Merge android-4.9.211(5af9b7f) into msm-4.9

* refs/heads/tmp-5af9b7f:
  Linux 4.9.211
  regulator: ab8500: Remove SYSCLKREQ from enum ab8505_regulator_id
  perf probe: Fix wrong address verification
  scsi: core: scsi_trace: Use get_unaligned_be*()
  scsi: target: core: Fix a pr_debug() argument
  scsi: bnx2i: fix potential use after free
  scsi: qla4xxx: fix double free bug
  scsi: esas2r: unlock on error in esas2r_nvram_read_direct()
  reiserfs: fix handling of -EOPNOTSUPP in reiserfs_for_each_xattr
  cfg80211: check for set_wiphy_params
  cw1200: Fix a signedness bug in cw1200_load_firmware()
  xen/blkfront: Adjust indentation in xlvbd_alloc_gendisk
  net: usb: lan78xx: limit size of local TSO packets
  tcp: fix marked lost packets not being retransmitted
  r8152: add missing endpoint sanity check
  net/wan/fsl_ucc_hdlc: fix out of bounds write on array utdm_info
  net: dsa: tag_qca: fix doubled Tx statistics
  macvlan: use skb_reset_mac_header() in macvlan_queue_xmit()
  batman-adv: Fix DAT candidate selection on little endian systems
  netfilter: arp_tables: init netns pointer in xt_tgdtor_param struct
  netfilter: fix a use-after-free in mtype_destroy()
  cfg80211: fix page refcount issue in A-MSDU decap
  arm64: dts: agilex/stratix10: fix pmu interrupt numbers
  scsi: fnic: fix invalid stack access
  scsi: fnic: use kernel's '%pM' format option to print MAC
  USB: serial: keyspan: handle unbound ports
  USB: serial: io_edgeport: handle unbound ports on URB completion
  USB: serial: io_edgeport: use irqsave() in USB's complete callback
  net: stmmac: Enable 16KB buffer size
  net: stmmac: 16KB buffer must be 16 byte aligned
  mm/page-writeback.c: avoid potential division by zero in wb_min_max_ratio()
  perf report: Fix incorrectly added dimensions as switch perf data file
  perf hists: Fix variable name's inconsistency in hists__for_each() macro
  x86/efistub: Disable paging at mixed mode entry
  usb: core: hub: Improved device recognition on remote wakeup
  scsi: mptfusion: Fix double fetch bug in ioctl
  USB: serial: quatech2: handle unbound ports
  USB: serial: io_edgeport: add missing active-port sanity check
  USB: serial: ch341: handle unbound port at reset_resume
  USB: serial: suppress driver bind attributes
  USB: serial: opticon: fix control-message timeouts
  USB: serial: simple: Add Motorola Solutions TETRA MTP3xxx and MTP85xx
  iio: buffer: align the size of scan bytes to size of the largest element
  block: fix an integer overflow in logical block size
  Fix built-in early-load Intel microcode alignment
  ALSA: seq: Fix racy access for queue timer in proc read
  clk: Don't try to enable critical clocks if prepare failed
  dt-bindings: reset: meson8b: fix duplicate reset IDs
  ocfs2: call journal flush to mark journal as empty after journal recovery when mount
  hexagon: work around compiler crash
  hexagon: parenthesize registers in asm predicates
  ioat: ioat_alloc_ring() failure handling.
  MIPS: Prevent link failure with kcov instrumentation
  rseq/selftests: Turn off timeout setting
  scsi: libcxgbi: fix NULL pointer dereference in cxgbi_device_destroy()
  gpio: mpc8xxx: Add platform device to gpiochip->parent
  rtc: msm6242: Fix reading of 10-hour digit
  f2fs: fix potential overflow
  rtlwifi: Remove unnecessary NULL check in rtl_regd_init
  spi: atmel: fix handling of cs_change set on non-last xfer
  mtd: spi-nor: fix silent truncation in spi_nor_read()
  media: exynos4-is: Fix recursive locking in isp_video_release()
  tty: serial: pch_uart: correct usage of dma_unmap_sg
  tty: serial: imx: use the sg count from dma_map_sg
  powerpc/powernv: Disable native PCIe port management
  PCI/PTM: Remove spurious "d" from granularity message
  compat_ioctl: handle SIOCOUTQNSD
  clk: samsung: exynos5420: Preserve CPU clocks configuration during suspend/resume
  mei: fix modalias documentation
  iio: imu: adis16480: assign bias value only if operation succeeded
  platform/x86: asus-wmi: Fix keyboard brightness cannot be set to 0
  scsi: sd: Clear sdkp->protection_type if disk is reformatted without PI
  scsi: enclosure: Fix stale device oops with hot replug
  RDMA/srpt: Report the SCSI residual to the initiator
  cifs: Adjust indentation in smb2_open_file
  hsr: reset network header when supervision frame is created
  gpio: Fix error message on out-of-range GPIO in lookup table
  iommu: Remove device link to group on failure
  rtc: mt6397: fix alarm register overwrite
  dccp: Fix memleak in __feat_register_sp
  ext4: add more paranoia checking in ext4_expand_extra_isize handling
  ext4: fix use-after-free race with debug_want_extra_isize
  wimax: i2400: Fix memory leak in i2400m_op_rfkill_sw_toggle
  wimax: i2400: fix memory leak
  media: usb:zr364xx:Fix KASAN:null-ptr-deref Read in zr364xx_vidioc_querycap
  mac80211: Do not send Layer 2 Update frame before authorization
  cfg80211/mac80211: make ieee80211_send_layer2_update a public function
  arm64: Make sure permission updates happen for pmd/pud
  arm64: Enforce BBM for huge IO/VMAP mappings
  arm64: mm: Change page table pointer name in p[md]_set_huge()
  arm64: don't open code page table entry creation
  arm64: mm: BUG on unsupported manipulations of live kernel mappings
  rsi: add fix for crash during assertions
  fs/select: avoid clang stack usage warning
  ethtool: reduce stack usage with clang
  HID: hidraw, uhid: Always report EPOLLOUT
  HID: hidraw: Fix returning EPOLLOUT from hidraw_poll
  hidraw: Return EPOLLOUT from hidraw_poll

 Conflicts:
	arch/arm64/mm/mmu.c
	net/core/ethtool.c
	net/wireless/util.c
Change-Id: I30903e27ed5fd45500154bbd11534386f29e30d7
Signed-off-by: jianzhou <jianzhou@codeaurora.org>
This commit is contained in:
jianzhou 2020-03-13 15:56:44 +08:00
commit 76d3252406
101 changed files with 583 additions and 556 deletions

View file

@ -4,7 +4,7 @@ KernelVersion: 3.10
Contact: Samuel Ortiz <sameo@linux.intel.com>
linux-mei@linux.intel.com
Description: Stores the same MODALIAS value emitted by uevent
Format: mei:<mei device name>:<device uuid>:
Format: mei:<mei device name>:<device uuid>:<protocol version>
What: /sys/bus/mei/devices/.../name
Date: May 2015

View file

@ -1,6 +1,6 @@
VERSION = 4
PATCHLEVEL = 9
SUBLEVEL = 210
SUBLEVEL = 211
EXTRAVERSION =
NAME = Roaring Lionus

View file

@ -56,10 +56,10 @@
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <0 120 8>,
<0 121 8>,
<0 122 8>,
<0 123 8>;
interrupts = <0 170 4>,
<0 171 4>,
<0 172 4>,
<0 173 4>;
interrupt-affinity = <&cpu0>,
<&cpu1>,
<&cpu2>,

View file

@ -300,6 +300,11 @@ static inline bool __kvm_cpu_uses_extended_idmap(void)
return __cpu_uses_extended_idmap();
}
/*
* Can't use pgd_populate here, because the extended idmap adds an extra level
* above CONFIG_PGTABLE_LEVELS (which is 2 or 3 if we're using the extended
* idmap), and pgd_populate is only available if CONFIG_PGTABLE_LEVELS = 4.
*/
static inline void __kvm_extend_hypmap(pgd_t *boot_hyp_pgd,
pgd_t *hyp_pgd,
pgd_t *merged_hyp_pgd,

View file

@ -244,8 +244,7 @@ static int create_safe_exec_page(void *src_start, size_t length,
}
pte = pte_offset_kernel(pmd, dst_addr);
set_pte(pte, __pte(virt_to_phys((void *)dst) |
pgprot_val(PAGE_KERNEL_EXEC)));
set_pte(pte, pfn_pte(virt_to_pfn(dst), PAGE_KERNEL_EXEC));
/*
* Load our new page tables. A strict BBM approach requires that we

73
arch/arm64/mm/mmu.c Normal file → Executable file
View file

@ -166,8 +166,17 @@ static void alloc_init_pte(pmd_t *pmd, unsigned long addr,
pte = pte_set_fixmap_offset(pmd, addr);
do {
pte_t old_pte = *pte;
set_pte(pte, pfn_pte(pfn, prot));
pfn++;
/*
* After the PTE entry has been populated once, we
* only allow updates to the permission attributes.
*/
BUG_ON(!pgattr_change_is_safe(pte_val(old_pte), pte_val(*pte)));
} while (pte++, addr += PAGE_SIZE, addr != end);
pte_clear_fixmap();
@ -197,28 +206,29 @@ static void alloc_init_pmd(pud_t *pud, unsigned long addr, unsigned long end,
pmd = pmd_set_fixmap_offset(pud, addr);
do {
pmd_t old_pmd = *pmd;
next = pmd_addr_end(addr, end);
/* try section mapping first */
if (((addr | next | phys) & ~SECTION_MASK) == 0 &&
allow_block_mappings &&
!dma_overlap(phys, phys + next - addr)) {
pmd_t old_pmd =*pmd;
pmd_set_huge(pmd, phys, prot);
/*
* Check for previous table entries created during
* boot (__create_page_tables) and flush them.
* After the PMD entry has been populated once, we
* only allow updates to the permission attributes.
*/
if (!pmd_none(old_pmd)) {
flush_tlb_all();
if (pmd_table(old_pmd)) {
phys_addr_t table = pmd_page_paddr(old_pmd);
if (!WARN_ON_ONCE(slab_is_available()))
memblock_free(table, PAGE_SIZE);
}
}
BUG_ON(!pgattr_change_is_safe(pmd_val(old_pmd),
pmd_val(*pmd)));
} else {
alloc_init_pte(pmd, addr, next, __phys_to_pfn(phys),
prot, pgtable_alloc);
BUG_ON(pmd_val(old_pmd) != 0 &&
pmd_val(old_pmd) != pmd_val(*pmd));
}
phys += next - addr;
} while (pmd++, addr = next, addr != end);
@ -256,6 +266,8 @@ static void alloc_init_pud(pgd_t *pgd, unsigned long addr, unsigned long end,
pud = pud_set_fixmap_offset(pgd, addr);
do {
pud_t old_pud = *pud;
next = pud_addr_end(addr, end);
/*
@ -267,23 +279,17 @@ static void alloc_init_pud(pgd_t *pgd, unsigned long addr, unsigned long end,
pud_set_huge(pud, phys, prot);
/*
* If we have an old value for a pud, it will
* be pointing to a pmd table that we no longer
* need (from swapper_pg_dir).
*
* Look up the old pmd table and free it.
* After the PUD entry has been populated once, we
* only allow updates to the permission attributes.
*/
if (!pud_none(old_pud)) {
flush_tlb_all();
if (pud_table(old_pud)) {
phys_addr_t table = pud_page_paddr(old_pud);
if (!WARN_ON_ONCE(slab_is_available()))
memblock_free(table, PAGE_SIZE);
}
}
BUG_ON(!pgattr_change_is_safe(pud_val(old_pud),
pud_val(*pud)));
} else {
alloc_init_pmd(pud, addr, next, phys, prot,
pgtable_alloc, allow_block_mappings);
BUG_ON(pud_val(old_pud) != 0 &&
pud_val(old_pud) != pud_val(*pud));
}
phys += next - addr;
} while (pud++, addr = next, addr != end);
@ -449,6 +455,9 @@ void mark_rodata_ro(void)
section_size = (unsigned long)__init_begin - (unsigned long)__start_rodata;
create_mapping_late(__pa_symbol(__start_rodata), (unsigned long)__start_rodata,
section_size, PAGE_KERNEL_RO);
/* flush the TLBs after updating live kernel mappings */
flush_tlb_all();
}
static void __init map_kernel_segment(pgd_t *pgd, void *va_start, void *va_end,
@ -532,8 +541,8 @@ static void __init map_kernel(pgd_t *pgd)
* entry instead.
*/
BUG_ON(!IS_ENABLED(CONFIG_ARM64_16K_PAGES));
set_pud(pud_set_fixmap_offset(pgd, FIXADDR_START),
__pud(__pa_symbol(bm_pmd) | PUD_TYPE_TABLE));
pud_populate(&init_mm, pud_set_fixmap_offset(pgd, FIXADDR_START),
lm_alias(bm_pmd));
pud_clear_fixmap();
} else {
BUG();
@ -648,7 +657,7 @@ int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node)
if (!p)
return -ENOMEM;
set_pmd(pmd, __pmd(__pa(p) | PROT_SECT_NORMAL));
pmd_set_huge(pmd, __pa(p), __pgprot(PROT_SECT_NORMAL));
} else
vmemmap_verify((pte_t *)pmd, node, addr, next);
} while (addr = next, addr != end);
@ -840,35 +849,35 @@ int __init arch_ioremap_pmd_supported(void)
return !IS_ENABLED(CONFIG_ARM64_PTDUMP_DEBUGFS);
}
int pud_set_huge(pud_t *pud, phys_addr_t phys, pgprot_t prot)
int pud_set_huge(pud_t *pudp, phys_addr_t phys, pgprot_t prot)
{
pgprot_t sect_prot = __pgprot(PUD_TYPE_SECT |
pgprot_val(mk_sect_prot(prot)));
pud_t new_pud = pfn_pud(__phys_to_pfn(phys), sect_prot);
/* Only allow permission changes for now */
if (!pgattr_change_is_safe(READ_ONCE(pud_val(*pud)),
if (!pgattr_change_is_safe(READ_ONCE(pud_val(*pudp)),
pud_val(new_pud)))
return 0;
BUG_ON(phys & ~PUD_MASK);
set_pud(pud, new_pud);
set_pud(pudp, new_pud);
return 1;
}
int pmd_set_huge(pmd_t *pmd, phys_addr_t phys, pgprot_t prot)
int pmd_set_huge(pmd_t *pmdp, phys_addr_t phys, pgprot_t prot)
{
pgprot_t sect_prot = __pgprot(PMD_TYPE_SECT |
pgprot_val(mk_sect_prot(prot)));
pmd_t new_pmd = pfn_pmd(__phys_to_pfn(phys), sect_prot);
/* Only allow permission changes for now */
if (!pgattr_change_is_safe(READ_ONCE(pmd_val(*pmd)),
if (!pgattr_change_is_safe(READ_ONCE(pmd_val(*pmdp)),
pmd_val(new_pmd)))
return 0;
BUG_ON(phys & ~PMD_MASK);
set_pmd(pmd, new_pmd);
set_pmd(pmdp, new_pmd);
return 1;
}

View file

@ -103,7 +103,7 @@ static inline void atomic_##op(int i, atomic_t *v) \
"1: %0 = memw_locked(%1);\n" \
" %0 = "#op "(%0,%2);\n" \
" memw_locked(%1,P3)=%0;\n" \
" if !P3 jump 1b;\n" \
" if (!P3) jump 1b;\n" \
: "=&r" (output) \
: "r" (&v->counter), "r" (i) \
: "memory", "p3" \
@ -119,7 +119,7 @@ static inline int atomic_##op##_return(int i, atomic_t *v) \
"1: %0 = memw_locked(%1);\n" \
" %0 = "#op "(%0,%2);\n" \
" memw_locked(%1,P3)=%0;\n" \
" if !P3 jump 1b;\n" \
" if (!P3) jump 1b;\n" \
: "=&r" (output) \
: "r" (&v->counter), "r" (i) \
: "memory", "p3" \
@ -136,7 +136,7 @@ static inline int atomic_fetch_##op(int i, atomic_t *v) \
"1: %0 = memw_locked(%2);\n" \
" %1 = "#op "(%0,%3);\n" \
" memw_locked(%2,P3)=%1;\n" \
" if !P3 jump 1b;\n" \
" if (!P3) jump 1b;\n" \
: "=&r" (output), "=&r" (val) \
: "r" (&v->counter), "r" (i) \
: "memory", "p3" \
@ -185,7 +185,7 @@ static inline int __atomic_add_unless(atomic_t *v, int a, int u)
" }"
" memw_locked(%2, p3) = %1;"
" {"
" if !p3 jump 1b;"
" if (!p3) jump 1b;"
" }"
"2:"
: "=&r" (__oldval), "=&r" (tmp)

View file

@ -52,7 +52,7 @@ static inline int test_and_clear_bit(int nr, volatile void *addr)
"1: R12 = memw_locked(R10);\n"
" { P0 = tstbit(R12,R11); R12 = clrbit(R12,R11); }\n"
" memw_locked(R10,P1) = R12;\n"
" {if !P1 jump 1b; %0 = mux(P0,#1,#0);}\n"
" {if (!P1) jump 1b; %0 = mux(P0,#1,#0);}\n"
: "=&r" (oldval)
: "r" (addr), "r" (nr)
: "r10", "r11", "r12", "p0", "p1", "memory"
@ -76,7 +76,7 @@ static inline int test_and_set_bit(int nr, volatile void *addr)
"1: R12 = memw_locked(R10);\n"
" { P0 = tstbit(R12,R11); R12 = setbit(R12,R11); }\n"
" memw_locked(R10,P1) = R12;\n"
" {if !P1 jump 1b; %0 = mux(P0,#1,#0);}\n"
" {if (!P1) jump 1b; %0 = mux(P0,#1,#0);}\n"
: "=&r" (oldval)
: "r" (addr), "r" (nr)
: "r10", "r11", "r12", "p0", "p1", "memory"
@ -102,7 +102,7 @@ static inline int test_and_change_bit(int nr, volatile void *addr)
"1: R12 = memw_locked(R10);\n"
" { P0 = tstbit(R12,R11); R12 = togglebit(R12,R11); }\n"
" memw_locked(R10,P1) = R12;\n"
" {if !P1 jump 1b; %0 = mux(P0,#1,#0);}\n"
" {if (!P1) jump 1b; %0 = mux(P0,#1,#0);}\n"
: "=&r" (oldval)
: "r" (addr), "r" (nr)
: "r10", "r11", "r12", "p0", "p1", "memory"
@ -237,7 +237,7 @@ static inline int ffs(int x)
int r;
asm("{ P0 = cmp.eq(%1,#0); %0 = ct0(%1);}\n"
"{ if P0 %0 = #0; if !P0 %0 = add(%0,#1);}\n"
"{ if (P0) %0 = #0; if (!P0) %0 = add(%0,#1);}\n"
: "=&r" (r)
: "r" (x)
: "p0");

View file

@ -44,7 +44,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
__asm__ __volatile__ (
"1: %0 = memw_locked(%1);\n" /* load into retval */
" memw_locked(%1,P0) = %2;\n" /* store into memory */
" if !P0 jump 1b;\n"
" if (!P0) jump 1b;\n"
: "=&r" (retval)
: "r" (ptr), "r" (x)
: "memory", "p0"

View file

@ -15,7 +15,7 @@
/* For example: %1 = %4 */ \
insn \
"2: memw_locked(%3,p2) = %1;\n" \
" if !p2 jump 1b;\n" \
" if (!p2) jump 1b;\n" \
" %1 = #0;\n" \
"3:\n" \
".section .fixup,\"ax\"\n" \
@ -83,10 +83,10 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, u32 oldval,
"1: %1 = memw_locked(%3)\n"
" {\n"
" p2 = cmp.eq(%1,%4)\n"
" if !p2.new jump:NT 3f\n"
" if (!p2.new) jump:NT 3f\n"
" }\n"
"2: memw_locked(%3,p2) = %5\n"
" if !p2 jump 1b\n"
" if (!p2) jump 1b\n"
"3:\n"
".section .fixup,\"ax\"\n"
"4: %0 = #%6\n"

View file

@ -44,9 +44,9 @@ static inline void arch_read_lock(arch_rwlock_t *lock)
__asm__ __volatile__(
"1: R6 = memw_locked(%0);\n"
" { P3 = cmp.ge(R6,#0); R6 = add(R6,#1);}\n"
" { if !P3 jump 1b; }\n"
" { if (!P3) jump 1b; }\n"
" memw_locked(%0,P3) = R6;\n"
" { if !P3 jump 1b; }\n"
" { if (!P3) jump 1b; }\n"
:
: "r" (&lock->lock)
: "memory", "r6", "p3"
@ -60,7 +60,7 @@ static inline void arch_read_unlock(arch_rwlock_t *lock)
"1: R6 = memw_locked(%0);\n"
" R6 = add(R6,#-1);\n"
" memw_locked(%0,P3) = R6\n"
" if !P3 jump 1b;\n"
" if (!P3) jump 1b;\n"
:
: "r" (&lock->lock)
: "memory", "r6", "p3"
@ -75,7 +75,7 @@ static inline int arch_read_trylock(arch_rwlock_t *lock)
__asm__ __volatile__(
" R6 = memw_locked(%1);\n"
" { %0 = #0; P3 = cmp.ge(R6,#0); R6 = add(R6,#1);}\n"
" { if !P3 jump 1f; }\n"
" { if (!P3) jump 1f; }\n"
" memw_locked(%1,P3) = R6;\n"
" { %0 = P3 }\n"
"1:\n"
@ -102,9 +102,9 @@ static inline void arch_write_lock(arch_rwlock_t *lock)
__asm__ __volatile__(
"1: R6 = memw_locked(%0)\n"
" { P3 = cmp.eq(R6,#0); R6 = #-1;}\n"
" { if !P3 jump 1b; }\n"
" { if (!P3) jump 1b; }\n"
" memw_locked(%0,P3) = R6;\n"
" { if !P3 jump 1b; }\n"
" { if (!P3) jump 1b; }\n"
:
: "r" (&lock->lock)
: "memory", "r6", "p3"
@ -118,7 +118,7 @@ static inline int arch_write_trylock(arch_rwlock_t *lock)
__asm__ __volatile__(
" R6 = memw_locked(%1)\n"
" { %0 = #0; P3 = cmp.eq(R6,#0); R6 = #-1;}\n"
" { if !P3 jump 1f; }\n"
" { if (!P3) jump 1f; }\n"
" memw_locked(%1,P3) = R6;\n"
" %0 = P3;\n"
"1:\n"
@ -141,9 +141,9 @@ static inline void arch_spin_lock(arch_spinlock_t *lock)
__asm__ __volatile__(
"1: R6 = memw_locked(%0);\n"
" P3 = cmp.eq(R6,#0);\n"
" { if !P3 jump 1b; R6 = #1; }\n"
" { if (!P3) jump 1b; R6 = #1; }\n"
" memw_locked(%0,P3) = R6;\n"
" { if !P3 jump 1b; }\n"
" { if (!P3) jump 1b; }\n"
:
: "r" (&lock->lock)
: "memory", "r6", "p3"
@ -163,7 +163,7 @@ static inline unsigned int arch_spin_trylock(arch_spinlock_t *lock)
__asm__ __volatile__(
" R6 = memw_locked(%1);\n"
" P3 = cmp.eq(R6,#0);\n"
" { if !P3 jump 1f; R6 = #1; %0 = #0; }\n"
" { if (!P3) jump 1f; R6 = #1; %0 = #0; }\n"
" memw_locked(%1,P3) = R6;\n"
" %0 = P3;\n"
"1:\n"

View file

@ -23,8 +23,6 @@
#include <linux/thread_info.h>
#include <linux/module.h>
register unsigned long current_frame_pointer asm("r30");
struct stackframe {
unsigned long fp;
unsigned long rets;
@ -42,7 +40,7 @@ void save_stack_trace(struct stack_trace *trace)
low = (unsigned long)task_stack_page(current);
high = low + THREAD_SIZE;
fp = current_frame_pointer;
fp = (unsigned long)__builtin_frame_address(0);
while (fp >= low && fp <= (high - sizeof(*frame))) {
frame = (struct stackframe *)fp;

View file

@ -382,7 +382,7 @@ ret_from_fork:
R26.L = #LO(do_work_pending);
R0 = #VM_INT_DISABLE;
}
if P0 jump check_work_pending
if (P0) jump check_work_pending
{
R0 = R25;
callr R24

View file

@ -29,6 +29,9 @@ KBUILD_AFLAGS := $(LINUXINCLUDE) $(KBUILD_AFLAGS) -D__ASSEMBLY__ \
-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) \
-DKERNEL_ENTRY=$(VMLINUX_ENTRY_ADDRESS)
# Prevents link failures: __sanitizer_cov_trace_pc() is not linked in.
KCOV_INSTRUMENT := n
# decompressor objects (linked with vmlinuz)
vmlinuzobjs-y := $(obj)/head.o $(obj)/decompress.o $(obj)/string.o

View file

@ -923,6 +923,23 @@ void __init pnv_pci_init(void)
if (!firmware_has_feature(FW_FEATURE_OPAL))
return;
#ifdef CONFIG_PCIEPORTBUS
/*
* On PowerNV PCIe devices are (currently) managed in cooperation
* with firmware. This isn't *strictly* required, but there's enough
* assumptions baked into both firmware and the platform code that
* it's unwise to allow the portbus services to be used.
*
* We need to fix this eventually, but for now set this flag to disable
* the portbus driver. The AER service isn't required since that AER
* events are handled via EEH. The pciehp hotplug driver can't work
* without kernel changes (and portbus binding breaks pnv_php). The
* other services also require some thinking about how we're going
* to integrate them.
*/
pcie_ports_disabled = true;
#endif
/* Look for IODA IO-Hubs. */
for_each_compatible_node(np, NULL, "ibm,ioda-hub") {
pnv_pci_init_ioda_hub(np);

View file

@ -227,6 +227,11 @@ ENTRY(efi32_stub_entry)
leal efi32_config(%ebp), %eax
movl %eax, efi_config(%ebp)
/* Disable paging */
movl %cr0, %eax
btrl $X86_CR0_PG_BIT, %eax
movl %eax, %cr0
jmp startup_32
ENDPROC(efi32_stub_entry)
#endif

View file

@ -350,7 +350,7 @@ EXPORT_SYMBOL(blk_queue_max_segment_size);
* storage device can address. The default of 512 covers most
* hardware.
**/
void blk_queue_logical_block_size(struct request_queue *q, unsigned short size)
void blk_queue_logical_block_size(struct request_queue *q, unsigned int size)
{
q->limits.logical_block_size = size;

View file

@ -1104,8 +1104,8 @@ static int xlvbd_alloc_gendisk(blkif_sector_t capacity,
if (!VDEV_IS_EXTENDED(info->vdevice)) {
err = xen_translate_vdev(info->vdevice, &minor, &offset);
if (err)
return err;
nr_parts = PARTS_PER_DISK;
return err;
nr_parts = PARTS_PER_DISK;
} else {
minor = BLKIF_MINOR_EXT(info->vdevice);
nr_parts = PARTS_PER_EXT_DISK;

View file

@ -3273,11 +3273,17 @@ static int __clk_core_init(struct clk_core *core)
if (core->flags & CLK_IS_CRITICAL) {
unsigned long flags;
clk_core_prepare(core);
ret = clk_core_prepare(core);
if (ret)
goto out;
flags = clk_enable_lock();
clk_core_enable(core);
ret = clk_core_enable(core);
clk_enable_unlock(flags);
if (ret) {
clk_core_unprepare(core);
goto out;
}
}
/*

View file

@ -170,6 +170,8 @@ static const unsigned long exynos5x_clk_regs[] __initconst = {
GATE_BUS_CPU,
GATE_SCLK_CPU,
CLKOUT_CMU_CPU,
APLL_CON0,
KPLL_CON0,
CPLL_CON0,
DPLL_CON0,
EPLL_CON0,

Some files were not shown because too many files have changed in this diff Show more