.com>
S: Supported
F: arch/metag/
F: Documentation/metag/
F: Documentation/devicetree/bindings/metag/
F: drivers/clocksource/metag_generic.c
F: drivers/irqchip/irq-metag.c
F: drivers/irqchip/irq-metag-ext.c
F: drivers/tty/metag_da.c
F: fs/imgdafs/
MICROBLAZE ARCHITECTURE
M: Michal Simek <monstr@monstr.eu>
L: microblaze-uclinux@itee.uq.edu.au (moderated for non-subscribers)

16
arch/Kconfig
View file

@ -103,6 +103,22 @@ config UPROBES
If in doubt, say "N".
config HAVE_64BIT_ALIGNED_ACCESS
def_bool 64BIT && !HAVE_EFFICIENT_UNALIGNED_ACCESS
help
Some architectures require 64 bit accesses to be 64 bit
aligned, which also requires structs containing 64 bit values
to be 64 bit aligned too. This includes some 32 bit
architectures which can do 64 bit accesses, as well as 64 bit
architectures without unaligned access.
This symbol should be selected by an architecture if 64 bit
accesses are required to be 64 bit aligned in this way even
though it is not a 64 bit architecture.
See Documentation/unaligned-memory-access.txt for more
information on the topic of unaligned memory accesses.
config HAVE_EFFICIENT_UNALIGNED_ACCESS
bool
help

290
arch/metag/Kconfig Normal file
View file

@ -0,0 +1,290 @@
config SYMBOL_PREFIX
string
default "_"
config METAG
def_bool y
select EMBEDDED
select GENERIC_ATOMIC64
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_SHOW
select GENERIC_SMP_IDLE_THREAD
select HAVE_64BIT_ALIGNED_ACCESS
select HAVE_ARCH_TRACEHOOK
select HAVE_C_RECORDMCOUNT
select HAVE_DEBUG_KMEMLEAK
select HAVE_DYNAMIC_FTRACE
select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_FUNCTION_TRACER
select HAVE_FUNCTION_TRACE_MCOUNT_TEST
select HAVE_GENERIC_HARDIRQS
select HAVE_KERNEL_BZIP2
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_LZO
select HAVE_KERNEL_XZ
select HAVE_MEMBLOCK
select HAVE_MEMBLOCK_NODE_MAP
select HAVE_MOD_ARCH_SPECIFIC
select HAVE_PERF_EVENTS
select HAVE_SYSCALL_TRACEPOINTS
select IRQ_DOMAIN
select MODULES_USE_ELF_RELA
select OF
select OF_EARLY_FLATTREE
select SPARSE_IRQ
config STACKTRACE_SUPPORT
def_bool y
config LOCKDEP_SUPPORT
def_bool y
config HAVE_LATENCYTOP_SUPPORT
def_bool y
config RWSEM_GENERIC_SPINLOCK
def_bool y
config RWSEM_XCHGADD_ALGORITHM
bool
config GENERIC_HWEIGHT
def_bool y
config GENERIC_CALIBRATE_DELAY
def_bool y
config GENERIC_GPIO
def_bool n
config NO_IOPORT
def_bool y
source "init/Kconfig"
source "kernel/Kconfig.freezer"
menu "Processor type and features"
config MMU
def_bool y
config STACK_GROWSUP
def_bool y
config HOTPLUG_CPU
bool "Enable CPU hotplug support"
depends on SMP
help
Say Y here to allow turning CPUs off and on. CPUs can be
controlled through /sys/devices/system/cpu.
Say N if you want to disable CPU hotplug.
config HIGHMEM
bool "High Memory Support"
help
The address space of Meta processors is only 4 Gigabytes large
and it has to accommodate user address space, kernel address
space as well as some memory mapped IO. That means that, if you
have a large amount of physical memory and/or IO, not all of the
memory can be "permanently mapped" by the kernel. The physical
memory that is not permanently mapped is called "high memory".
Depending on the selected kernel/user memory split, minimum
vmalloc space and actual amount of RAM, you may not need this
option which should result in a slightly faster kernel.
If unsure, say n.
source "arch/metag/mm/Kconfig"
source "arch/metag/Kconfig.soc"
config METAG_META12
bool
help
Select this from the SoC config symbol to indicate that it contains a
Meta 1.2 core.
config METAG_META21
bool
help
Select this from the SoC config symbol to indicate that it contains a
Meta 2.1 core.
config SMP
bool "Symmetric multi-processing support"
depends on METAG_META21 && METAG_META21_MMU
select USE_GENERIC_SMP_HELPERS
help
This enables support for systems with more than one thread running
Linux. If you have a system with only one thread running Linux,
say N. Otherwise, say Y.
config NR_CPUS
int "Maximum number of CPUs (2-4)" if SMP
range 2 4 if SMP
default "1" if !SMP
default "4" if SMP
config METAG_SMP_WRITE_REORDERING
bool
help
This attempts to prevent cache-memory incoherence due to external
reordering of writes from different hardware threads when SMP is
enabled. It adds fences (system event 0) to smp_mb and smp_rmb in an
attempt to catch some of the cases, and also before writes to shared
memory in LOCK1 protected atomics and spinlocks.
This will not completely prevent cache incoherency on affected cores.
config METAG_LNKGET_AROUND_CACHE
bool
depends on METAG_META21
help
This indicates that the LNKGET/LNKSET instructions go around the
cache, which requires some extra cache flushes when the memory needs
to be accessed by normal GET/SET instructions too.
choice
prompt "Atomicity primitive"
default METAG_ATOMICITY_LNKGET
help
This option selects the mechanism for performing atomic operations.
config METAG_ATOMICITY_IRQSOFF
depends on !SMP
bool "irqsoff"
help
This option disables interrupts to achieve atomicity. This mechanism
is not SMP-safe.
config METAG_ATOMICITY_LNKGET
depends on METAG_META21
bool "lnkget/lnkset"
help
This option uses the LNKGET and LNKSET instructions to achieve
atomicity. LNKGET/LNKSET are load-link/store-conditional instructions.
Choose this option if your system requires low latency.
config METAG_ATOMICITY_LOCK1
depends on SMP
bool "lock1"
help
This option uses the LOCK1 instruction for atomicity. This is mainly
provided as a debugging aid if the lnkget/lnkset atomicity primitive
isn't working properly.
endchoice
config METAG_FPU
bool "FPU Support"
depends on METAG_META21
default y
help
This option allows processes to use FPU hardware available with this
CPU. If this option is not enabled FPU registers will not be saved
and restored on context-switch.
If you plan on running programs which are compiled to use hard floats
say Y here.
config METAG_DSP
bool "DSP Support"
help
This option allows processes to use DSP hardware available
with this CPU. If this option is not enabled DSP registers
will not be saved and restored on context-switch.
If you plan on running DSP programs say Y here.
config METAG_PERFCOUNTER_IRQS
bool "PerfCounters interrupt support"
depends on METAG_META21
help
This option enables using interrupts to collect information from
Performance Counters. This option is supported in new META21
(starting from HTP265).
When disabled, Performance Counters information will be collected
based on Timer Interrupt.
config METAG_DA
bool "DA support"
help
Say Y if you plan to use a DA debug adapter with Linux. The presence
of the DA will be detected automatically at boot, so it is safe to say
Y to this option even when booting without a DA.
This enables support for services provided by DA JTAG debug adapters,
such as:
- communication over DA channels (such as the console driver).
- use of the DA filesystem.
menu "Boot options"
config METAG_BUILTIN_DTB
bool "Embed DTB in kernel image"
default y
help
Embeds a device tree binary in the kernel image.
config METAG_BUILTIN_DTB_NAME
string "Built in DTB"
depends on METAG_BUILTIN_DTB
help
Set the name of the DTB to embed (leave blank to pick one
automatically based on kernel configuration).
config CMDLINE_BOOL
bool "Default bootloader kernel arguments"
config CMDLINE
string "Kernel command line"
depends on CMDLINE_BOOL
help
On some architectures there is currently no way for the boot loader
to pass arguments to the kernel. For these architectures, you should
supply some command-line options at build time by entering them
here.
config CMDLINE_FORCE
bool "Force default kernel command string"
depends on CMDLINE_BOOL
help
Set this to have arguments from the default kernel command string
override those passed by the boot loader.
endmenu
source "kernel/Kconfig.preempt"
source kernel/Kconfig.hz
endmenu
menu "Power management options"
source kernel/power/Kconfig
endmenu
menu "Executable file formats"
source "fs/Kconfig.binfmt"
endmenu
source "net/Kconfig"
source "drivers/Kconfig"
source "fs/Kconfig"
source "arch/metag/Kconfig.debug"
source "security/Kconfig"
source "crypto/Kconfig"
source "lib/Kconfig"

40
arch/metag/Kconfig.debug Normal file
View file

@ -0,0 +1,40 @@
menu "Kernel hacking"
config TRACE_IRQFLAGS_SUPPORT
bool
default y
source "lib/Kconfig.debug"
config DEBUG_STACKOVERFLOW
bool "Check for stack overflows"
depends on DEBUG_KERNEL
help
This option will cause messages to be printed if free stack space
drops below a certain limit.
config 4KSTACKS
bool "Use 4Kb for kernel stacks instead of 8Kb"
depends on DEBUG_KERNEL
help
If you say Y here the kernel will use a 4Kb stacksize for the
kernel stack attached to each process/thread. This facilitates
running more threads on a system and also reduces the pressure
on the VM subsystem for higher order allocations. This option
will also use IRQ stacks to compensate for the reduced stackspace.
config METAG_FUNCTION_TRACE
bool "Output Meta real-time trace data for function entry/exit"
help
If you say Y here the kernel will use the Meta hardware trace
unit to output information about function entry and exit that
can be used by a debugger for profiling and call-graphs.
config METAG_POISON_CATCH_BUFFERS
bool "Poison catch buffer contents on kernel entry"
help
If you say Y here the kernel will write poison data to the
catch buffer registers on kernel entry. This will make any
problem with catch buffer handling much more apparent.
endmenu

55
arch/metag/Kconfig.soc Normal file
View file

@ -0,0 +1,55 @@
choice
prompt "SoC Type"
default META21_FPGA
config META12_FPGA
bool "Meta 1.2 FPGA"
select METAG_META12
help
This is a Meta 1.2 FPGA bitstream, just a bare CPU.
config META21_FPGA
bool "Meta 2.1 FPGA"
select METAG_META21
help
This is a Meta 2.1 FPGA bitstream, just a bare CPU.
endchoice
menu "SoC configuration"
if METAG_META21
# Meta 2.x specific options
config METAG_META21_MMU
bool "Meta 2.x MMU mode"
default y
help
Use the Meta 2.x MMU in extended mode.
config METAG_UNALIGNED
bool "Meta 2.x unaligned access checking"
default y
help
All memory accesses will be checked for alignment and an exception
raised on unaligned accesses. This feature does cost performance
but without it there will be no notification of this type of error.
config METAG_USER_TCM
bool "Meta on-chip memory support for userland"
select GENERIC_ALLOCATOR
default y
help
Allow the on-chip memories of Meta SoCs to be used by user
applications.
endif
config METAG_HALT_ON_PANIC
bool "Halt the core on panic"
help
Halt the core when a panic occurs. This is useful when running
pre-production silicon or in an FPGA environment.
endmenu

87
arch/metag/Makefile Normal file
View file

@ -0,0 +1,87 @@
#
# metag/Makefile
#
# This file is included by the global makefile so that you can add your own
# architecture-specific flags and dependencies. Remember to do have actions
# for "archclean" cleaning up for this architecture.
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
# Copyright (C) 1994 by Linus Torvalds
# 2007,2008,2012 by Imagination Technologies Ltd.
#
LDFLAGS :=
OBJCOPYFLAGS := -O binary -R .note -R .comment -S
checkflags-$(CONFIG_METAG_META12) += -DMETAC_1_2
checkflags-$(CONFIG_METAG_META21) += -DMETAC_2_1
CHECKFLAGS += -D__metag__ $(checkflags-y)
KBUILD_DEFCONFIG := meta2_defconfig
sflags-$(CONFIG_METAG_META12) += -mmetac=1.2
ifeq ($(CONFIG_METAG_META12),y)
# Only use TBI API 1.4 if DSP is enabled for META12 cores
sflags-$(CONFIG_METAG_DSP) += -DTBI_1_4
endif
sflags-$(CONFIG_METAG_META21) += -mmetac=2.1 -DTBI_1_4
cflags-$(CONFIG_METAG_FUNCTION_TRACE) += -mhwtrace-leaf -mhwtrace-retpc
cflags-$(CONFIG_METAG_META21) += -mextensions=bex
KBUILD_CFLAGS += -pipe
KBUILD_CFLAGS += -ffunction-sections
KBUILD_CFLAGS += $(sflags-y) $(cflags-y)
KBUILD_AFLAGS += $(sflags-y)
LDFLAGS_vmlinux := $(ldflags-y)
head-y := arch/metag/kernel/head.o
core-y += arch/metag/boot/dts/
core-y += arch/metag/kernel/
core-y += arch/metag/mm/
libs-y += arch/metag/lib/
libs-y += arch/metag/tbx/
boot := arch/metag/boot
boot_targets += uImage
boot_targets += uImage.gz
boot_targets += uImage.bz2
boot_targets += uImage.xz
boot_targets += uImage.lzo
boot_targets += uImage.bin
boot_targets += vmlinux.bin
PHONY += $(boot_targets)
all: vmlinux.bin
$(boot_targets): vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
%.dtb %.dtb.S %.dtb.o: scripts
$(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@
dtbs: scripts
$(Q)$(MAKE) $(build)=$(boot)/dts dtbs
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
define archhelp
echo '* vmlinux.bin - Binary kernel image (arch/$(ARCH)/boot/vmlinux.bin)'
@echo ' uImage - Alias to bootable U-Boot image'
@echo ' uImage.bin - Kernel-only image for U-Boot (bin)'
@echo ' uImage.gz - Kernel-only image for U-Boot (gzip)'
@echo ' uImage.bz2 - Kernel-only image for U-Boot (bzip2)'
@echo ' uImage.xz - Kernel-only image for U-Boot (xz)'
@echo ' uImage.lzo - Kernel-only image for U-Boot (lzo)'
@echo ' dtbs - Build device tree blobs for enabled boards'
endef

4
arch/metag/boot/.gitignore vendored Normal file
View file

@ -0,0 +1,4 @@
vmlinux*
uImage*
ramdisk.*
*.dtb

68
arch/metag/boot/Makefile Normal file
View file

@ -0,0 +1,68 @@
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
# Copyright (C) 2007,2012 Imagination Technologies Ltd.
#
suffix-y := bin
suffix-$(CONFIG_KERNEL_GZIP) := gz
suffix-$(CONFIG_KERNEL_BZIP2) := bz2
suffix-$(CONFIG_KERNEL_XZ) := xz
suffix-$(CONFIG_KERNEL_LZO) := lzo
targets += vmlinux.bin
targets += uImage
targets += uImage.gz
targets += uImage.bz2
targets += uImage.xz
targets += uImage.lzo
targets += uImage.bin
extra-y += vmlinux.bin
extra-y += vmlinux.bin.gz
extra-y += vmlinux.bin.bz2
extra-y += vmlinux.bin.xz
extra-y += vmlinux.bin.lzo
UIMAGE_LOADADDR = $(CONFIG_PAGE_OFFSET)
ifeq ($(CONFIG_FUNCTION_TRACER),y)
orig_cflags := $(KBUILD_CFLAGS)
KBUILD_CFLAGS = $(subst -pg, , $(orig_cflags))
endif
$(obj)/vmlinux.bin: vmlinux FORCE
$(call if_changed,objcopy)
$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
$(call if_changed,gzip)
$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
$(call if_changed,bzip2)
$(obj)/vmlinux.bin.xz: $(obj)/vmlinux.bin FORCE
$(call if_changed,xzkern)
$(obj)/vmlinux.bin.lzo: $(obj)/vmlinux.bin FORCE
$(call if_changed,lzo)
$(obj)/uImage.gz: $(obj)/vmlinux.bin.gz FORCE
$(call if_changed,uimage,gzip)
$(obj)/uImage.bz2: $(obj)/vmlinux.bin.bz2 FORCE
$(call if_changed,uimage,bzip2)
$(obj)/uImage.xz: $(obj)/vmlinux.bin.xz FORCE
$(call if_changed,uimage,xz)
$(obj)/uImage.lzo: $(obj)/vmlinux.bin.lzo FORCE
$(call if_changed,uimage,lzo)
$(obj)/uImage.bin: $(obj)/vmlinux.bin FORCE
$(call if_changed,uimage,none)
$(obj)/uImage: $(obj)/uImage.$(suffix-y)
@ln -sf $(notdir $<) $@
@echo ' Image $@ is ready'

16
arch/metag/boot/dts/Makefile Normal file
View file

@ -0,0 +1,16 @@
dtb-y += skeleton.dtb
# Built-in dtb
builtindtb-y := skeleton
ifneq ($(CONFIG_METAG_BUILTIN_DTB_NAME),"")
builtindtb-y := $(CONFIG_METAG_BUILTIN_DTB_NAME)
endif
obj-$(CONFIG_METAG_BUILTIN_DTB) += $(patsubst "%",%,$(builtindtb-y)).dtb.o
targets += dtbs
targets += $(dtb-y)
dtbs: $(addprefix $(obj)/, $(dtb-y))
clean-files += *.dtb

10
arch/metag/boot/dts/skeleton.dts Normal file
View file

@ -0,0 +1,10 @@
/*
* Copyright (C) 2012 Imagination Technologies Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
/include/ "skeleton.dtsi"

14
arch/metag/boot/dts/skeleton.dtsi Normal file
View file

@ -0,0 +1,14 @@
/*
* Skeleton device tree; the bare minimum needed to boot; just include and
* add a compatible value. The bootloader will typically populate the memory
* node.
*/
/ {
compatible = "img,meta";
#address-cells = <1>;
#size-cells = <1>;
chosen { };
aliases { };
memory { device_type = "memory"; reg = <0 0>; };
};

40
arch/metag/configs/meta1_defconfig Normal file
View file

@ -0,0 +1,40 @@
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_LOG_BUF_SHIFT=13
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_ELF_CORE is not set
CONFIG_SLAB=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
# CONFIG_MSDOS_PARTITION is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_FLATMEM_MANUAL=y
CONFIG_META12_FPGA=y
CONFIG_METAG_DA=y
CONFIG_HZ_100=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=1
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_DA_TTY=y
CONFIG_DA_CONSOLE=y
# CONFIG_DEVKMEM is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_DNOTIFY is not set
CONFIG_TMPFS=y
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_SCHED_DEBUG is not set
CONFIG_DEBUG_INFO=y

41
arch/metag/configs/meta2_defconfig Normal file
View file

@ -0,0 +1,41 @@
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=13
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_ELF_CORE is not set
CONFIG_SLAB=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
# CONFIG_MSDOS_PARTITION is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_METAG_L2C=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_METAG_HALT_ON_PANIC=y
CONFIG_METAG_DA=y
CONFIG_HZ_100=y
CONFIG_DEVTMPFS=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=1
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_DA_TTY=y
CONFIG_DA_CONSOLE=y
# CONFIG_DEVKMEM is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_DNOTIFY is not set
CONFIG_TMPFS=y
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_SCHED_DEBUG is not set
CONFIG_DEBUG_INFO=y

42
arch/metag/configs/meta2_smp_defconfig Normal file
View file

@ -0,0 +1,42 @@
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=13
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_ELF_CORE is not set
CONFIG_SLAB=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
# CONFIG_MSDOS_PARTITION is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_METAG_L2C=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_METAG_HALT_ON_PANIC=y
CONFIG_SMP=y
CONFIG_METAG_DA=y
CONFIG_HZ_100=y
CONFIG_DEVTMPFS=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=1
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_DA_TTY=y
CONFIG_DA_CONSOLE=y
# CONFIG_DEVKMEM is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_DNOTIFY is not set
CONFIG_TMPFS=y
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_SCHED_DEBUG is not set
CONFIG_DEBUG_INFO=y

54
arch/metag/include/asm/Kbuild Normal file
View file

@ -0,0 +1,54 @@
generic-y += auxvec.h
generic-y += bitsperlong.h
generic-y += bugs.h
generic-y += clkdev.h
generic-y += cputime.h
generic-y += current.h
generic-y += device.h
generic-y += dma.h
generic-y += emergency-restart.h
generic-y += errno.h
generic-y += exec.h
generic-y += fb.h
generic-y += fcntl.h
generic-y += futex.h
generic-y += hardirq.h
generic-y += hw_irq.h
generic-y += ioctl.h
generic-y += ioctls.h
generic-y += ipcbuf.h
generic-y += irq_regs.h
generic-y += kdebug.h
generic-y += kmap_types.h
generic-y += kvm_para.h
generic-y += local.h
generic-y += local64.h
generic-y += msgbuf.h
generic-y += mutex.h
generic-y += param.h
generic-y += pci.h
generic-y += percpu.h
generic-y += poll.h
generic-y += posix_types.h
generic-y += scatterlist.h
generic-y += sections.h
generic-y += sembuf.h
generic-y += serial.h
generic-y += shmbuf.h
generic-y += shmparam.h
generic-y += signal.h
generic-y += socket.h
generic-y += sockios.h
generic-y += stat.h
generic-y += statfs.h
generic-y += switch_to.h
generic-y += termbits.h
generic-y += termios.h
generic-y += timex.h
generic-y += trace_clock.h
generic-y += types.h
generic-y += ucontext.h
generic-y += unaligned.h
generic-y += user.h
generic-y += vga.h
generic-y += xor.h

Some files were not shown because too many files have changed in this diff Show more