ARM: More device tree support updates
This branch contains a number of updates for device tree support on
several ARM platforms, in particular:
* AT91 continues the device tree conversion adding support for a number of
on-chip drivers and other functionality
* ux500 adds probing of some of the core SoC blocks through device tree
* Initial device tree support for ST SPEAr600 platforms
* kirkwood continues the conversion to device-tree probing
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=wiKV
-----END PGP SIGNATURE-----
Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull "ARM: More device tree support updates" from Olof Johansson:
"This branch contains a number of updates for device tree support on
several ARM platforms, in particular:
* AT91 continues the device tree conversion adding support for a
number of on-chip drivers and other functionality
* ux500 adds probing of some of the core SoC blocks through device
tree
* Initial device tree support for ST SPEAr600 platforms
* kirkwood continues the conversion to device-tree probing"
Manually merge arch/arm/mach-ux500/Kconfig due to MACH_U8500 rename, and
drivers/usb/gadget/at91_udc.c due to header file include cleanups.
Also do an "evil merge" for the MACH_U8500 config option rename that the
affected RMI4 touchscreen driver in staging. It's called MACH_MOP500
now, and it was missed during previous merges.
* tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
ARM: SPEAr600: Add device-tree support to SPEAr600 boards
ARM: ux500: Provide local timer support for Device Tree
ARM: ux500: Enable PL022 SSP Controller in Device Tree
ARM: ux500: Enable PL310 Level 2 Cache Controller in Device Tree
ARM: ux500: Enable PL011 AMBA UART Controller for Device Tree
ARM: ux500: Enable Cortex-A9 GIC (Generic Interrupt Controller) in Device Tree
ARM: ux500: db8500: list most devices in the snowball device tree
ARM: ux500: split dts file for snowball into generic part
ARM: ux500: combine the board init functions for DT boot
ARM: ux500: Initial Device Tree support for Snowball
ARM: ux500: CONFIG: Enable Device Tree support for future endeavours
ARM: kirkwood: use devicetree for rtc-mv
ARM: kirkwood: rtc-mv devicetree bindings
ARM: kirkwood: fdt: define uart[01] as disabled, enable uart0
ARM: kirkwood: fdt: facilitate new boards during fdt migration
ARM: kirkwood: fdt: absorb kirkwood_init()
ARM: kirkwood: fdt: use mrvl ticker symbol
ARM: orion: wdt: use resource vice direct access
ARM: Kirkwood: Remove tclk from kirkwood_asoc_platform_data.
ARM: orion: spi: remove enable_clock_fix which is not used
...
This commit is contained in:
Linus Torvalds
commit
09893ee845
96 changed files with 2536 additions and 555 deletions
|
|
@ -30,3 +30,63 @@ One interrupt per TC channel in a TC block:
|
|||
reg = <0xfffdc000 0x100>;
|
||||
interrupts = <26 4 27 4 28 4>;
|
||||
};
|
||||
|
||||
RSTC Reset Controller required properties:
|
||||
- compatible: Should be "atmel,<chip>-rstc".
|
||||
<chip> can be "at91sam9260" or "at91sam9g45"
|
||||
- reg: Should contain registers location and length
|
||||
|
||||
Example:
|
||||
|
||||
rstc@fffffd00 {
|
||||
compatible = "atmel,at91sam9260-rstc";
|
||||
reg = <0xfffffd00 0x10>;
|
||||
};
|
||||
|
||||
RAMC SDRAM/DDR Controller required properties:
|
||||
- compatible: Should be "atmel,at91sam9260-sdramc",
|
||||
"atmel,at91sam9g45-ddramc",
|
||||
- reg: Should contain registers location and length
|
||||
For at91sam9263 and at91sam9g45 you must specify 2 entries.
|
||||
|
||||
Examples:
|
||||
|
||||
ramc0: ramc@ffffe800 {
|
||||
compatible = "atmel,at91sam9g45-ddramc";
|
||||
reg = <0xffffe800 0x200>;
|
||||
};
|
||||
|
||||
ramc0: ramc@ffffe400 {
|
||||
compatible = "atmel,at91sam9g45-ddramc";
|
||||
reg = <0xffffe400 0x200
|
||||
0xffffe600 0x200>;
|
||||
};
|
||||
|
||||
SHDWC Shutdown Controller
|
||||
|
||||
required properties:
|
||||
- compatible: Should be "atmel,<chip>-shdwc".
|
||||
<chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5".
|
||||
- reg: Should contain registers location and length
|
||||
|
||||
optional properties:
|
||||
- atmel,wakeup-mode: String, operation mode of the wakeup mode.
|
||||
Supported values are: "none", "high", "low", "any".
|
||||
- atmel,wakeup-counter: Counter on Wake-up 0 (between 0x0 and 0xf).
|
||||
|
||||
optional at91sam9260 properties:
|
||||
- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
|
||||
|
||||
optional at91sam9rl properties:
|
||||
- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
|
||||
- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
|
||||
|
||||
optional at91sam9x5 properties:
|
||||
- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
|
||||
|
||||
Example:
|
||||
|
||||
rstc@fffffd00 {
|
||||
compatible = "atmel,at91sam9260-rstc";
|
||||
reg = <0xfffffd00 0x10>;
|
||||
};
|
||||
|
|
|
|||
11
Documentation/devicetree/bindings/arm/atmel-pmc.txt
Normal file
11
Documentation/devicetree/bindings/arm/atmel-pmc.txt
Normal file
|
|
@ -0,0 +1,11 @@
|
|||
* Power Management Controller (PMC)
|
||||
|
||||
Required properties:
|
||||
- compatible: Should be "atmel,at91rm9200-pmc"
|
||||
- reg: Should contain PMC registers location and length
|
||||
|
||||
Examples:
|
||||
pmc: pmc@fffffc00 {
|
||||
compatible = "atmel,at91rm9200-pmc";
|
||||
reg = <0xfffffc00 0x100>;
|
||||
};
|
||||
8
Documentation/devicetree/bindings/arm/spear.txt
Normal file
8
Documentation/devicetree/bindings/arm/spear.txt
Normal file
|
|
@ -0,0 +1,8 @@
|
|||
ST SPEAr Platforms Device Tree Bindings
|
||||
---------------------------------------
|
||||
|
||||
Boards with the ST SPEAr600 SoC shall have the following properties:
|
||||
|
||||
Required root node property:
|
||||
|
||||
compatible = "st,spear600";
|
||||
32
Documentation/devicetree/bindings/gpio/gpio_i2c.txt
Normal file
32
Documentation/devicetree/bindings/gpio/gpio_i2c.txt
Normal file
|
|
@ -0,0 +1,32 @@
|
|||
Device-Tree bindings for i2c gpio driver
|
||||
|
||||
Required properties:
|
||||
- compatible = "i2c-gpio";
|
||||
- gpios: sda and scl gpio
|
||||
|
||||
|
||||
Optional properties:
|
||||
- i2c-gpio,sda-open-drain: sda as open drain
|
||||
- i2c-gpio,scl-open-drain: scl as open drain
|
||||
- i2c-gpio,scl-output-only: scl as output only
|
||||
- i2c-gpio,delay-us: delay between GPIO operations (may depend on each platform)
|
||||
- i2c-gpio,timeout-ms: timeout to get data
|
||||
|
||||
Example nodes:
|
||||
|
||||
i2c@0 {
|
||||
compatible = "i2c-gpio";
|
||||
gpios = <&pioA 23 0 /* sda */
|
||||
&pioA 24 0 /* scl */
|
||||
>;
|
||||
i2c-gpio,sda-open-drain;
|
||||
i2c-gpio,scl-open-drain;
|
||||
i2c-gpio,delay-us = <2>; /* ~100 kHz */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
rv3029c2@56 {
|
||||
compatible = "rv3029c2";
|
||||
reg = <0x56>;
|
||||
};
|
||||
};
|
||||
41
Documentation/devicetree/bindings/mtd/atmel-nand.txt
Normal file
41
Documentation/devicetree/bindings/mtd/atmel-nand.txt
Normal file
|
|
@ -0,0 +1,41 @@
|
|||
Atmel NAND flash
|
||||
|
||||
Required properties:
|
||||
- compatible : "atmel,at91rm9200-nand".
|
||||
- reg : should specify localbus address and size used for the chip,
|
||||
and if availlable the ECC.
|
||||
- atmel,nand-addr-offset : offset for the address latch.
|
||||
- atmel,nand-cmd-offset : offset for the command latch.
|
||||
- #address-cells, #size-cells : Must be present if the device has sub-nodes
|
||||
representing partitions.
|
||||
|
||||
- gpios : specifies the gpio pins to control the NAND device. detect is an
|
||||
optional gpio and may be set to 0 if not present.
|
||||
|
||||
Optional properties:
|
||||
- nand-ecc-mode : String, operation mode of the NAND ecc mode, soft by default.
|
||||
Supported values are: "none", "soft", "hw", "hw_syndrome", "hw_oob_first",
|
||||
"soft_bch".
|
||||
- nand-bus-width : 8 or 16 bus width if not present 8
|
||||
- nand-on-flash-bbt: boolean to enable on flash bbt option if not present false
|
||||
|
||||
Examples:
|
||||
nand0: nand@40000000,0 {
|
||||
compatible = "atmel,at91rm9200-nand";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0x40000000 0x10000000
|
||||
0xffffe800 0x200
|
||||
>;
|
||||
atmel,nand-addr-offset = <21>;
|
||||
atmel,nand-cmd-offset = <22>;
|
||||
nand-on-flash-bbt;
|
||||
nand-ecc-mode = "soft";
|
||||
gpios = <&pioC 13 0
|
||||
&pioC 14 0
|
||||
0
|
||||
>;
|
||||
partition@0 {
|
||||
...
|
||||
};
|
||||
};
|
||||
7
Documentation/devicetree/bindings/mtd/nand.txt
Normal file
7
Documentation/devicetree/bindings/mtd/nand.txt
Normal file
|
|
@ -0,0 +1,7 @@
|
|||
* MTD generic binding
|
||||
|
||||
- nand-ecc-mode : String, operation mode of the NAND ecc mode.
|
||||
Supported values are: "none", "soft", "hw", "hw_syndrome", "hw_oob_first",
|
||||
"soft_bch".
|
||||
- nand-bus-width : 8 or 16 bus width if not present 8
|
||||
- nand-on-flash-bbt: boolean to enable on flash bbt option if not present false
|
||||
49
Documentation/devicetree/bindings/usb/atmel-usb.txt
Normal file
49
Documentation/devicetree/bindings/usb/atmel-usb.txt
Normal file
|
|
@ -0,0 +1,49 @@
|
|||
Atmel SOC USB controllers
|
||||
|
||||
OHCI
|
||||
|
||||
Required properties:
|
||||
- compatible: Should be "atmel,at91rm9200-ohci" for USB controllers
|
||||
used in host mode.
|
||||
- num-ports: Number of ports.
|
||||
- atmel,vbus-gpio: If present, specifies a gpio that needs to be
|
||||
activated for the bus to be powered.
|
||||
- atmel,oc-gpio: If present, specifies a gpio that needs to be
|
||||
activated for the overcurrent detection.
|
||||
|
||||
usb0: ohci@00500000 {
|
||||
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
|
||||
reg = <0x00500000 0x100000>;
|
||||
interrupts = <20 4>;
|
||||
num-ports = <2>;
|
||||
};
|
||||
|
||||
EHCI
|
||||
|
||||
Required properties:
|
||||
- compatible: Should be "atmel,at91sam9g45-ehci" for USB controllers
|
||||
used in host mode.
|
||||
|
||||
usb1: ehci@00800000 {
|
||||
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
|
||||
reg = <0x00800000 0x100000>;
|
||||
interrupts = <22 4>;
|
||||
};
|
||||
|
||||
AT91 USB device controller
|
||||
|
||||
Required properties:
|
||||
- compatible: Should be "atmel,at91rm9200-udc"
|
||||
- reg: Address and length of the register set for the device
|
||||
- interrupts: Should contain macb interrupt
|
||||
|
||||
Optional properties:
|
||||
- atmel,vbus-gpio: If present, specifies a gpio that needs to be
|
||||
activated for the bus to be powered.
|
||||
|
||||
usb1: gadget@fffa4000 {
|
||||
compatible = "atmel,at91rm9200-udc";
|
||||
reg = <0xfffa4000 0x4000>;
|
||||
interrupts = <10 4>;
|
||||
atmel,vbus-gpio = <&pioC 5 0>;
|
||||
};
|
||||
|
|
@ -11,3 +11,16 @@ Required properties :
|
|||
- phy_type : Should be one of "ulpi" or "utmi".
|
||||
- nvidia,vbus-gpio : If present, specifies a gpio that needs to be
|
||||
activated for the bus to be powered.
|
||||
|
||||
Optional properties:
|
||||
- dr_mode : dual role mode. Indicates the working mode for
|
||||
nvidia,tegra20-ehci compatible controllers. Can be "host", "peripheral",
|
||||
or "otg". Default to "host" if not defined for backward compatibility.
|
||||
host means this is a host controller
|
||||
peripheral means it is device controller
|
||||
otg means it can operate as either ("on the go")
|
||||
- nvidia,has-legacy-mode : boolean indicates whether this controller can
|
||||
operate in legacy mode (as APX 2500 / 2600). In legacy mode some
|
||||
registers are accessed through the APB_MISC base address instead of
|
||||
the USB controller. Since this is a legacy issue it probably does not
|
||||
warrant a compatible string of its own.
|
||||
|
|
|
|||
|
|
@ -59,6 +59,26 @@
|
|||
reg = <0xfffff000 0x200>;
|
||||
};
|
||||
|
||||
ramc0: ramc@ffffea00 {
|
||||
compatible = "atmel,at91sam9260-sdramc";
|
||||
reg = <0xffffea00 0x200>;
|
||||
};
|
||||
|
||||
pmc: pmc@fffffc00 {
|
||||
compatible = "atmel,at91rm9200-pmc";
|
||||
reg = <0xfffffc00 0x100>;
|
||||
};
|
||||
|
||||
rstc@fffffd00 {
|
||||
compatible = "atmel,at91sam9260-rstc";
|
||||
reg = <0xfffffd00 0x10>;
|
||||
};
|
||||
|
||||
shdwc@fffffd10 {
|
||||
compatible = "atmel,at91sam9260-shdwc";
|
||||
reg = <0xfffffd10 0x10>;
|
||||
};
|
||||
|
||||
pit: timer@fffffd30 {
|
||||
compatible = "atmel,at91sam9260-pit";
|
||||
reg = <0xfffffd30 0xf>;
|
||||
|
|
@ -171,6 +191,49 @@
|
|||
interrupts = <21 4>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb1: gadget@fffa4000 {
|
||||
compatible = "atmel,at91rm9200-udc";
|
||||
reg = <0xfffa4000 0x4000>;
|
||||
interrupts = <10 4>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
nand0: nand@40000000 {
|
||||
compatible = "atmel,at91rm9200-nand";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0x40000000 0x10000000
|
||||
0xffffe800 0x200
|
||||
>;
|
||||
atmel,nand-addr-offset = <21>;
|
||||
atmel,nand-cmd-offset = <22>;
|
||||
gpios = <&pioC 13 0
|
||||
&pioC 14 0
|
||||
0
|
||||
>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb0: ohci@00500000 {
|
||||
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
|
||||
reg = <0x00500000 0x100000>;
|
||||
interrupts = <20 4>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
i2c@0 {
|
||||
compatible = "i2c-gpio";
|
||||
gpios = <&pioA 23 0 /* sda */
|
||||
&pioA 24 0 /* scl */
|
||||
>;
|
||||
i2c-gpio,sda-open-drain;
|
||||
i2c-gpio,scl-open-drain;
|
||||
i2c-gpio,delay-us = <2>; /* ~100 kHz */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -15,7 +15,7 @@
|
|||
compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
|
||||
|
||||
chosen {
|
||||
bootargs = "128M console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)ro,-(rootfs) root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
|
||||
bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
|
||||
};
|
||||
|
||||
ahb {
|
||||
|
|
@ -33,5 +33,17 @@
|
|||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
usb0: ohci@00600000 {
|
||||
status = "okay";
|
||||
num-ports = <2>;
|
||||
atmel,vbus-gpio = <&pioD 19 0
|
||||
&pioD 20 0
|
||||
>;
|
||||
};
|
||||
|
||||
usb1: ehci@00700000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -60,6 +60,22 @@
|
|||
reg = <0xfffff000 0x200>;
|
||||
};
|
||||
|
||||
ramc0: ramc@ffffe400 {
|
||||
compatible = "atmel,at91sam9g45-ddramc";
|
||||
reg = <0xffffe400 0x200
|
||||
0xffffe600 0x200>;
|
||||
};
|
||||
|
||||
pmc: pmc@fffffc00 {
|
||||
compatible = "atmel,at91rm9200-pmc";
|
||||
reg = <0xfffffc00 0x100>;
|
||||
};
|
||||
|
||||
rstc@fffffd00 {
|
||||
compatible = "atmel,at91sam9g45-rstc";
|
||||
reg = <0xfffffd00 0x10>;
|
||||
};
|
||||
|
||||
pit: timer@fffffd30 {
|
||||
compatible = "atmel,at91sam9260-pit";
|
||||
reg = <0xfffffd30 0xf>;
|
||||
|
|
@ -67,6 +83,11 @@
|
|||
};
|
||||
|
||||
|
||||
shdwc@fffffd10 {
|
||||
compatible = "atmel,at91sam9rl-shdwc";
|
||||
reg = <0xfffffd10 0x10>;
|
||||
};
|
||||
|
||||
tcb0: timer@fff7c000 {
|
||||
compatible = "atmel,at91rm9200-tcb";
|
||||
reg = <0xfff7c000 0x100>;
|
||||
|
|
@ -180,5 +201,48 @@
|
|||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
nand0: nand@40000000 {
|
||||
compatible = "atmel,at91rm9200-nand";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0x40000000 0x10000000
|
||||
0xffffe200 0x200
|
||||
>;
|
||||
atmel,nand-addr-offset = <21>;
|
||||
atmel,nand-cmd-offset = <22>;
|
||||
gpios = <&pioC 8 0
|
||||
&pioC 14 0
|
||||
0
|
||||
>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb0: ohci@00700000 {
|
||||
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
|
||||
reg = <0x00700000 0x100000>;
|
||||
interrupts = <22 4>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb1: ehci@00800000 {
|
||||
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
|
||||
reg = <0x00800000 0x100000>;
|
||||
interrupts = <22 4>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
i2c@0 {
|
||||
compatible = "i2c-gpio";
|
||||
gpios = <&pioA 20 0 /* sda */
|
||||
&pioA 21 0 /* scl */
|
||||
>;
|
||||
i2c-gpio,sda-open-drain;
|
||||
i2c-gpio,scl-open-drain;
|
||||
i2c-gpio,delay-us = <5>; /* ~100 kHz */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -14,13 +14,24 @@
|
|||
compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9";
|
||||
|
||||
chosen {
|
||||
bootargs = "mem=64M console=ttyS0,115200 mtdparts=atmel_nand:4M(bootstrap/uboot/kernel)ro,60M(rootfs),-(data) root=/dev/mtdblock1 rw rootfstype=jffs2";
|
||||
bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2";
|
||||
};
|
||||
|
||||
memory@70000000 {
|
||||
reg = <0x70000000 0x4000000>;
|
||||
};
|
||||
|
||||
clocks {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
main_clock: clock@0 {
|
||||
compatible = "atmel,osc", "fixed-clock";
|
||||
clock-frequency = <12000000>;
|
||||
};
|
||||
};
|
||||
|
||||
ahb {
|
||||
apb {
|
||||
dbgu: serial@ffffee00 {
|
||||
|
|
@ -36,6 +47,39 @@
|
|||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
nand0: nand@40000000 {
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-mode = "soft";
|
||||
nand-on-flash-bbt;
|
||||
status = "okay";
|
||||
|
||||
boot@0 {
|
||||
label = "bootstrap/uboot/kernel";
|
||||
reg = <0x0 0x400000>;
|
||||
};
|
||||
|
||||
rootfs@400000 {
|
||||
label = "rootfs";
|
||||
reg = <0x400000 0x3C00000>;
|
||||
};
|
||||
|
||||
data@4000000 {
|
||||
label = "data";
|
||||
reg = <0x4000000 0xC000000>;
|
||||
};
|
||||
};
|
||||
|
||||
usb0: ohci@00700000 {
|
||||
status = "okay";
|
||||
num-ports = <2>;
|
||||
atmel,vbus-gpio = <&pioD 1 0
|
||||
&pioD 3 0>;
|
||||
};
|
||||
|
||||
usb1: ehci@00800000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
|
|
|
|||
|
|
@ -58,6 +58,26 @@
|
|||
reg = <0xfffff000 0x200>;
|
||||
};
|
||||
|
||||
ramc0: ramc@ffffe800 {
|
||||
compatible = "atmel,at91sam9g45-ddramc";
|
||||
reg = <0xffffe800 0x200>;
|
||||
};
|
||||
|
||||
pmc: pmc@fffffc00 {
|
||||
compatible = "atmel,at91rm9200-pmc";
|
||||
reg = <0xfffffc00 0x100>;
|
||||
};
|
||||
|
||||
rstc@fffffe00 {
|
||||
compatible = "atmel,at91sam9g45-rstc";
|
||||
reg = <0xfffffe00 0x10>;
|
||||
};
|
||||
|
||||
shdwc@fffffe10 {
|
||||
compatible = "atmel,at91sam9x5-shdwc";
|
||||
reg = <0xfffffe10 0x10>;
|
||||
};
|
||||
|
||||
pit: timer@fffffe30 {
|
||||
compatible = "atmel,at91sam9260-pit";
|
||||
reg = <0xfffffe30 0xf>;
|
||||
|
|
@ -172,5 +192,73 @@
|
|||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
nand0: nand@40000000 {
|
||||
compatible = "atmel,at91rm9200-nand";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0x40000000 0x10000000
|
||||
>;
|
||||
atmel,nand-addr-offset = <21>;
|
||||
atmel,nand-cmd-offset = <22>;
|
||||
gpios = <&pioC 8 0
|
||||
&pioC 14 0
|
||||
0
|
||||
>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb0: ohci@00600000 {
|
||||
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
|
||||
reg = <0x00600000 0x100000>;
|
||||
interrupts = <22 4>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb1: ehci@00700000 {
|
||||
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
|
||||
reg = <0x00700000 0x100000>;
|
||||
interrupts = <22 4>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
i2c@0 {
|
||||
compatible = "i2c-gpio";
|
||||
gpios = <&pioA 30 0 /* sda */
|
||||
&pioA 31 0 /* scl */
|
||||
>;
|
||||
i2c-gpio,sda-open-drain;
|
||||
i2c-gpio,scl-open-drain;
|
||||
i2c-gpio,delay-us = <2>; /* ~100 kHz */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@1 {
|
||||
compatible = "i2c-gpio";
|
||||
gpios = <&pioC 0 0 /* sda */
|
||||
&pioC 1 0 /* scl */
|
||||
>;
|
||||
i2c-gpio,sda-open-drain;
|
||||
i2c-gpio,scl-open-drain;
|
||||
i2c-gpio,delay-us = <2>; /* ~100 kHz */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@2 {
|
||||
compatible = "i2c-gpio";
|
||||
gpios = <&pioB 4 0 /* sda */
|
||||
&pioB 5 0 /* scl */
|
||||
>;
|
||||
i2c-gpio,sda-open-drain;
|
||||
i2c-gpio,scl-open-drain;
|
||||
i2c-gpio,delay-us = <2>; /* ~100 kHz */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -12,6 +12,51 @@
|
|||
reg = <0x20000000 0x8000000>;
|
||||
};
|
||||
|
||||
clocks {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
main_clock: clock@0 {
|
||||
compatible = "atmel,osc", "fixed-clock";
|
||||
clock-frequency = <12000000>;
|
||||
};
|
||||
};
|
||||
|
||||
ahb {
|
||||
nand0: nand@40000000 {
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-mode = "soft";
|
||||
nand-on-flash-bbt;
|
||||
status = "okay";
|
||||
|
||||
at91bootstrap@0 {
|
||||
label = "at91bootstrap";
|
||||
reg = <0x0 0x40000>;
|
||||
};
|
||||
|
||||
uboot@40000 {
|
||||
label = "u-boot";
|
||||
reg = <0x40000 0x80000>;
|
||||
};
|
||||
|
||||
ubootenv@c0000 {
|
||||
label = "U-Boot Env";
|
||||
reg = <0xc0000 0x140000>;
|
||||
};
|
||||
|
||||
kernel@200000 {
|
||||
label = "kernel";
|
||||
reg = <0x200000 0x600000>;
|
||||
};
|
||||
|
||||
rootfs@800000 {
|
||||
label = "rootfs";
|
||||
reg = <0x800000 0x1f800000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
|
|
|
|||
275
arch/arm/boot/dts/db8500.dtsi
Normal file
275
arch/arm/boot/dts/db8500.dtsi
Normal file
|
|
@ -0,0 +1,275 @@
|
|||
/*
|
||||
* Copyright 2012 Linaro Ltd
|
||||
*
|
||||
* The code contained herein is licensed under the GNU General Public
|
||||
* License. You may obtain a copy of the GNU General Public License
|
||||
* Version 2 or later at the following locations:
|
||||
*
|
||||
* http://www.opensource.org/licenses/gpl-license.html
|
||||
* http://www.gnu.org/copyleft/gpl.html
|
||||
*/
|
||||
|
||||
/include/ "skeleton.dtsi"
|
||||
|
||||
/ {
|
||||
soc-u9500 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "stericsson,db8500";
|
||||
interrupt-parent = <&intc>;
|
||||
ranges;
|
||||
|
||||
intc: interrupt-controller@a0411000 {
|
||||
compatible = "arm,cortex-a9-gic";
|
||||
#interrupt-cells = <3>;
|
||||
#address-cells = <1>;
|
||||
interrupt-controller;
|
||||
interrupt-parent;
|
||||
reg = <0xa0411000 0x1000>,
|
||||
<0xa0410100 0x100>;
|
||||
};
|
||||
|
||||
L2: l2-cache {
|
||||
compatible = "arm,pl310-cache";
|
||||
reg = <0xa0412000 0x1000>;
|
||||
interrupts = <0 13 4>;
|
||||
cache-unified;
|
||||
cache-level = <2>;
|
||||
};
|
||||
|
||||
pmu {
|
||||
compatible = "arm,cortex-a9-pmu";
|
||||
interrupts = <0 7 0x4>;
|
||||
};
|
||||
|
||||
timer@a0410600 {
|
||||
compatible = "arm,cortex-a9-twd-timer";
|
||||
reg = <0xa0410600 0x20>;
|
||||
interrupts = <1 13 0x304>;
|
||||
};
|
||||
|
||||
rtc@80154000 {
|
||||
compatible = "stericsson,db8500-rtc";
|
||||
reg = <0x80154000 0x1000>;
|
||||
interrupts = <0 18 0x4>;
|
||||
};
|
||||
|
||||
gpio0: gpio@8012e000 {
|
||||
compatible = "stericsson,db8500-gpio",
|
||||
"stmicroelectronics,nomadik-gpio";
|
||||
reg = <0x8012e000 0x80>;
|
||||
interrupts = <0 119 0x4>;
|
||||
supports-sleepmode;
|
||||
gpio-controller;
|
||||
};
|
||||
|
||||
gpio1: gpio@8012e080 {
|
||||
compatible = "stericsson,db8500-gpio",
|
||||
"stmicroelectronics,nomadik-gpio";
|
||||
reg = <0x8012e080 0x80>;
|
||||
interrupts = <0 120 0x4>;
|
||||
supports-sleepmode;
|
||||
gpio-controller;
|
||||
};
|
||||
|
||||
gpio2: gpio@8000e000 {
|
||||
compatible = "stericsson,db8500-gpio",
|
||||
"stmicroelectronics,nomadik-gpio";
|
||||
reg = <0x8000e000 0x80>;
|
||||
interrupts = <0 121 0x4>;
|
||||
supports-sleepmode;
|
||||
gpio-controller;
|
||||
};
|
||||
|
||||
gpio3: gpio@8000e080 {
|
||||
compatible = "stericsson,db8500-gpio",
|
||||
"stmicroelectronics,nomadik-gpio";
|
||||
reg = <0x8000e080 0x80>;
|
||||
interrupts = <0 122 0x4>;
|
||||
supports-sleepmode;
|
||||
gpio-controller;
|
||||
};
|
||||
|
||||
gpio4: gpio@8000e100 {
|
||||
compatible = "stericsson,db8500-gpio",
|
||||
"stmicroelectronics,nomadik-gpio";
|
||||
reg = <0x8000e100 0x80>;
|
||||
interrupts = <0 123 0x4>;
|
||||
supports-sleepmode;
|
||||
gpio-controller;
|
||||
};
|
||||
|
||||
gpio5: gpio@8000e180 {
|
||||
compatible = "stericsson,db8500-gpio",
|
||||
"stmicroelectronics,nomadik-gpio";
|
||||
reg = <0x8000e180 0x80>;
|
||||
interrupts = <0 124 0x4>;
|
||||
supports-sleepmode;
|
||||
gpio-controller;
|
||||
};
|
||||
|
||||
gpio6: gpio@8011e000 {
|
||||
compatible = "stericsson,db8500-gpio",
|
||||
"stmicroelectronics,nomadik-gpio";
|
||||
reg = <0x8011e000 0x80>;
|
||||
interrupts = <0 125 0x4>;
|
||||
supports-sleepmode;
|
||||
gpio-controller;
|
||||
};
|
||||
|
||||
gpio7: gpio@8011e080 {
|
||||
compatible = "stericsson,db8500-gpio",
|
||||
"stmicroelectronics,nomadik-gpio";
|
||||
reg = <0x8011e080 0x80>;
|
||||
interrupts = <0 126 0x4>;
|
||||
supports-sleepmode;
|
||||
gpio-controller;
|
||||
};
|
||||
|
||||
gpio8: gpio@a03fe000 {
|
||||
compatible = "stericsson,db8500-gpio",
|
||||
"stmicroelectronics,nomadik-gpio";
|
||||
reg = <0xa03fe000 0x80>;
|
||||
interrupts = <0 127 0x4>;
|
||||
supports-sleepmode;
|
||||
gpio-controller;
|
||||
};
|
||||
|
||||
usb@a03e0000 {
|
||||
compatible = "stericsson,db8500-musb",
|
||||
"mentor,musb";
|
||||
reg = <0xa03e0000 0x10000>;
|
||||
interrupts = <0 23 0x4>;
|
||||
};
|
||||
|
||||
dma-controller@801C0000 {
|
||||
compatible = "stericsson,db8500-dma40",
|
||||
"stericsson,dma40";
|
||||
reg = <0x801C0000 0x1000 0x40010000 0x800>;
|
||||
interrupts = <0 25 0x4>;
|
||||
};
|
||||
|
||||
prcmu@80157000 {
|
||||
compatible = "stericsson,db8500-prcmu";
|
||||
reg = <0x80157000 0x1000>;
|
||||
interrupts = <46 47>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
ab8500@5 {
|
||||
compatible = "stericsson,ab8500";
|
||||
reg = <5>; /* mailbox 5 is i2c */
|
||||
interrupts = <0 40 0x4>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@80004000 {
|
||||
compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
|
||||
reg = <0x80004000 0x1000>;
|
||||
interrupts = <0 21 0x4>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
i2c@80122000 {
|
||||
compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
|
||||
reg = <0x80122000 0x1000>;
|
||||
interrupts = <0 22 0x4>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
i2c@80128000 {
|
||||
compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
|
||||
reg = <0x80128000 0x1000>;
|
||||
interrupts = <0 55 0x4>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
i2c@80110000 {
|
||||
compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
|
||||
reg = <0x80110000 0x1000>;
|
||||
interrupts = <0 12 0x4>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
i2c@8012a000 {
|
||||
compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
|
||||
reg = <0x8012a000 0x1000>;
|
||||
interrupts = <0 51 0x4>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
ssp@80002000 {
|
||||
compatible = "arm,pl022", "arm,primecell";
|
||||
reg = <80002000 0x1000>;
|
||||
interrupts = <0 14 0x4>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
|
||||
// Add one of these for each child device
|
||||
cs-gpios = <&gpio0 31 &gpio4 14 &gpio4 16 &gpio6 22 &gpio7 0>;
|
||||
|
||||
};
|
||||
|
||||
uart@80120000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0x80120000 0x1000>;
|
||||
interrupts = <0 11 0x4>;
|
||||
status = "disabled";
|
||||
};
|
||||
uart@80121000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0x80121000 0x1000>;
|
||||
interrupts = <0 19 0x4>;
|
||||
status = "disabled";
|
||||
};
|
||||
uart@80007000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0x80007000 0x1000>;
|
||||
interrupts = <0 26 0x4>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sdi@80126000 {
|
||||
compatible = "arm,pl18x", "arm,primecell";
|
||||
reg = <0x80126000 0x1000>;
|
||||
interrupts = <0 60 0x4>;
|
||||
status = "disabled";
|
||||
};
|
||||
sdi@80118000 {
|
||||
compatible = "arm,pl18x", "arm,primecell";
|
||||
reg = <0x80118000 0x1000>;
|
||||
interrupts = <0 50 0x4>;
|
||||
status = "disabled";
|
||||
};
|
||||
sdi@80005000 {
|
||||
compatible = "arm,pl18x", "arm,primecell";
|
||||
reg = <0x80005000 0x1000>;
|
||||
interrupts = <0 41 0x4>;
|
||||
status = "disabled";
|
||||
};
|
||||
sdi@80119000 {
|
||||
compatible = "arm,pl18x", "arm,primecell";
|
||||
reg = <0x80119000 0x1000>;
|
||||
interrupts = <0 59 0x4>;
|
||||
status = "disabled";
|
||||
};
|
||||
sdi@80114000 {
|
||||
compatible = "arm,pl18x", "arm,primecell";
|
||||
reg = <0x80114000 0x1000>;
|
||||
interrupts = <0 99 0x4>;
|
||||
status = "disabled";
|
||||
};
|
||||
sdi@80008000 {
|
||||
compatible = "arm,pl18x", "arm,primecell";
|
||||
reg = <0x80114000 0x1000>;
|
||||
interrupts = <0 100 0x4>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -4,7 +4,7 @@
|
|||
|
||||
/ {
|
||||
model = "Globalscale Technologies Dreamplug";
|
||||
compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
|
||||
compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "mrvl,kirkwood-88f6281", "mrvl,kirkwood";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
|
|
@ -15,11 +15,10 @@
|
|||
bootargs = "console=ttyS0,115200n8 earlyprintk";
|
||||
};
|
||||
|
||||
serial@f1012000 {
|
||||
compatible = "ns16550a";
|
||||
reg = <0xf1012000 0xff>;
|
||||
reg-shift = <2>;
|
||||
interrupts = <33>;
|
||||
clock-frequency = <200000000>;
|
||||
ocp@f1000000 {
|
||||
serial@12000 {
|
||||
clock-frequency = <200000000>;
|
||||
status = "ok"
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -1,6 +1,36 @@
|
|||
/include/ "skeleton.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "marvell,kirkwood";
|
||||
};
|
||||
compatible = "mrvl,kirkwood";
|
||||
|
||||
ocp@f1000000 {
|
||||
compatible = "simple-bus";
|
||||
ranges = <0 0xf1000000 0x1000000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
serial@12000 {
|
||||
compatible = "ns16550a";
|
||||
reg = <0x12000 0x100>;
|
||||
reg-shift = <2>;
|
||||
interrupts = <33>;
|
||||
/* set clock-frequency in board dts */
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
serial@12100 {
|
||||
compatible = "ns16550a";
|
||||
reg = <0x12100 0x100>;
|
||||
reg-shift = <2>;
|
||||
interrupts = <34>;
|
||||
/* set clock-frequency in board dts */
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
rtc@10300 {
|
||||
compatible = "mrvl,kirkwood-rtc", "mrvl,orion-rtc";
|
||||
reg = <0x10300 0x20>;
|
||||
interrupts = <53>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
139
arch/arm/boot/dts/snowball.dts
Normal file
139
arch/arm/boot/dts/snowball.dts
Normal file
|
|
@ -0,0 +1,139 @@
|
|||
/*
|
||||
* Copyright 2011 ST-Ericsson AB
|
||||
*
|
||||
* The code contained herein is licensed under the GNU General Public
|
||||
* License. You may obtain a copy of the GNU General Public License
|
||||
* Version 2 or later at the following locations:
|
||||
*
|
||||
* http://www.opensource.org/licenses/gpl-license.html
|
||||
* http://www.gnu.org/copyleft/gpl.html
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/include/ "db8500.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Calao Systems Snowball platform with device tree";
|
||||
compatible = "calaosystems,snowball-a9500";
|
||||
|
||||
memory {
|
||||
reg = <0x00000000 0x20000000>;
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
button@1 {
|
||||
debounce_interval = <50>;
|
||||
wakeup = <1>;
|
||||
linux,code = <2>;
|
||||
label = "userpb";
|
||||
gpios = <&gpio1 0>;
|
||||
};
|
||||
button@2 {
|
||||
debounce_interval = <50>;
|
||||
wakeup = <1>;
|
||||
linux,code = <3>;
|
||||
label = "userpb";
|
||||
gpios = <&gpio4 23>;
|
||||
};
|
||||
button@3 {
|
||||
debounce_interval = <50>;
|
||||
wakeup = <1>;
|
||||
linux,code = <4>;
|
||||
label = "userpb";
|
||||
gpios = <&gpio4 23>;
|
||||
};
|
||||
button@4 {
|
||||
debounce_interval = <50>;
|
||||
wakeup = <1>;
|
||||
linux,code = <5>;
|
||||
label = "userpb";
|
||||
gpios = <&gpio5 1>;
|
||||
};
|
||||
button@5 {
|
||||
debounce_interval = <50>;
|
||||
wakeup = <1>;
|
||||
linux,code = <6>;
|
||||
label = "userpb";
|
||||
gpios = <&gpio5 2>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
used-led {
|
||||
label = "user_led";
|
||||
gpios = <&gpio4 14>;
|
||||
};
|
||||
};
|
||||
|
||||
soc-u9500 {
|
||||
|
||||
external-bus@50000000 {
|
||||
compatible = "simple-bus";
|
||||
reg = <0x50000000 0x10000000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
ethernet@50000000 {
|
||||
compatible = "smsc,9111";
|
||||
reg = <0x50000000 0x10000>;
|
||||
interrupts = <12>;
|
||||
interrupt-parent = <&gpio4>;
|
||||
};
|
||||
};
|
||||
|
||||
sdi@80126000 {
|
||||
status = "enabled"
|
||||
cd-gpios = <&gpio6 26>;
|
||||
};
|
||||
|
||||
sdi@80114000 {
|
||||
status = "enabled"
|
||||
};
|
||||
|
||||
uart@80120000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
uart@80121000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
uart@80007000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
i2c@80004000 {
|
||||
tc3589x@42 {
|
||||
//compatible = "tc3589x";
|
||||
reg = <0x42>;
|
||||
interrupts = <25>;
|
||||
interrupt-parent = <&gpio6>;
|
||||
};
|
||||
tps61052@33 {
|
||||
//compatible = "tps61052";
|
||||
reg = <0x33>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@80128000 {
|
||||
lp5521@0x33 {
|
||||
// compatible = "lp5521";
|
||||
reg = <0x33>;
|
||||
};
|
||||
lp5521@0x34 {
|
||||
// compatible = "lp5521";
|
||||
reg = <0x34>;
|
||||
};
|
||||
bh1780@0x29 {
|
||||
// compatible = "rohm,bh1780gli";
|
||||
reg = <0x33>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
47
arch/arm/boot/dts/spear600-evb.dts
Normal file
47
arch/arm/boot/dts/spear600-evb.dts
Normal file
|
|
@ -0,0 +1,47 @@
|
|||
/*
|
||||
* Copyright 2012 Stefan Roese <sr@denx.de>
|
||||
*
|
||||
* The code contained herein is licensed under the GNU General Public
|
||||
* License. You may obtain a copy of the GNU General Public License
|
||||
* Version 2 or later at the following locations:
|
||||
*
|
||||
* http://www.opensource.org/licenses/gpl-license.html
|
||||
* http://www.gnu.org/copyleft/gpl.html
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/include/ "spear600.dtsi"
|
||||
|
||||
/ {
|
||||
model = "ST SPEAr600 Evaluation Board";
|
||||
compatible = "st,spear600-evb", "st,spear600";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0 0x10000000>;
|
||||
};
|
||||
|
||||
ahb {
|
||||
gmac: ethernet@e0800000 {
|
||||
phy-mode = "gmii";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
apb {
|
||||
serial@d0000000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
serial@d0080000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
i2c@d0200000 {
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
174
arch/arm/boot/dts/spear600.dtsi
Normal file
174
arch/arm/boot/dts/spear600.dtsi
Normal file
|
|
@ -0,0 +1,174 @@
|
|||
/*
|
||||
* Copyright 2012 Stefan Roese <sr@denx.de>
|
||||
*
|
||||
* The code contained herein is licensed under the GNU General Public
|
||||
* License. You may obtain a copy of the GNU General Public License
|
||||
* Version 2 or later at the following locations:
|
||||
*
|
||||
* http://www.opensource.org/licenses/gpl-license.html
|
||||
* http://www.gnu.org/copyleft/gpl.html
|
||||
*/
|
||||
|
||||
/include/ "skeleton.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "st,spear600";
|
||||
|
||||
cpus {
|
||||
cpu@0 {
|
||||
compatible = "arm,arm926ejs";
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0 0x40000000>;
|
||||
};
|
||||
|
||||
ahb {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "simple-bus";
|
||||
ranges = <0xd0000000 0xd0000000 0x30000000>;
|
||||
|
||||
vic0: interrupt-controller@f1100000 {
|
||||
compatible = "arm,pl190-vic";
|
||||
interrupt-controller;
|
||||
reg = <0xf1100000 0x1000>;
|
||||
#interrupt-cells = <1>;
|
||||
};
|
||||
|
||||
vic1: interrupt-controller@f1000000 {
|
||||
compatible = "arm,pl190-vic";
|
||||
interrupt-controller;
|
||||
reg = <0xf1000000 0x1000>;
|
||||
#interrupt-cells = <1>;
|
||||
};
|
||||
|
||||
gmac: ethernet@e0800000 {
|
||||
compatible = "st,spear600-gmac";
|
||||
reg = <0xe0800000 0x8000>;
|
||||
interrupt-parent = <&vic1>;
|
||||
interrupts = <24 23>;
|
||||
interrupt-names = "macirq", "eth_wake_irq";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
fsmc: flash@d1800000 {
|
||||
compatible = "st,spear600-fsmc-nand";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0xd1800000 0x1000 /* FSMC Register */
|
||||
0xd2000000 0x4000>; /* NAND Base */
|
||||
reg-names = "fsmc_regs", "nand_data";
|
||||
st,ale-off = <0x20000>;
|
||||
st,cle-off = <0x10000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
smi: flash@fc000000 {
|
||||
compatible = "st,spear600-smi";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0xfc000000 0x1000>;
|
||||
interrupt-parent = <&vic1>;
|
||||
interrupts = <12>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ehci@e1800000 {
|
||||
compatible = "st,spear600-ehci", "usb-ehci";
|
||||
reg = <0xe1800000 0x1000>;
|
||||
interrupt-parent = <&vic1>;
|
||||
interrupts = <27>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ehci@e2000000 {
|
||||
compatible = "st,spear600-ehci", "usb-ehci";
|
||||
reg = <0xe2000000 0x1000>;
|
||||
interrupt-parent = <&vic1>;
|
||||
interrupts = <29>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ohci@e1900000 {
|
||||
compatible = "st,spear600-ohci", "usb-ohci";
|
||||
reg = <0xe1900000 0x1000>;
|
||||
interrupt-parent = <&vic1>;
|
||||
interrupts = <26>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ohci@e2100000 {
|
||||
compatible = "st,spear600-ohci", "usb-ohci";
|
||||
reg = <0xe2100000 0x1000>;
|
||||
interrupt-parent = <&vic1>;
|
||||
interrupts = <28>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
apb {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "simple-bus";
|
||||
ranges = <0xd0000000 0xd0000000 0x30000000>;
|
||||
|
||||
serial@d0000000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0xd0000000 0x1000>;
|
||||
interrupt-parent = <&vic0>;
|
||||
interrupts = <24>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
serial@d0080000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0xd0080000 0x1000>;
|
||||
interrupt-parent = <&vic0>;
|
||||
interrupts = <25>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/* local/cpu GPIO */
|
||||
gpio0: gpio@f0100000 {
|
||||
#gpio-cells = <2>;
|
||||
compatible = "arm,pl061", "arm,primecell";
|
||||
gpio-controller;
|
||||
reg = <0xf0100000 0x1000>;
|
||||
interrupt-parent = <&vic0>;
|
||||
interrupts = <18>;
|
||||
};
|
||||
|
||||
/* basic GPIO */
|
||||
gpio1: gpio@fc980000 {
|
||||
#gpio-cells = <2>;
|
||||
compatible = "arm,pl061", "arm,primecell";
|
||||
gpio-controller;
|
||||
reg = <0xfc980000 0x1000>;
|
||||
interrupt-parent = <&vic1>;
|
||||
interrupts = <19>;
|
||||
};
|
||||
|
||||
/* appl GPIO */
|
||||
gpio2: gpio@d8100000 {
|
||||
#gpio-cells = <2>;
|
||||
compatible = "arm,pl061", "arm,primecell";
|
||||
gpio-controller;
|
||||
reg = <0xd8100000 0x1000>;
|
||||
interrupt-parent = <&vic1>;
|
||||
interrupts = <4>;
|
||||
};
|
||||
|
||||
i2c@d0200000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "snps,designware-i2c";
|
||||
reg = <0xd0200000 0x1000>;
|
||||
interrupt-parent = <&vic0>;
|
||||
interrupts = <28>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
Some files were not shown because too many files have changed in this diff Show more
Loading…
Reference in a new issue