joy/android_kernel_sony_sdm845
Watch
1
Fork
You've already forked android_kernel_sony_sdm845
 0
Code Issues Pull requests Projects Releases Wiki Activity

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Browse source 
Conflicts:
	drivers/net/ethernet/cavium/Kconfig

The cavium conflict was overlapping dependency
changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
David S. Miller 2015-08-13 16:23:11 -07:00
commit 182ad468e7
314 changed files with 3071 additions and 1831 deletions
Download patch file Download diff file Expand all files Collapse all files

2
Documentation/devicetree/bindings/dma/apm-xgene-dma.txt
View file

@ -35,7 +35,7 @@ Example:
device_type = "dma";
reg = <0x0 0x1f270000 0x0 0x10000>,
<0x0 0x1f200000 0x0 0x10000>,
<0x0 0x1b008000 0x0 0x2000>,
<0x0 0x1b000000 0x0 0x400000>,
<0x0 0x1054a000 0x0 0x100>;
interrupts = <0x0 0x82 0x4>,
<0x0 0xb8 0x4>,

16
Documentation/devicetree/bindings/phy/ti-phy.txt
View file

@ -82,6 +82,9 @@ Optional properties:
- id: If there are multiple instance of the same type, in order to
differentiate between each instance "id" can be used (e.g., multi-lane PCIe
PHY). If "id" is not provided, it is set to default value of '1'.
- syscon-pllreset: Handle to system control region that contains the
CTRL_CORE_SMA_SW_0 register and register offset to the CTRL_CORE_SMA_SW_0
register that contains the SATA_PLL_SOFT_RESET bit. Only valid for sata_phy.
This is usually a subnode of ocp2scp to which it is connected.
@ -100,3 +103,16 @@ usb3phy@4a084400 {
"sysclk",
"refclk";
};
sata_phy: phy@4A096000 {
compatible = "ti,phy-pipe3-sata";
reg = <0x4A096000 0x80>, /* phy_rx */
<0x4A096400 0x64>, /* phy_tx */
<0x4A096800 0x40>; /* pll_ctrl */
reg-names = "phy_rx", "phy_tx", "pll_ctrl";
ctrl-module = <&omap_control_sata>;
clocks = <&sys_clkin1>, <&sata_ref_clk>;
clock-names = "sysclk", "refclk";
syscon-pllreset = <&scm_conf 0x3fc>;
#phy-cells = <0>;
};

6
Documentation/input/alps.txt
View file

@ -119,8 +119,10 @@ ALPS Absolute Mode - Protocol Version 2
byte 5: 0 z6 z5 z4 z3 z2 z1 z0
Protocol Version 2 DualPoint devices send standard PS/2 mouse packets for
the DualPoint Stick. For non interleaved dualpoint devices the pointingstick
buttons get reported separately in the PSM, PSR and PSL bits.
the DualPoint Stick. The M, R and L bits signal the combined status of both
the pointingstick and touchpad buttons, except for Dell dualpoint devices
where the pointingstick buttons get reported separately in the PSM, PSR
and PSL bits.
Dualpoint device -- interleaved packet format
---------------------------------------------

6
MAINTAINERS
View file

@ -5600,6 +5600,7 @@ F: kernel/irq/
IRQCHIP DRIVERS
M: Thomas Gleixner <tglx@linutronix.de>
M: Jason Cooper <jason@lakedaemon.net>
M: Marc Zyngier <marc.zyngier@arm.com>
L: linux-kernel@vger.kernel.org
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
@ -5608,11 +5609,14 @@ F: Documentation/devicetree/bindings/interrupt-controller/
F: drivers/irqchip/
IRQ DOMAINS (IRQ NUMBER MAPPING LIBRARY)
M: Benjamin Herrenschmidt <benh@kernel.crashing.org>
M: Jiang Liu <jiang.liu@linux.intel.com>
M: Marc Zyngier <marc.zyngier@arm.com>
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
F: Documentation/IRQ-domain.txt
F: include/linux/irqdomain.h
F: kernel/irq/irqdomain.c
F: kernel/irq/msi.c
ISAPNP
M: Jaroslav Kysela <perex@perex.cz>

11
Makefile
View file

@ -1,7 +1,7 @@
VERSION = 4
PATCHLEVEL = 2
SUBLEVEL = 0
EXTRAVERSION = -rc4
EXTRAVERSION = -rc6
NAME = Hurr durr I'ma sheep
# *DOCUMENTATION*
@ -597,6 +597,11 @@ endif # $(dot-config)
# Defaults to vmlinux, but the arch makefile usually adds further targets
all: vmlinux
# The arch Makefile can set ARCH_{CPP,A,C}FLAGS to override the default
# values of the respective KBUILD_* variables
ARCH_CPPFLAGS :=
ARCH_AFLAGS :=
ARCH_CFLAGS :=
include arch/$(SRCARCH)/Makefile
KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks,)
@ -848,10 +853,10 @@ export mod_strip_cmd
mod_compress_cmd = true
ifdef CONFIG_MODULE_COMPRESS
ifdef CONFIG_MODULE_COMPRESS_GZIP
mod_compress_cmd = gzip -n
mod_compress_cmd = gzip -n -f
endif # CONFIG_MODULE_COMPRESS_GZIP
ifdef CONFIG_MODULE_COMPRESS_XZ
mod_compress_cmd = xz
mod_compress_cmd = xz -f
endif # CONFIG_MODULE_COMPRESS_XZ
endif # CONFIG_MODULE_COMPRESS
export mod_compress_cmd

13
arch/arc/Kconfig
View file

@ -313,11 +313,11 @@ config ARC_PAGE_SIZE_8K
config ARC_PAGE_SIZE_16K
bool "16KB"
depends on ARC_MMU_V3
depends on ARC_MMU_V3 || ARC_MMU_V4
config ARC_PAGE_SIZE_4K
bool "4KB"
depends on ARC_MMU_V3
depends on ARC_MMU_V3 || ARC_MMU_V4
endchoice
@ -365,6 +365,11 @@ config ARC_HAS_LLSC
default y
depends on !ARC_CANT_LLSC
config ARC_STAR_9000923308
bool "Workaround for llock/scond livelock"
default y
depends on ISA_ARCV2 && SMP && ARC_HAS_LLSC
config ARC_HAS_SWAPE
bool "Insn: SWAPE (endian-swap)"
default y
@ -379,6 +384,10 @@ config ARC_HAS_LL64
dest operands with 2 possible source operands.
default y
config ARC_HAS_DIV_REM
bool "Insn: div, divu, rem, remu"
default y
config ARC_HAS_RTC
bool "Local 64-bit r/o cycle counter"
default n

10
arch/arc/Makefile
View file

@ -36,8 +36,16 @@ cflags-$(atleast_gcc44) += -fsection-anchors
cflags-$(CONFIG_ARC_HAS_LLSC) += -mlock
cflags-$(CONFIG_ARC_HAS_SWAPE) += -mswape
ifdef CONFIG_ISA_ARCV2
ifndef CONFIG_ARC_HAS_LL64
cflags-$(CONFIG_ISA_ARCV2) += -mno-ll64
cflags-y += -mno-ll64
endif
ifndef CONFIG_ARC_HAS_DIV_REM
cflags-y += -mno-div-rem
endif
endif
cflags-$(CONFIG_ARC_DW2_UNWIND) += -fasynchronous-unwind-tables

7
arch/arc/include/asm/arcregs.h
View file

@ -89,11 +89,10 @@
#define ECR_C_BIT_DTLB_LD_MISS 8
#define ECR_C_BIT_DTLB_ST_MISS 9
/* Auxiliary registers */
#define AUX_IDENTITY 4
#define AUX_INTR_VEC_BASE 0x25
#define AUX_NON_VOL 0x5e
/*
* Floating Pt Registers
@ -240,9 +239,9 @@ struct bcr_extn_xymem {
struct bcr_perip {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int start:8, pad2:8, sz:8, pad:8;
unsigned int start:8, pad2:8, sz:8, ver:8;
#else
unsigned int pad:8, sz:8, pad2:8, start:8;
unsigned int ver:8, sz:8, pad2:8, start:8;
#endif
};

78
arch/arc/include/asm/atomic.h
View file

@ -23,33 +23,60 @@
#define atomic_set(v, i) (((v)->counter) = (i))
#ifdef CONFIG_ISA_ARCV2
#define PREFETCHW " prefetchw [%1] \n"
#else
#define PREFETCHW
#ifdef CONFIG_ARC_STAR_9000923308
#define SCOND_FAIL_RETRY_VAR_DEF \
unsigned int delay = 1, tmp; \
#define SCOND_FAIL_RETRY_ASM \
" bz 4f \n" \
" ; --- scond fail delay --- \n" \
" mov %[tmp], %[delay] \n" /* tmp = delay */ \
"2: brne.d %[tmp], 0, 2b \n" /* while (tmp != 0) */ \
" sub %[tmp], %[tmp], 1 \n" /* tmp-- */ \
" rol %[delay], %[delay] \n" /* delay *= 2 */ \
" b 1b \n" /* start over */ \
"4: ; --- success --- \n" \
#define SCOND_FAIL_RETRY_VARS \
,[delay] "+&r" (delay),[tmp] "=&r" (tmp) \
#else /* !CONFIG_ARC_STAR_9000923308 */
#define SCOND_FAIL_RETRY_VAR_DEF
#define SCOND_FAIL_RETRY_ASM \
" bnz 1b \n" \
#define SCOND_FAIL_RETRY_VARS
#endif
#define ATOMIC_OP(op, c_op, asm_op) \
static inline void atomic_##op(int i, atomic_t *v) \
{ \
unsigned int temp; \
unsigned int val; \
SCOND_FAIL_RETRY_VAR_DEF \
\
__asm__ __volatile__( \
"1: \n" \
PREFETCHW \
" llock %0, [%1] \n" \
" " #asm_op " %0, %0, %2 \n" \
" scond %0, [%1] \n" \
" bnz 1b \n" \
: "=&r"(temp) /* Early clobber, to prevent reg reuse */ \
: "r"(&v->counter), "ir"(i) \
"1: llock %[val], [%[ctr]] \n" \
" " #asm_op " %[val], %[val], %[i] \n" \
" scond %[val], [%[ctr]] \n" \
" \n" \
SCOND_FAIL_RETRY_ASM \
\
: [val] "=&r" (val) /* Early clobber to prevent reg reuse */ \
SCOND_FAIL_RETRY_VARS \
: [ctr] "r" (&v->counter), /* Not "m": llock only supports reg direct addr mode */ \
[i] "ir" (i) \
: "cc"); \
} \
#define ATOMIC_OP_RETURN(op, c_op, asm_op) \
static inline int atomic_##op##_return(int i, atomic_t *v) \
{ \
unsigned int temp; \
unsigned int val; \
SCOND_FAIL_RETRY_VAR_DEF \
\
/* \
* Explicit full memory barrier needed before/after as \
@ -58,19 +85,21 @@ static inline int atomic_##op##_return(int i, atomic_t *v) \
smp_mb(); \
\
__asm__ __volatile__( \
"1: \n" \
PREFETCHW \
" llock %0, [%1] \n" \
" " #asm_op " %0, %0, %2 \n" \
" scond %0, [%1] \n" \
" bnz 1b \n" \
: "=&r"(temp) \
: "r"(&v->counter), "ir"(i) \
"1: llock %[val], [%[ctr]] \n" \
" " #asm_op " %[val], %[val], %[i] \n" \
" scond %[val], [%[ctr]] \n" \
" \n" \
SCOND_FAIL_RETRY_ASM \
\
: [val] "=&r" (val) \
SCOND_FAIL_RETRY_VARS \
: [ctr] "r" (&v->counter), \
[i] "ir" (i) \
: "cc"); \
\
smp_mb(); \
\
return temp; \
return val; \
}
#else /* !CONFIG_ARC_HAS_LLSC */
@ -150,6 +179,9 @@ ATOMIC_OP(and, &=, and)
#undef ATOMIC_OPS
#undef ATOMIC_OP_RETURN
#undef ATOMIC_OP
#undef SCOND_FAIL_RETRY_VAR_DEF
#undef SCOND_FAIL_RETRY_ASM
#undef SCOND_FAIL_RETRY_VARS
/**
* __atomic_add_unless - add unless the number is a given value

54
arch/arc/include/asm/ptrace.h
View file

@ -20,20 +20,20 @@
struct pt_regs {
/* Real registers */
long bta; /* bta_l1, bta_l2, erbta */
unsigned long bta; /* bta_l1, bta_l2, erbta */
long lp_start, lp_end, lp_count;
unsigned long lp_start, lp_end, lp_count;
long status32; /* status32_l1, status32_l2, erstatus */
long ret; /* ilink1, ilink2 or eret */
long blink;
long fp;
long r26; /* gp */
unsigned long status32; /* status32_l1, status32_l2, erstatus */
unsigned long ret; /* ilink1, ilink2 or eret */
unsigned long blink;
unsigned long fp;
unsigned long r26; /* gp */
long r12, r11, r10, r9, r8, r7, r6, r5, r4, r3, r2, r1, r0;
unsigned long r12, r11, r10, r9, r8, r7, r6, r5, r4, r3, r2, r1, r0;
long sp; /* user/kernel sp depending on where we came from */
long orig_r0;
unsigned long sp; /* User/Kernel depending on where we came from */
unsigned long orig_r0;
/*
* To distinguish bet excp, syscall, irq
@ -55,13 +55,13 @@ struct pt_regs {
unsigned long event;
};
long user_r25;
unsigned long user_r25;
};
#else
struct pt_regs {
long orig_r0;
unsigned long orig_r0;
union {
struct {
@ -76,26 +76,26 @@ struct pt_regs {
unsigned long event;
};
long bta; /* bta_l1, bta_l2, erbta */
unsigned long bta; /* bta_l1, bta_l2, erbta */
long user_r25;
unsigned long user_r25;
long r26; /* gp */
long fp;
long sp; /* user/kernel sp depending on where we came from */
unsigned long r26; /* gp */
unsigned long fp;
unsigned long sp; /* user/kernel sp depending on where we came from */
long r12;
unsigned long r12;
/*------- Below list auto saved by h/w -----------*/
long r0, r1, r2, r3, r4, r5, r6, r7, r8, r9, r10, r11;
unsigned long r0, r1, r2, r3, r4, r5, r6, r7, r8, r9, r10, r11;
long blink;
long lp_end, lp_start, lp_count;
unsigned long blink;
unsigned long lp_end, lp_start, lp_count;
long ei, ldi, jli;
unsigned long ei, ldi, jli;
long ret;
long status32;
unsigned long ret;
unsigned long status32;
};
#endif
@ -103,10 +103,10 @@ struct pt_regs {
/* Callee saved registers - need to be saved only when you are scheduled out */
struct callee_regs {
long r25, r24, r23, r22, r21, r20, r19, r18, r17, r16, r15, r14, r13;
unsigned long r25, r24, r23, r22, r21, r20, r19, r18, r17, r16, r15, r14, r13;
};
#define instruction_pointer(regs) (unsigned long)((regs)->ret)
#define instruction_pointer(regs) ((regs)->ret)
#define profile_pc(regs) instruction_pointer(regs)
/* return 1 if user mode or 0 if kernel mode */
@ -142,7 +142,7 @@ struct callee_regs {
static inline long regs_return_value(struct pt_regs *regs)
{
return regs->r0;
return (long)regs->r0;
}
#endif /* !__ASSEMBLY__ */

538
arch/arc/include/asm/spinlock.h
View file

@ -18,9 +18,518 @@
#define arch_spin_unlock_wait(x) \
do { while (arch_spin_is_locked(x)) cpu_relax(); } while (0)
#ifdef CONFIG_ARC_HAS_LLSC
/*
* A normal LLOCK/SCOND based system, w/o need for livelock workaround
*/
#ifndef CONFIG_ARC_STAR_9000923308
static inline void arch_spin_lock(arch_spinlock_t *lock)
{
unsigned int tmp = __ARCH_SPIN_LOCK_LOCKED__;
unsigned int val;
smp_mb();
__asm__ __volatile__(
"1: llock %[val], [%[slock]] \n"
" breq %[val], %[LOCKED], 1b \n" /* spin while LOCKED */
" scond %[LOCKED], [%[slock]] \n" /* acquire */
" bnz 1b \n"
" \n"
: [val] "=&r" (val)
: [slock] "r" (&(lock->slock)),
[LOCKED] "r" (__ARCH_SPIN_LOCK_LOCKED__)
: "memory", "cc");
smp_mb();
}
/* 1 - lock taken successfully */
static inline int arch_spin_trylock(arch_spinlock_t *lock)
{
unsigned int val, got_it = 0;
smp_mb();
__asm__ __volatile__(
"1: llock %[val], [%[slock]] \n"
" breq %[val], %[LOCKED], 4f \n" /* already LOCKED, just bail */
" scond %[LOCKED], [%[slock]] \n" /* acquire */
" bnz 1b \n"
" mov %[got_it], 1 \n"
"4: \n"
" \n"
: [val] "=&r" (val),
[got_it] "+&r" (got_it)
: [slock] "r" (&(lock->slock)),
[LOCKED] "r" (__ARCH_SPIN_LOCK_LOCKED__)
: "memory", "cc");
smp_mb();
return got_it;
}
static inline void arch_spin_unlock(arch_spinlock_t *lock)
{
smp_mb();
lock->slock = __ARCH_SPIN_LOCK_UNLOCKED__;
smp_mb();
}
/*
* Read-write spinlocks, allowing multiple readers but only one writer.
* Unfair locking as Writers could be starved indefinitely by Reader(s)
*/
static inline void arch_read_lock(arch_rwlock_t *rw)
{
unsigned int val;
smp_mb();
/*
* zero means writer holds the lock exclusively, deny Reader.
* Otherwise grant lock to first/subseq reader
*
* if (rw->counter > 0) {
* rw->counter--;
* ret = 1;
* }
*/
__asm__ __volatile__(
"1: llock %[val], [%[rwlock]] \n"
" brls %[val], %[WR_LOCKED], 1b\n" /* <= 0: spin while write locked */
" sub %[val], %[val], 1 \n" /* reader lock */
" scond %[val], [%[rwlock]] \n"
" bnz 1b \n"
" \n"
: [val] "=&r" (val)
: [rwlock] "r" (&(rw->counter)),
[WR_LOCKED] "ir" (0)
: "memory", "cc");
smp_mb();
}
/* 1 - lock taken successfully */
static inline int arch_read_trylock(arch_rwlock_t *rw)
{
unsigned int val, got_it = 0;
smp_mb();
__asm__ __volatile__(
"1: llock %[val], [%[rwlock]] \n"
" brls %[val], %[WR_LOCKED], 4f\n" /* <= 0: already write locked, bail */
" sub %[val], %[val], 1 \n" /* counter-- */
" scond %[val], [%[rwlock]] \n"
" bnz 1b \n" /* retry if collided with someone */
" mov %[got_it], 1 \n"
" \n"
"4: ; --- done --- \n"
: [val] "=&r" (val),
[got_it] "+&r" (got_it)
: [rwlock] "r" (&(rw->counter)),
[WR_LOCKED] "ir" (0)
: "memory", "cc");
smp_mb();
return got_it;
}
static inline void arch_write_lock(arch_rwlock_t *rw)
{
unsigned int val;
smp_mb();
/*
* If reader(s) hold lock (lock < __ARCH_RW_LOCK_UNLOCKED__),
* deny writer. Otherwise if unlocked grant to writer
* Hence the claim that Linux rwlocks are unfair to writers.
* (can be starved for an indefinite time by readers).
*
* if (rw->counter == __ARCH_RW_LOCK_UNLOCKED__) {
* rw->counter = 0;
* ret = 1;
* }
*/
__asm__ __volatile__(
"1: llock %[val], [%[rwlock]] \n"
" brne %[val], %[UNLOCKED], 1b \n" /* while !UNLOCKED spin */
" mov %[val], %[WR_LOCKED] \n"
" scond %[val], [%[rwlock]] \n"
" bnz 1b \n"
" \n"
: [val] "=&r" (val)
: [rwlock] "r" (&(rw->counter)),
[UNLOCKED] "ir" (__ARCH_RW_LOCK_UNLOCKED__),
[WR_LOCKED] "ir" (0)
: "memory", "cc");
smp_mb();
}
/* 1 - lock taken successfully */
static inline int arch_write_trylock(arch_rwlock_t *rw)
{
unsigned int val, got_it = 0;
smp_mb();
__asm__ __volatile__(
"1: llock %[val], [%[rwlock]] \n"
" brne %[val], %[UNLOCKED], 4f \n" /* !UNLOCKED, bail */
" mov %[val], %[WR_LOCKED] \n"
" scond %[val], [%[rwlock]] \n"
" bnz 1b \n" /* retry if collided with someone */
" mov %[got_it], 1 \n"
" \n"
"4: ; --- done --- \n"
: [val] "=&r" (val),
[got_it] "+&r" (got_it)
: [rwlock] "r" (&(rw->counter)),
[UNLOCKED] "ir" (__ARCH_RW_LOCK_UNLOCKED__),
[WR_LOCKED] "ir" (0)
: "memory", "cc");
smp_mb();
return got_it;
}
static inline void arch_read_unlock(arch_rwlock_t *rw)
{
unsigned int val;
smp_mb();
/*
* rw->counter++;
*/
__asm__ __volatile__(
"1: llock %[val], [%[rwlock]] \n"
" add %[val], %[val], 1 \n"
" scond %[val], [%[rwlock]] \n"
" bnz 1b \n"
" \n"
: [val] "=&r" (val)
: [rwlock] "r" (&(rw->counter))
: "memory", "cc");
smp_mb();
}
static inline void arch_write_unlock(arch_rwlock_t *rw)
{
smp_mb();
rw->counter = __ARCH_RW_LOCK_UNLOCKED__;
smp_mb();
}
#else /* CONFIG_ARC_STAR_9000923308 */
/*
* HS38x4 could get into a LLOCK/SCOND livelock in case of multiple overlapping
* coherency transactions in the SCU. The exclusive line state keeps rotating
* among contenting cores leading to a never ending cycle. So break the cycle
* by deferring the retry of failed exclusive access (SCOND). The actual delay
* needed is function of number of contending cores as well as the unrelated
* coherency traffic from other cores. To keep the code simple, start off with
* small delay of 1 which would suffice most cases and in case of contention
* double the delay. Eventually the delay is sufficient such that the coherency
* pipeline is drained, thus a subsequent exclusive access would succeed.
*/
#define SCOND_FAIL_RETRY_VAR_DEF \
unsigned int delay, tmp; \
#define SCOND_FAIL_RETRY_ASM \
" ; --- scond fail delay --- \n" \
" mov %[tmp], %[delay] \n" /* tmp = delay */ \
"2: brne.d %[tmp], 0, 2b \n" /* while (tmp != 0) */ \
" sub %[tmp], %[tmp], 1 \n" /* tmp-- */ \
" rol %[delay], %[delay] \n" /* delay *= 2 */ \
" b 1b \n" /* start over */ \
" \n" \
"4: ; --- done --- \n" \
#define SCOND_FAIL_RETRY_VARS \
,[delay] "=&r" (delay), [tmp] "=&r" (tmp) \
static inline void arch_spin_lock(arch_spinlock_t *lock)
{
unsigned int val;
SCOND_FAIL_RETRY_VAR_DEF;
smp_mb();
__asm__ __volatile__(
"0: mov %[delay], 1 \n"
"1: llock %[val], [%[slock]] \n"
" breq %[val], %[LOCKED], 0b \n" /* spin while LOCKED */
" scond %[LOCKED], [%[slock]] \n" /* acquire */
" bz 4f \n" /* done */
" \n"
SCOND_FAIL_RETRY_ASM
: [val] "=&r" (val)
SCOND_FAIL_RETRY_VARS
: [slock] "r" (&(lock->slock)),
[LOCKED] "r" (__ARCH_SPIN_LOCK_LOCKED__)
: "memory", "cc");
smp_mb();
}
/* 1 - lock taken successfully */
static inline int arch_spin_trylock(arch_spinlock_t *lock)
{
unsigned int val, got_it = 0;
SCOND_FAIL_RETRY_VAR_DEF;
smp_mb();
__asm__ __volatile__(
"0: mov %[delay], 1 \n"
"1: llock %[val], [%[slock]] \n"
" breq %[val], %[LOCKED], 4f \n" /* already LOCKED, just bail */
" scond %[LOCKED], [%[slock]] \n" /* acquire */
" bz.d 4f \n"
" mov.z %[got_it], 1 \n" /* got it */
" \n"
SCOND_FAIL_RETRY_ASM
: [val] "=&r" (val),
[got_it] "+&r" (got_it)
SCOND_FAIL_RETRY_VARS
: [slock] "r" (&(lock->slock)),
[LOCKED] "r" (__ARCH_SPIN_LOCK_LOCKED__)
: "memory", "cc");
smp_mb();
return got_it;
}
static inline void arch_spin_unlock(arch_spinlock_t *lock)
{
smp_mb();
lock->slock = __ARCH_SPIN_LOCK_UNLOCKED__;
smp_mb();
}
/*
* Read-write spinlocks, allowing multiple readers but only one writer.
* Unfair locking as Writers could be starved indefinitely by Reader(s)
*/
static inline void arch_read_lock(arch_rwlock_t *rw)
{
unsigned int val;
SCOND_FAIL_RETRY_VAR_DEF;
smp_mb();
/*
* zero means writer holds the lock exclusively, deny Reader.
* Otherwise grant lock to first/subseq reader
*
* if (rw->counter > 0) {
* rw->counter--;
* ret = 1;
* }
*/
__asm__ __volatile__(
"0: mov %[delay], 1 \n"
"1: llock %[val], [%[rwlock]] \n"
" brls %[val], %[WR_LOCKED], 0b\n" /* <= 0: spin while write locked */
" sub %[val], %[val], 1 \n" /* reader lock */
" scond %[val], [%[rwlock]] \n"
" bz 4f \n" /* done */
" \n"
SCOND_FAIL_RETRY_ASM
: [val] "=&r" (val)
SCOND_FAIL_RETRY_VARS
: [rwlock] "r" (&(rw->counter)),
[WR_LOCKED] "ir" (0)
: "memory", "cc");
smp_mb();
}
/* 1 - lock taken successfully */
static inline int arch_read_trylock(arch_rwlock_t *rw)
{
unsigned int val, got_it = 0;
SCOND_FAIL_RETRY_VAR_DEF;
smp_mb();
__asm__ __volatile__(
"0: mov %[delay], 1 \n"
"1: llock %[val], [%[rwlock]] \n"
" brls %[val], %[WR_LOCKED], 4f\n" /* <= 0: already write locked, bail */
" sub %[val], %[val], 1 \n" /* counter-- */
" scond %[val], [%[rwlock]] \n"
" bz.d 4f \n"
" mov.z %[got_it], 1 \n" /* got it */
" \n"
SCOND_FAIL_RETRY_ASM
: [val] "=&r" (val),
[got_it] "+&r" (got_it)
SCOND_FAIL_RETRY_VARS
: [rwlock] "r" (&(rw->counter)),
[WR_LOCKED] "ir" (0)
: "memory", "cc");
smp_mb();
return got_it;
}
static inline void arch_write_lock(arch_rwlock_t *rw)
{
unsigned int val;
SCOND_FAIL_RETRY_VAR_DEF;
smp_mb();
/*
* If reader(s) hold lock (lock < __ARCH_RW_LOCK_UNLOCKED__),
* deny writer. Otherwise if unlocked grant to writer
* Hence the claim that Linux rwlocks are unfair to writers.
* (can be starved for an indefinite time by readers).
*
* if (rw->counter == __ARCH_RW_LOCK_UNLOCKED__) {
* rw->counter = 0;
* ret = 1;
* }
*/
__asm__ __volatile__(
"0: mov %[delay], 1 \n"
"1: llock %[val], [%[rwlock]] \n"
" brne %[val], %[UNLOCKED], 0b \n" /* while !UNLOCKED spin */
" mov %[val], %[WR_LOCKED] \n"
" scond %[val], [%[rwlock]] \n"
" bz 4f \n"
" \n"
SCOND_FAIL_RETRY_ASM
: [val] "=&r" (val)
SCOND_FAIL_RETRY_VARS
: [rwlock] "r" (&(rw->counter)),
[UNLOCKED] "ir" (__ARCH_RW_LOCK_UNLOCKED__),
[WR_LOCKED] "ir" (0)
: "memory", "cc");
smp_mb();
}
/* 1 - lock taken successfully */
static inline int arch_write_trylock(arch_rwlock_t *rw)
{
unsigned int val, got_it = 0;
SCOND_FAIL_RETRY_VAR_DEF;
smp_mb();
__asm__ __volatile__(
"0: mov %[delay], 1 \n"
"1: llock %[val], [%[rwlock]] \n"
" brne %[val], %[UNLOCKED], 4f \n" /* !UNLOCKED, bail */
" mov %[val], %[WR_LOCKED] \n"
" scond %[val], [%[rwlock]] \n"
" bz.d 4f \n"
" mov.z %[got_it], 1 \n" /* got it */
" \n"
SCOND_FAIL_RETRY_ASM
: [val] "=&r" (val),
[got_it] "+&r" (got_it)
SCOND_FAIL_RETRY_VARS
: [rwlock] "r" (&(rw->counter)),
[UNLOCKED] "ir" (__ARCH_RW_LOCK_UNLOCKED__),
[WR_LOCKED] "ir" (0)
: "memory", "cc");
smp_mb();
return got_it;
}
static inline void arch_read_unlock(arch_rwlock_t *rw)
{
unsigned int val;
smp_mb();
/*
* rw->counter++;
*/
__asm__ __volatile__(
"1: llock %[val], [%[rwlock]] \n"
" add %[val], %[val], 1 \n"
" scond %[val], [%[rwlock]] \n"
" bnz 1b \n"
" \n"
: [val] "=&r" (val)
: [rwlock] "r" (&(rw->counter))
: "memory", "cc");
smp_mb();
}
static inline void arch_write_unlock(arch_rwlock_t *rw)
{
unsigned int val;
smp_mb();
/*
* rw->counter = __ARCH_RW_LOCK_UNLOCKED__;
*/
__asm__ __volatile__(
"1: llock %[val], [%[rwlock]] \n"
" scond %[UNLOCKED], [%[rwlock]]\n"
" bnz 1b \n"
" \n"
: [val] "=&r" (val)
: [rwlock] "r" (&(rw->counter)),
[UNLOCKED] "r" (__ARCH_RW_LOCK_UNLOCKED__)
: "memory", "cc");
smp_mb();
}
#undef SCOND_FAIL_RETRY_VAR_DEF
#undef SCOND_FAIL_RETRY_ASM
#undef SCOND_FAIL_RETRY_VARS
#endif /* CONFIG_ARC_STAR_9000923308 */
#else /* !CONFIG_ARC_HAS_LLSC */
static inline void arch_spin_lock(arch_spinlock_t *lock)
{
unsigned int val = __ARCH_SPIN_LOCK_LOCKED__;
/*
* This smp_mb() is technically superfluous, we only need the one
@ -33,7 +542,7 @@ static inline void arch_spin_lock(arch_spinlock_t *lock)
__asm__ __volatile__(
"1: ex %0, [%1] \n"
" breq %0, %2, 1b \n"
: "+&r" (tmp)
: "+&r" (val)
: "r"(&(lock->slock)), "ir"(__ARCH_SPIN_LOCK_LOCKED__)
: "memory");
@ -48,26 +557,27 @@ static inline void arch_spin_lock(arch_spinlock_t *lock)
smp_mb();
}
/* 1 - lock taken successfully */
static inline int arch_spin_trylock(arch_spinlock_t *lock)
{
unsigned int tmp = __ARCH_SPIN_LOCK_LOCKED__;
unsigned int val = __ARCH_SPIN_LOCK_LOCKED__;
smp_mb();
__asm__ __volatile__(
"1: ex %0, [%1] \n"
: "+r" (tmp)
: "+r" (val)
: "r"(&(lock->slock))
: "memory");
smp_mb();
return (tmp == __ARCH_SPIN_LOCK_UNLOCKED__);
return (val == __ARCH_SPIN_LOCK_UNLOCKED__);
}
static inline void arch_spin_unlock(arch_spinlock_t *lock)
{
unsigned int tmp = __ARCH_SPIN_LOCK_UNLOCKED__;
unsigned int val = __ARCH_SPIN_LOCK_UNLOCKED__;
/*
* RELEASE barrier: given the instructions avail on ARCv2, full barrier
@ -77,7 +587,7 @@ static inline void arch_spin_unlock(arch_spinlock_t *lock)
__asm__ __volatile__(
" ex %0, [%1] \n"
: "+r" (tmp)
: "+r" (val)
: "r"(&(lock->slock))
: "memory");
@ -90,19 +600,12 @@ static inline void arch_spin_unlock(arch_spinlock_t *lock)
/*
* Read-write spinlocks, allowing multiple readers but only one writer.
* Unfair locking as Writers could be starved indefinitely by Reader(s)
*
* The spinlock itself is contained in @counter and access to it is
* serialized with @lock_mutex.
*
* Unfair locking as Writers could be starved indefinitely by Reader(s)
*/
/* Would read_trylock() succeed? */
#define arch_read_can_lock(x) ((x)->counter > 0)
/* Would write_trylock() succeed? */
#define arch_write_can_lock(x) ((x)->counter == __ARCH_RW_LOCK_UNLOCKED__)
/* 1 - lock taken successfully */
static inline int arch_read_trylock(arch_rwlock_t *rw)
{
@ -173,6 +676,11 @@ static inline void arch_write_unlock(arch_rwlock_t *rw)
arch_spin_unlock(&(rw->lock_mutex));
}
#endif
#define arch_read_can_lock(x) ((x)->counter > 0)
#define arch_write_can_lock(x) ((x)->counter == __ARCH_RW_LOCK_UNLOCKED__)
#define arch_read_lock_flags(lock, flags) arch_read_lock(lock)
#define arch_write_lock_flags(lock, flags) arch_write_lock(lock)

2
arch/arc/include/asm/spinlock_types.h
View file

@ -26,7 +26,9 @@ typedef struct {
*/
typedef struct {
volatile unsigned int counter;
#ifndef CONFIG_ARC_HAS_LLSC
arch_spinlock_t lock_mutex;
#endif
} arch_rwlock_t;
#define __ARCH_RW_LOCK_UNLOCKED__ 0x01000000

20
arch/arc/include/uapi/asm/ptrace.h
View file

@ -32,20 +32,20 @@
*/
struct user_regs_struct {
long pad;
unsigned long pad;
struct {
long bta, lp_start, lp_end, lp_count;
long status32, ret, blink, fp, gp;
long r12, r11, r10, r9, r8, r7, r6, r5, r4, r3, r2, r1, r0;
long sp;
unsigned long bta, lp_start, lp_end, lp_count;
unsigned long status32, ret, blink, fp, gp;
unsigned long r12, r11, r10, r9, r8, r7, r6, r5, r4, r3, r2, r1, r0;
unsigned long sp;
} scratch;
long pad2;
unsigned long pad2;
struct {
long r25, r24, r23, r22, r21, r20;
long r19, r18, r17, r16, r15, r14, r13;
unsigned long r25, r24, r23, r22, r21, r20;
unsigned long r19, r18, r17, r16, r15, r14, r13;
} callee;
long efa; /* break pt addr, for break points in delay slots */
long stop_pc; /* give dbg stop_pc after ensuring brkpt trap */
unsigned long efa; /* break pt addr, for break points in delay slots */
unsigned long stop_pc; /* give dbg stop_pc after ensuring brkpt trap */
};
#endif /* !__ASSEMBLY__ */

12
arch/arc/kernel/setup.c
View file

@ -47,6 +47,7 @@ static void read_arc_build_cfg_regs(void)
struct bcr_perip uncached_space;
struct bcr_generic bcr;
struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
unsigned long perip_space;
FIX_PTR(cpu);
READ_BCR(AUX_IDENTITY, cpu->core);
@ -56,7 +57,12 @@ static void read_arc_build_cfg_regs(void)
cpu->vec_base = read_aux_reg(AUX_INTR_VEC_BASE);
READ_BCR(ARC_REG_D_UNCACH_BCR, uncached_space);
BUG_ON((uncached_space.start << 24) != ARC_UNCACHED_ADDR_SPACE);
if (uncached_space.ver < 3)
perip_space = uncached_space.start << 24;
else
perip_space = read_aux_reg(AUX_NON_VOL) & 0xF0000000;
BUG_ON(perip_space != ARC_UNCACHED_ADDR_SPACE);
READ_BCR(ARC_REG_MUL_BCR, cpu->extn_mpy);
@ -330,6 +336,10 @@ static void arc_chk_core_config(void)
pr_warn("CONFIG_ARC_FPU_SAVE_RESTORE needed for working apps\n");
else if (!cpu->extn.fpu_dp && fpu_enabled)
panic("FPU non-existent, disable CONFIG_ARC_FPU_SAVE_RESTORE\n");
if (is_isa_arcv2() && IS_ENABLED(CONFIG_SMP) && cpu->isa.atomic &&
!IS_ENABLED(CONFIG_ARC_STAR_9000923308))
panic("llock/scond livelock workaround missing\n");
}
/*

40
arch/arc/kernel/time.c
View file

@ -203,34 +203,24 @@ static int arc_clkevent_set_next_event(unsigned long delta,
return 0;
}
static void arc_clkevent_set_mode(enum clock_event_mode mode,
struct clock_event_device *dev)
static int arc_clkevent_set_periodic(struct clock_event_device *dev)
{
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
/*
* At X Hz, 1 sec = 1000ms -> X cycles;
* 10ms -> X / 100 cycles
*/
arc_timer_event_setup(arc_get_core_freq() / HZ);
break;
case CLOCK_EVT_MODE_ONESHOT:
break;
default:
break;
}
return;
/*
* At X Hz, 1 sec = 1000ms -> X cycles;
* 10ms -> X / 100 cycles
*/
arc_timer_event_setup(arc_get_core_freq() / HZ);
return 0;
}
static DEFINE_PER_CPU(struct clock_event_device, arc_clockevent_device) = {
.name = "ARC Timer0",
.features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
.mode = CLOCK_EVT_MODE_UNUSED,
.rating = 300,
.irq = TIMER0_IRQ, /* hardwired, no need for resources */
.set_next_event = arc_clkevent_set_next_event,
.set_mode = arc_clkevent_set_mode,
.name = "ARC Timer0",
.features = CLOCK_EVT_FEAT_ONESHOT |
CLOCK_EVT_FEAT_PERIODIC,
.rating = 300,
.irq = TIMER0_IRQ, /* hardwired, no need for resources */
.set_next_event = arc_clkevent_set_next_event,
.set_state_periodic = arc_clkevent_set_periodic,
};
static irqreturn_t timer_irq_handler(int irq, void *dev_id)
@ -240,7 +230,7 @@ static irqreturn_t timer_irq_handler(int irq, void *dev_id)
* irq_set_chip_and_handler() asked for handle_percpu_devid_irq()
*/
struct clock_event_device *evt = this_cpu_ptr(&arc_clockevent_device);
int irq_reenable = evt->mode == CLOCK_EVT_MODE_PERIODIC;
int irq_reenable = clockevent_state_periodic(evt);
/*
* Any write to CTRL reg ACks the interrupt, we rewrite the

2
arch/arc/lib/memcpy-archs.S
View file

@ -206,7 +206,7 @@ unalignedOffby3:
ld.ab r6, [r1, 4]
prefetch [r1, 28] ;Prefetch the next read location
ld.ab r8, [r1,4]
prefetch [r3, 32] ;Prefetch the next write location
prefetchw [r3, 32] ;Prefetch the next write location
SHIFT_1 (r7, r6, 8)
or r7, r7, r5

43
arch/arc/lib/memset-archs.S
View file

@ -10,12 +10,6 @@
#undef PREALLOC_NOT_AVAIL
#ifdef PREALLOC_NOT_AVAIL
#define PREWRITE(A,B) prefetchw [(A),(B)]
#else
#define PREWRITE(A,B) prealloc [(A),(B)]
#endif
ENTRY(memset)
prefetchw [r0] ; Prefetch the write location
mov.f 0, r2
@ -51,9 +45,15 @@ ENTRY(memset)
;;; Convert len to Dwords, unfold x8
lsr.f lp_count, lp_count, 6
lpnz @.Lset64bytes
;; LOOP START
PREWRITE(r3, 64) ;Prefetch the next write location
#ifdef PREALLOC_NOT_AVAIL
prefetchw [r3, 64] ;Prefetch the next write location
#else
prealloc [r3, 64]
#endif
#ifdef CONFIG_ARC_HAS_LL64
std.ab r4, [r3, 8]
std.ab r4, [r3, 8]
std.ab r4, [r3, 8]
@ -62,16 +62,45 @@ ENTRY(memset)
std.ab r4, [r3, 8]
std.ab r4, [r3, 8]
std.ab r4, [r3, 8]
#else
st.ab r4, [r3, 4]
st.ab r4, [r3, 4]
st.ab r4, [r3, 4]
st.ab r4, [r3, 4]
st.ab r4, [r3, 4]
st.ab r4, [r3, 4]
st.ab r4, [r3, 4]
st.ab r4, [r3, 4]
st.ab r4, [r3, 4]
st.ab r4, [r3, 4]
st.ab r4, [r3, 4]
st.ab r4, [r3, 4]
st.ab r4, [r3, 4]
st.ab r4, [r3, 4]
st.ab r4, [r3, 4]
st.ab r4, [r3, 4]
#endif
.Lset64bytes:
lsr.f lp_count, r2, 5 ;Last remaining max 124 bytes
lpnz .Lset32bytes
;; LOOP START
prefetchw [r3, 32] ;Prefetch the next write location
#ifdef CONFIG_ARC_HAS_LL64
std.ab r4, [r3, 8]
std.ab r4, [r3, 8]
std.ab r4, [r3, 8]
std.ab r4, [r3, 8]
#else
st.ab r4, [r3, 4]
st.ab r4, [r3, 4]
st.ab r4, [r3, 4]
st.ab r4, [r3, 4]
st.ab r4, [r3, 4]
st.ab r4, [r3, 4]
st.ab r4, [r3, 4]
st.ab r4, [r3, 4]
#endif
.Lset32bytes:
and.f lp_count, r2, 0x1F ;Last remaining 31 bytes

15
arch/arc/plat-axs10x/axs10x.c
View file

@ -389,6 +389,21 @@ axs103_set_freq(unsigned int id, unsigned int fd, unsigned int od)
static void __init axs103_early_init(void)
{
/*
* AXS103 configurations for SMP/QUAD configurations share device tree
* which defaults to 90 MHz. However recent failures of Quad config
* revealed P&R timing violations so clamp it down to safe 50 MHz
* Instead of duplicating defconfig/DT for SMP/QUAD, add a small hack
*
* This hack is really hacky as of now. Fix it properly by getting the
* number of cores as return value of platform's early SMP callback
*/
#ifdef CONFIG_ARC_MCIP
unsigned int num_cores = (read_aux_reg(ARC_REG_MCIP_BCR) >> 16) & 0x3F;
if (num_cores > 2)
arc_set_core_freq(50 * 1000000);
#endif
switch (arc_get_core_freq()/1000000) {
case 33:
axs103_set_freq(1, 1, 1);

1
arch/arm/boot/dts/dra7.dtsi
View file

@ -1140,6 +1140,7 @@
ctrl-module = <&omap_control_sata>;
clocks = <&sys_clkin1>, <&sata_ref_clk>;
clock-names = "sysclk", "refclk";
syscon-pllreset = <&scm_conf 0x3fc>;
#phy-cells = <0>;
};

2
arch/arm/boot/dts/exynos3250.dtsi
View file

@ -138,8 +138,8 @@
mipi_phy: video-phy@10020710 {
compatible = "samsung,s5pv210-mipi-video-phy";
reg = <0x10020710 8>;
#phy-cells = <1>;
syscon = <&pmu_system_controller>;
};
pd_cam: cam-power-domain@10023C00 {

Some files were not shown because too many files have changed in this diff Show more